While single-shot detection of silicon spin qubits is now a laboratory routine, the need for quantum error correction in a large-scale quantum computing device demands a quantum non-demolition (QND) implementation. Unlike conventional counterparts, the QND spin readout imposes minimal disturbance to the probed spin polarization and can therefore be repeated to extinguish measurement errors. Here, we show that an electron spin qubit in silicon can be measured in a highly non-demolition manner by probing another electron spin in a neighboring dot Ising-coupled to the qubit spin. The high non-demolition fidelity (99% on average) enables over 20 readout repetitions of a single spin state, yielding an overall average measurement fidelity of up to 95% within 1.2 ms. We further demonstrate that our repetitive QND readout protocol can realize heralded high-fidelity (>99.6%) ground-state preparation. Our QND-based measurement and preparation, mediated by a second qubit of the same kind, will allow for a wide class of quantum information protocols with electron spins in silicon without compromising the architectural homogeneity.
While single-shot detection of silicon spin qubits is now a laboratory routine, the need for quantum error correction in a large-scale quantum computing device demands a quantum non-demolition (QND) implementation. Unlike conventional counterparts, the QND spin readout imposes minimal disturbance to the probed spin polarization and can therefore be repeated to extinguish measurement errors. Here, we show that an electron spin qubit in silicon can be measured in a highly non-demolition manner by probing another electron spin in a neighboring dot Ising-coupled to the qubit spin. The high non-demolition fidelity (99% on average) enables over 20 readout repetitions of a single spin state, yielding an overall average measurement fidelity of up to 95% within 1.2 ms. We further demonstrate that our repetitive QND readout protocol can realize heralded high-fidelity (>99.6%) ground-state preparation. Our QND-based measurement and preparation, mediated by a second qubit of the same kind, will allow for a wide class of quantum information protocols with electron spins in silicon without compromising the architectural homogeneity.
Abstract Feedback control of qubits is a highly demanded technique for advanced quantum information protocols such as fault-tolerant quantum error correction. Here we demonstrate active reset of a silicon spin qubit using feedback control. The active reset is based on quantum non-demolition (QND) readout of the qubit and feedback according to the readout results, which is enabled by hardware data processing and sequencing. We incorporate a cumulative readout technique to the active reset protocol, enhancing initialization fidelity above a limitation imposed by the single-shot QND readout fidelity. An analysis of the reset protocol implies a pathway to achieve the initialization fidelity sufficient for fault-tolerant quantum computation. These results provide a practical approach to high-fidelity qubit operations in realistic devices.
Quantum error correction is of crucial importance for fault-tolerant quantum computers.As an essential step toward the implementation of quantum error-correcting codes, quantum nondemolition measurements are needed to efficiently detect the state of a logical qubit without destroying it.Here we implement quantum nondemolition measurements in a Si/SiGe two-qubit system, with one qubit serving as the logical qubit and the other serving as the ancilla.Making use of a two-qubit controlled-rotation gate, the state of the logical qubit is mapped onto the ancilla, followed by a destructive readout of the ancilla.Repeating this procedure enhances the logical readout fidelity from 75.5 Æ 0.3% to 94.5 Æ 0.2% after 15 ancilla readouts.In addition, we compare the conventional thresholding method with an improved signal processing method called soft decoding that makes use of analog information in the readout signal to better estimate the state of the logical qubit.We demonstrate that soft decoding leads to a significant reduction in the required number of repetitions when the readout errors become limited by Gaussian noise, for instance, in the case of readouts with a low signal-to-noise ratio.These results pave the way for the implementation of quantum error correction with spin qubits in silicon.
