Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1912.03671 · Nature Communications

On-chip coherent microwave-to-optical transduction mediated by ytterbium in YVO4

John G. Bartholomew, Jake Rochman, Tian Xie, Jonathan M. Kindem, Andrei Ruskuc, Ioana Craiciu, Mi Lei, Andrei Faraon

Published Jun 29, 2020• 125 citations
arXivHTMLPDF

Abstract

Optical networks that distribute entanglement among various quantum systems will form a powerful framework for quantum science but are yet to interface with leading quantum hardware such as superconducting qubits. Consequently, these systems remain isolated because microwave links at room temperature are noisy and lossy. Building long distance connectivity requires interfaces that map quantum information between microwave and optical fields. While preliminary microwave-to-optical transducers have been realized, developing efficient, low-noise devices that match superconducting qubit frequencies (gigahertz) and bandwidths (10 kilohertz - 1 megahertz) remains a challenge. Here we demonstrate a proof-of-concept on-chip transducer using trivalent ytterbium-171 ions in yttrium orthovanadate coupled to a nanophotonic waveguide and a microwave transmission line. The device's miniaturization, material, and zero-magnetic-field operation are important advances for rare-earth ion magneto-optical devices. Further integration with high quality factor microwave and optical resonators will enable efficient transduction and create opportunities toward multi-platform quantum networks.

DOI
10.1038/s41467-020-16996-x

Related papers

On-chip coherent microwave-to-optical transduction mediated by ytterbium in YVO4

John G. Bartholomew, Jake Rochman, Tian Xie +5 more

Abstract Optical networks that distribute entanglement among various quantum systems will form a powerful framework for quantum science but are yet to interface with leading quantum hardware such as superconducting qubits. Consequently, these systems remain isolated because microwave links at room temperature are noisy and lossy. Building long distance connectivity requires interfaces that map quantum information between microwave and optical fields. While preliminary microwave-to-optical transducers have been realized, developing efficient, low-noise devices that match superconducting qubit frequencies (gigahertz) and bandwidths (10 kilohertz – 1 megahertz) remains a challenge. Here we demonstrate a proof-of-concept on-chip transducer using trivalent ytterbium-171 ions in yttrium orthovanadate coupled to a nanophotonic waveguide and a microwave transmission line. The device′s miniaturization, material, and zero-magnetic-field operation are important advances for rare-earth ion magneto-optical devices. Further integration with high quality factor microwave and optical resonators will enable efficient transduction and create opportunities toward multi-platform quantum networks.

•Jan 1, 2020•111 citations

Microwave-to-optical transduction with erbium ions coupled to planar photonic and superconducting resonators

Jake Rochman, Tian Xie, John G. Bartholomew +2 more

Abstract Optical quantum networks can connect distant quantum processors to enable secure quantum communication and distributed quantum computing. Superconducting qubits are a leading technology for quantum information processing but cannot couple to long-distance optical networks without an efficient, coherent, and low noise interface between microwave and optical photons. Here, we demonstrate a microwave-to-optical transducer using an ensemble of erbium ions that is simultaneously coupled to a superconducting microwave resonator and a nanophotonic optical resonator. The coherent atomic transitions of the ions mediate the frequency conversion from microwave photons to optical photons and using photon counting we observed device conversion efficiency approaching 10 −7 . With pulsed operation at a low duty cycle, the device maintained a spin temperature below 100 mK and microwave resonator heating of less than 0.15 quanta.

Nature Communications•Mar 1, 2023•48 citations

On-chip Microwave-to-Optical Transducer Based on Rare-Earth Ions

Tian Xie, Jake Rochman, John G. Bartholomew +2 more

Microwave-to-optical transduction is essential for connecting superconducting platforms with optical quantum networks. We demonstrate coherent transduction in both continuous-wave and pulsed mode using rare-earth ions with an integrated superconducting microwave resonator and nanophotonic optical resonator.

Conference on Lasers and Electro-Optics•Jan 1, 2022•1 citation

Toward Scalable Heterogeneous Quantum Networks: Microwave-Optical Transduction Across Platforms

