We numerically demonstrate atomic Fabry-Perot resonances for a pulsed interacting Bose-Einstein condensate (BEC) source transmitting through double Gaussian barriers. These resonances are observable for an experimentally-feasible parameter choice, which we determined using a previously-developed analytical model for a plane matter-wave incident on a double rectangular barrier system. Through numerical simulations using the non-polynomial Schödinger equation-an effective one-dimensional Gross-Pitaevskii equation-we investigate the effect of atom number, scattering length, and BEC momentum width on the resonant transmission peaks. For [Formula: see text]Rb atomic sources with the current experimentally-achievable momentum width of [Formula: see text] [[Formula: see text]], we show that reasonably high contrast Fabry-Perot resonant transmission peaks can be observed using (a) non-interacting BECs, (b) interacting BECs of [Formula: see text] atoms with s-wave scattering lengths [Formula: see text] ([Formula: see text] is the Bohr radius), and (c) interacting BECs of [Formula: see text] atoms with [Formula: see text]. Our theoretical investigation impacts any future experimental realization of an atomic Fabry-Perot interferometer with an ultracold atomic source.
We numerically demonstrate atomic Fabry-Perot resonances for a pulsed interacting Bose-Einstein condensate (BEC) source transmitting through double Gaussian barriers. These resonances are observable for an experimentally-feasible parameter choice, which we determined using a previously-developed analytical model for a plane matter-wave incident on a double rectangular barrier system. Through numerical simulations using the non-polynomial Schödinger equation-an effective one-dimensional Gross-Pitaevskii equation-we investigate the effect of atom number, scattering length, and BEC momentum width on the resonant transmission peaks. For [Formula: see text]Rb atomic sources with the current experimentally-achievable momentum width of [Formula: see text] [[Formula: see text]], we show that reasonably high contrast Fabry-Perot resonant transmission peaks can be observed using (a) non-interacting BECs, (b) interacting BECs of [Formula: see text] atoms with s-wave scattering lengths [Formula: see text] ([Formula: see text] is the Bohr radius), and (c) interacting BECs of [Formula: see text] atoms with [Formula: see text]. Our theoretical investigation impacts any future experimental realization of an atomic Fabry-Perot interferometer with an ultracold atomic source.
This thesis presents a theoretical investigation into the transmission and tunneling dynamics of a Bose-Einstein condensate (BEC) through single and double barriers. We show how quantum tunneling differs from transmission and provide a method for separating them out. We then focus on finding an experimentally-realisable parameter regime for making an atomic Fabry-Perot interferometer (FPI) using two repulsive barriers and study how interatomic interactions affect the dynamics of resonant transmission. Finally, we show that an atomic FPI can be used as an acceleration sensor and we compare its sensitivity to that of a Mach-Zehnder atom interferometer. We first investigate the transmission of an interacting BEC incident on a repulsive Gaussian barrier through numerical simulation. We study the dynamics associated with interatomic interactions across a broad parameter range not previously explored. Comparing effective one-dimensional Gross-Pitaevskii equation (GPE) simulations to classical Boltzmann-Vlasov equation (BVE) simulations, we isolate purely coherent matterwave effects. We then define quantum tunneling as the portion of the GPE transmission not described by the classical BVE. Transmission shows an exponential dependence on barrier height in the classical simulation, suggesting that observing such an exponential dependence is not a sufficient condition for quantum tunneling. Furthermore, we find that the transmission is predominately described by classical effects, although interatomic interactions modify the magnitude of the quantum tunneling. We show that the interactions also affect the amount of classical transmission, producing transmission in regions where the non-interacting equivalent has none. This theoretical investigation clarifies the contribution quantum tunneling makes to overall transmission in many-particle interacting systems, potentially informing future tunneling experiments with ultracold atoms. In the second part, we numerically demonstrate atomic Fabry-Perot resonances for a pulsed interacting BEC source transmitting through double Gaussian barriers. These resonances are observable for an experimentally-feasible parameter choice. By simulating an effective one-dimensional GPE, we investigate the effect of atom number, scattering length, and BEC momentum width on the resonant transmission peaks. For Rb-85 atomic sources with the current experimentally-achievable momentum width, we show that reasonably high contrast Fabry-Perot resonant transmission peaks can be observed using a) non-interacting BECs of 100000 atoms, b) interacting BECs of 100000 atoms with s-wave scattering lengths a_s= +-0.1a_0, and c) interacting BECs of 1000 atoms with a_s=+-1.0a_0. Our theoretical investigation impacts any future