A full-scale quantum computer requires physical qubits that can be controlled with high precision and accuracy. Unfortunately, few state-of-the-art qubits can perform all their elementary operations (preparation, measurement, single-qubit gates and two-qubit gates) with sufficient fidelity. In this thesis, we investigate alternative schemes for such operations in solid-state qubits. Specifically, two-qubit gates and measurements, which are often the noisiest of the four. \n \nWe first provide a preliminary introduction to quantum computing, and describe how quantum information can be encoded and manipulated in quantum systems. We include background information for the three different solid-state qubit architectures that feature in this thesis: spin qubits, superconducting qubits and Majorana qubits. \n \nFollowing this, we investigate a scheme for mediating a two-qubit interaction between spin qubits via a multielectron quantum dot. We study a multielectron dot in detail, and characterise its exchange interaction with a single spin. With the aid of a theoretical model, we show that the multielectron dot possesses an irregular triplet-preferring ground state, analogous to Hund's rule from atomic physics. Using these findings, we then demonstrate that the multielectron dot can be used to mediate a fast, long-range exchange interaction between two spin qubits. \n \nSubsequently, we examine two resonator-based measurement schemes for Majorana qubits. We first propose a readout technique based on a longitudinal qubit-resonator interaction. This leads to a measurement that is fast, high-fidelity and quantum non-demolition (QND). We then investigate a more conventional dispersive readout scheme. Not only does this yield a high quality measurement, but it can also offers a more protected readout mechanism in comparison to the dispersive readout of conventional superconducting qubits.
Quantum systems must be prepared, controlled, and measured with high fidelity in order to perform complex quantum algorithms. Control fidelities have greatly improved in silicon spin qubits but state-preparation and readout fidelities have generally been poor. By operating with low electron temperatures and employing high-bandwidth cryogenic amplifiers, we demonstrate single-qubit readout visibilities $>99\mathrm{%}$, exceeding the threshold for quantum error correction. In the same device, we achieve average single-qubit control fidelities $>99.95\mathrm{%}$. Our results show that silicon spin qubits can be operated with high overall operation fidelity.
Fast, precise, and quantum-non-demolition (QND) readout of superconducting qubits is a fundamental component of high-fidelity quantum sensing and computation. Conventional approaches typically operate in the dispersive regime, where the qubit-resonator coupling g is weak compared to the detuning Δ. While exhibiting good QND properties, the readout rate is limited to ∼g2N/Δ≪g, where N is the number of photons in the resonator. QND readout in the nondispersive regime, where the readout rate reaches its full potential ∼g, relies on parameter sweeps that may encounter resonances, leading to measurement-induced state transitions (MIST). In this work, we study a nondispersive readout protocol that replaces these sweeps by sudden quenches of the coupling constant, using a resonator that is preloaded with photons. We call this protocol bang-bang readout, and show that it realizes single-shot projective measurements. The fidelity and QNDness of the qubit post-measurement are remarkably high, with an error that decreases like 1/N. We show that the protocol can also be implemented without preloading the resonator by instead strongly driving the qubit, e.g., with a classical flux drive.
Spin is a quantum mechanical property that describes the magnetic orientation of elementary and composite particles such as electrons and nuclei. For spin-half particles placed in a magnetic field, two states with differing energies are defined. Proposals exist for developing a revolutionary kind of computer that encodes bits of information on the states of a simple quantum two-level system - like those of a spin in a magnetic field. These quantum computers exploit the fundamental principles of quantum mechanics in order to perform certain calculations exponentially faster than their classical counterparts. Key to the development of such a device is the identification of potential systems that are suitable for employment as a quantum bit (qubit). This thesis explores quantum bits constructed from the spin states of single atoms hosted in silicon semiconductor devices. Silicon is an exceptional platform for spin-based quantum computing - in addition to being the dominant material in the microelectronic industry, it is also predominantly composed of nuclear spin-zero isotopes, providing very little background magnetic disturbance. The donor-atom phosphorus (31P) is investigated here. It possesses a nucleus that binds an additional electron to its positive charge, providing two distinct spin qubits. Here, several world-first experimental milestones in spin-based quantum information processing are reported. First, the readout of the electron spin is demonstrated in single-shot, using a silicon device which combines implanted phosphorus donors with a sensitive nanoscale electrometer. Then, the electron spin is coherently operated as a qubit by delivering on-chip microwave excitations. Combining the electron spin detection and control capabilities enables a quantum non-demolition measurement of the single 31P nuclear spin. Experiments yield exceptional nuclear readout fidelities - the highest for any solid-state qubit. Through an application of nuclear magnetic resonance, high-fidelity quantum control of the nuclear spin qubit is demonstrated. Finally, a single spin-bearing silicon nucleus (29Si) coupled to the electron spin is detected in single-shot and operated as a qubit. These results, along with the clear pathways identified for improving device performance, illustrate that single-atom electron and nuclear spin qubits in silicon constitute an excellent basis on which to construct a quantum computer.