Tarvir Anjum Aditto, Jaiyan Sadid Ifty, Khondokar Zahin

The development of scalable quantum networks requires coherent interfaces capable of converting microwave photons used in superconducting quantum processors into optical photons suitable for long-distance fiber transmission. This review surveys recent progress in microwave-to-optical quantum transduction across optomechanical, electro-optic, and magneto-optic platforms, with emphasis on conversion efficiency, bandwidth, added noise, and operating temperature. In addition to standard metrics, we propose the internal efficiency eta_in and the magnon decay rate kappa_m/2pi as normalized parameters that enable fairer comparison across heterogeneous implementations. Optomechanical systems achieve internal phonon-to-photon efficiencies of 93% with sub-quantum added noise of 0.25 quanta at millikelvin temperatures. Electro-optic devices based on LiNbO3 and AlN have advanced from room-temperature efficiencies below 1% to millikelvin systems with internal efficiencies approaching 99.5%, added noise as low as 0.16 quanta at 60 mK, and bandwidths extending to several tens of megahertz. Magneto-optic (optomagnonic) platforms exhibit the lowest efficiencies (typically $10^{-10}$ to $10^{-8})$, but offer intrinsic non-reciprocity and broadband magnonic operation, with emerging approaches based on topological heterostructures and magnon squeezing predicting enhancements up to $10^{-4}$. Optomechanical systems appear promising for high-fidelity quantum state transfer, electro-optic transducers for high-bandwidth coherent links, and magneto-optic devices for non-reciprocal network components. We discuss the fundamental trade-off between efficiency and added noise across all three platforms, and argue that heterogeneous microwave-optical transduction is emerging as a key enabling technology for distributed quantum computing and large-scale quantum networks.

quant-pharXiv:2605.26976•May 27, 2026•0 citations

On-chip Ytterbium based Microwave to Optical Transducer

Rikuto Fukumori, Tian Xie, Andrei Faraon

Quantum transduction between microwave and optical photons is important for connecting remote superconducting quantum systems. We present preliminary microwave- to-optics transduction measurements using on-chip Yb3+:YVO4 with an integrated microwave resonator and optical waveguide.

•Jan 1, 2023•0 citations

Coherent microwave-to-optical transduction with Yb:YSO spins strongly coupled to a 3D resonator

Ujjwal Gautam, Nasser Gohari Kamel, Sourabh Kumar +1 more

Microwave-to-optical quantum transducers are essential for entangling remote superconducting qubits. Among the available transduction platforms, ensembles of Er$^{3+}$ and Yb$^{3+}$ ions doped into solids have emerged as leading candidates. While external magnetic fields are needed to split the Zeeman levels of erbium ions and enable a microwave--qubit interface, superconducting qubits suffer decoherence in such fields. In contrast, ytterbium ions exhibit zero-first-order Zeeman transitions and large hyperfine splittings at zero magnetic field (when doped into inorganic crystals). Owing to its long optical and spin coherence times, Yb:YSO has been widely used as a quantum memory, yet its potential for quantum transduction remains largely unexplored. Investigating this material could enable the integration of quantum memory and transduction in a single platform. Here, we demonstrate microwave-to-optical transduction in the continuous-wave regime using a 5\,ppm doped Yb:YSO crystal. The internal transduction efficiency is $2\times10^{-8}$ with a bandwidth of 200\,kHz, achieved using a 3D loop-gap microwave resonator (LGR) and a single-pass optical configuration. We explore all the ground states that form a V-type three-level system with the first and second optical excited states and assert the use of the ground state, which provides the highest efficiency and isolated optical transition. We further establish strong spin-microwave coupling from avoided crossing measurements. With a strong microwave drive to saturate the spin transition, we estimate the spin population pumped into the excited state, close to the simulated value. Finally, we calculate target parameter values for maximum efficiency with our system and suggest using 50\,ppm doped Yb:YSO crystal. With the calculated target parameters, the internal transduction efficiency is predicted to reach up to $10^{-4}$ in the current LGR.