experimental realisation of an atomic Fabry-Perot interferometer with an ultracold atomic source. Finally, we explore the possibility of using an atomic FPI as an acceleration sensor. Using Fisher information, we quantify the acceleration sensitivity of the system. We study the dependence of sensitivity on various parameters of the system and determine the optimum parameter regime that gives the best sensitivity. For a BEC with infinitely narrow momentum width, the sensitivity can be improved without limit by increasing cavity length. However, when the atomic cloud has a finite momentum width, there exists an optimum cavity length corresponding to each momentum width. By comparing the sensitivity of the atomic FPI to that of a Mach-Zender interferometer with similar parameters, we show that the sensitivity of the atomic FPI overcomes that of the Mach-Zehnder interferometer in low device length and low momentum width regimes. In short, we demonstrate that an atomic FPI can be successfully used for sensing acceleration and the sensitivity of the device can be increased by reducing its length and by using a BEC with lower momentum width compared to the cavity linewidth.
While a Fabry-Perot (FP) cavity interferometer is a standard tool in modern optics, analogous physics can also be observed with matter waves such as Bose-Einstein condensates (BECs). Interatomic collisions in BECs can induce nonlinear features such as multi-valued transmission spectra for interferometry experiments. Observation of interaction effects in the matter-wave analogue of FP interferometry has not yet been experimentally achieved, mostly due to broadening of transmission peaks by interaction-induced shifts of cavity resonances. In this work, we theoretically show that this limitation can be overcome by engineering a momentum chirp in a BEC wavepacket. By balancing this chirp against the dynamical mean-field energy shift of the cavity during transmission, we predict enhanced resonant spectra and bistability features due to interaction-assisted tunneling that would be otherwise inaccessible. We show that this physics is readily observable with quasi-one-dimensional BECs of cold atoms colliding with a pair of light-induced Gaussian potential barriers forming the cavity. We also benchmark the requisite optimum chirp needed and characterize the contrast of near-discontinuous FP transmission spectra at an interacting resonance. Our findings enable the realization of technologies like matter-wave switching protocols, and high-precision velocity measurements; estimates of achievable sensitivity for the latter are provided.
Bose-Einstein condensates are coherent matter waves, produced by cooling gaseous atomic clouds to ultra-low temperatures. For applications in atom interferometry and precision measurements, Bose-condensed sources present an intriguing alternative to thermal atoms. Although the current sensitivity achievable with interferometers using coherent atoms is not comparable to thermal beam machines (mainly due to the lower flux), there are promising ways to utilise the potential of Bose-condensed sources for atom interferometry. Among those is the low momentum width of Bose-Einstein condensates, which can generally be well controlled and is advantageous for increased interferometric sensitivities by implementing large momentum transfer beam splitters. As part of this thesis, experimental and theoretical investigations are presented to investigate the potential of Bose-Einstein condensates for such applications. We shall present the quantum projection noise limited performance of a Ramsey interferometer operating on the atomic clock transition of a freely expanding cloud of Bose-condensed rubidium 87 atoms. The results include Ramsey fringes of high visibility, not measurably affected by atomic interaction-induced dephasing effects. The achievement and detection of the quantum projection noise limit rely critically on the precision and accuracy of both the imaging setup and the coupling scheme in the interferometric beam splitters. The stabilisation of the beam splitters via an optical Sagnac interferometer is the basis for the quantum projection noise limited performance of the interferometer presented. For an increase of bandwidth and flux in atom interferometric measurements, it is advantageous to use a continuous atomic beam. A truly continuous coherent atom source has not been realised to date, and we present results on a pumping mechanism in this thesis, as a decisive step towards a continuous atom laser. By the investigation of different momentum resonances, we find that the pumping scheme relies on a Raman superradiance-like process. Finally, the thesis demonstrates two interaction measurements in rubidium. The strong mean field interactions due to the high densities in Bose-Einstein condensates are used to probe the potential of a rubidium 87 condensate with an atom laser. The measurement allows a determination of the scattering length between the two atomic states involved. In addition to this two-body scattering scheme, we present a measurement of three-body loss coefficients, extracted from loss curves in rubidium 85 Bose-Einstein condensates. The measurement provides new upper bounds on the three-body loss coefficients at the scattering lengths considered.