quant-pharXiv:2609.02226•Sep 3, 2026•0 citations
Optical networks that distribute entanglement among various quantum systems will form a powerful framework for quantum science but are yet to interface with leading quantum hardware such as superconducting qubits. Consequently, these systems remain isolated because microwave links at room temperature are noisy and lossy. Building long distance connectivity requires interfaces that map quantum information between microwave and optical fields. While preliminary microwave-to-optical transducers have been realized, developing efficient, low-noise devices that match superconducting qubit frequencies (gigahertz) and bandwidths (10 kilohertz - 1 megahertz) remains a challenge. Here we demonstrate a proof-of-concept on-chip transducer using trivalent ytterbium-171 ions in yttrium orthovanadate coupled to a nanophotonic waveguide and a microwave transmission line. The device's miniaturization, material, and zero-magnetic-field operation are important advances for rare-earth ion magneto-optical devices. Further integration with high quality factor microwave and optical resonators will enable efficient transduction and create opportunities toward multi-platform quantum networks.
Abstract Optical networks that distribute entanglement among various quantum systems will form a powerful framework for quantum science but are yet to interface with leading quantum hardware such as superconducting qubits. Consequently, these systems remain isolated because microwave links at room temperature are noisy and lossy. Building long distance connectivity requires interfaces that map quantum information between microwave and optical fields. While preliminary microwave-to-optical transducers have been realized, developing efficient, low-noise devices that match superconducting qubit frequencies (gigahertz) and bandwidths (10 kilohertz – 1 megahertz) remains a challenge. Here we demonstrate a proof-of-concept on-chip transducer using trivalent ytterbium-171 ions in yttrium orthovanadate coupled to a nanophotonic waveguide and a microwave transmission line. The device′s miniaturization, material, and zero-magnetic-field operation are important advances for rare-earth ion magneto-optical devices. Further integration with high quality factor microwave and optical resonators will enable efficient transduction and create opportunities toward multi-platform quantum networks.
Abstract Optical quantum networks can connect distant quantum processors to enable secure quantum communication and distributed quantum computing. Superconducting qubits are a leading technology for quantum information processing but cannot couple to long-distance optical networks without an efficient, coherent, and low noise interface between microwave and optical photons. Here, we demonstrate a microwave-to-optical transducer using an ensemble of erbium ions that is simultaneously coupled to a superconducting microwave resonator and a nanophotonic optical resonator. The coherent atomic transitions of the ions mediate the frequency conversion from microwave photons to optical photons and using photon counting we observed device conversion efficiency approaching 10 −7 . With pulsed operation at a low duty cycle, the device maintained a spin temperature below 100 mK and microwave resonator heating of less than 0.15 quanta.
The development of scalable quantum networks requires coherent interfaces capable of converting microwave photons used in superconducting quantum processors into optical photons suitable for long-distance fiber transmission. This review surveys recent progress in microwave-to-optical quantum transduction across optomechanical, electro-optic, and magneto-optic platforms, with emphasis on conversion efficiency, bandwidth, added noise, and operating temperature. In addition to standard metrics, we propose the internal efficiency eta_in and the magnon decay rate kappa_m/2pi as normalized parameters that enable fairer comparison across heterogeneous implementations. Optomechanical systems achieve internal phonon-to-photon efficiencies of 93% with sub-quantum added noise of 0.25 quanta at millikelvin temperatures. Electro-optic devices based on LiNbO3 and AlN have advanced from room-temperature efficiencies below 1% to millikelvin systems with internal efficiencies approaching 99.5%, added noise as low as 0.16 quanta at 60 mK, and bandwidths extending to several tens of megahertz. Magneto-optic (optomagnonic) platforms exhibit the lowest efficiencies (typically 10−1010^{-10}10−10 to 10−8)10^{-8})10−8), but offer intrinsic non-reciprocity and broadband magnonic operation, with emerging approaches based on topological heterostructures and magnon squeezing predicting enhancements up to 10−410^{-4}10−4. Optomechanical systems appear promising for high-fidelity quantum state transfer, electro-optic transducers for high-bandwidth coherent links, and magneto-optic devices for non-reciprocal network components. We discuss the fundamental trade-off between efficiency and added noise across all three platforms, and argue that heterogeneous microwave-optical transduction is emerging as a key enabling technology for distributed quantum computing and large-scale quantum networks.
Microwave-to-optical quantum transducers are essential for entangling remote superconducting qubits. Among the available transduction platforms, ensembles of Er3+^{3+}3+ and Yb3+^{3+}3+ ions doped into solids have emerged as leading candidates. While external magnetic fields are needed to split the Zeeman levels of erbium ions and enable a microwave--qubit interface, superconducting qubits suffer decoherence in such fields. In contrast, ytterbium ions exhibit zero-first-order Zeeman transitions and large hyperfine splittings at zero magnetic field (when doped into inorganic crystals). Owing to its long optical and spin coherence times, Yb:YSO has been widely used as a quantum memory, yet its potential for quantum transduction remains largely unexplored. Investigating this material could enable the integration of quantum memory and transduction in a single platform. Here, we demonstrate microwave-to-optical transduction in the continuous-wave regime using a 5\,ppm doped Yb:YSO crystal. The internal transduction efficiency is 2×10−82\times10^{-8}2×10−8 with a bandwidth of 200\,kHz, achieved using a 3D loop-gap microwave resonator (LGR) and a single-pass optical configuration. We explore all the ground states that form a V-type three-level system with the first and second optical excited states and assert the use of the ground state, which provides the highest efficiency and isolated optical transition. We further establish strong spin-microwave coupling from avoided crossing measurements. With a strong microwave drive to saturate the spin transition, we estimate the spin population pumped into the excited state, close to the simulated value. Finally, we calculate target parameter values for maximum efficiency with our system and suggest using 50\,ppm doped Yb:YSO crystal. With the calculated target parameters, the internal transduction efficiency is predicted to reach up to 10−410^{-4}10−4 in the current LGR.