This work presents a numerical study of a tunnelingbased interferometer implemented using a Bose-Einstein condensate (BEC) confined in a static double-well potential, where the condensate dynamics are simulated using the one-dimensional Gross-Pitaevskii equation to capture the essential mean-field behavior. By carefully configuring the central barrier parameters, the double well is engineered to act as a coherent matterwave beam splitter. A relative phase is introduced between the two arms of the interferometer, enabling the extraction of phase information through interference. We analyze the resulting interference contrast to determine the best barrier configurations that allow the system to function effectively as an interferometer. It was found that the interferometric contrast remains robust under realistic fluctuations in the barrier parameters, confirming experimental feasibility. Using a fixed barrier for both the splitting and recombination steps, we avoid the need to dynamically ramp the barrier, as in other approaches. This allows us to realize a simple and experimentally accessible interferometry scheme in the double-well potential.
We realize textbook experiments on Bose-Einstein condensate tunneling through thin repulsive potential barriers. In particular, we demonstrate atom tunneling though a single optical barrier in the quantum scattering regime where the de Broglie wavelength of the atoms is larger than the barrier width. Such a beam splitter can be used for atom interferometry and we study the case of two barriers creating an atomic Fabry-P\'erot cavity. Technically, the velocity spread of the atoms is reduced due to the use of a 39K Bose-Einstein condensate with no interactions. The potential barriers are created optically and their width is tunable due to the use of a digital micromirror device. In addition, our scattering experiments enable in situ characterization of the optical aberrations of the barrier optical system.
Bright solitons in a quasi-1D Bose–Einstein condensate can be used to enhance precision in matter-wave interferometry, due to their inherent robustness and support against dispersion. Such a soliton interferometer typically relies on a potential barrier used to split a single soliton into two smaller coherent solitons which can then be recombined on the same barrier. In this thesis we examine two extensions to this scheme. Firstly, we investigate a binary BEC system consisting of two bright solitons which are coupled through a mutual nonlinear interaction term. We derive a set of conditions under which the two components can be separated on a potential barrier and use numerical simulations to probe the regimes beyond which this mathematical treatment is applicable. We then use the numerical simulations to look at the effect of the nonlinear coupling on the dynamics of the binary solitons interacting with the barrier. We also look at the interference behaviour found by doubling the simulation time in either a ring trap or a harmonic trapping potential (to ensure recombination on the barrier); as well as the case where the solitons start spatially separated on either side of the barrier in order to find conditions under which the solitons will combine on the barrier. We find a good agreement between the analytical predictions and the results of simulations. Beyond the regions of parameter space where the predictions are expected to hold, we find complex transmission and interference behaviour as a result of nonlinear effects. The second part of this thesis consists of an examination of the prospect of using a subwavelength barrier scheme in a soliton interferometry experiment. This involves using two resonant coupling beams in a Λ-system with a spatially varying intensity. Under certain conditions, this can be used to form an effective potential barrier with a width which is not diffraction-limited. We look at suitable parameter regimes for such a barrier to split and recombine solitons in an interferometer and probe the effects of possible complications such as misalignment in the beams and different scattering lengths in the different states. We simulate the soliton interferometer using the full three component GPE as well as the single component analogue with the effective potential in order to characterise the soliton behaviour and the dependence of the interferometer sensitivity on the system parameters. We find a trend towards an idealised soliton interferometer with a decreasing value of the parameter, w, controlling the barrier characteristics. Also, we demonstrate an agreement between the relevant three component GPE and the analogous single component GPE, in the limit of strong coupling fields.