Spontaneous wavefunction collapse theories provide the possibility to resolve the measurement problem of quantum mechanics. However, the best experimental tests have been limited by thermal fluctuations and have operated at frequencies far below those conjectured to allow the proposed cosmological origin of collapse to be identified. Here we propose to use high-frequency nanomechanical resonators to surpass these limitations. We consider a specific implementation that uses a breathing mode of a quantum optomechanical system cooled to near its motional ground state. The scheme combines phonon counting with efficient mitigation of technical noise, including nonlinear photon conversion and photon coincidence counting. It can resolve the exquisitely small phonon fluxes required for a conclusive test of collapse models as well as testing the hypothesis of a cosmological origin of the collapse noise.
Spontaneous wavefunction collapse theories provide the possibility to resolve the measurement problem of quantum mechanics. However, the best experimental tests have been limited by thermal fluctuations and have operated at frequencies far below those conjectured to allow the proposed cosmological origin of collapse to be identified. Here we propose to use high-frequency nanomechanical resonators to surpass these limitations. We consider a specific implementation that uses a breathing mode of a quantum optomechanical system cooled to near its motional ground state. The scheme combines phonon counting with efficient mitigation of technical noise, including nonlinear photon conversion and photon coincidence counting. It can resolve the exquisitely small phonon fluxes required for a conclusive test of collapse models as well as testing the hypothesis of a cosmological origin of the collapse noise.
Spontaneous wavefunction collapse theories provide the possibility to resolve the measurement problem of quantum mechanics. However, the best experimental tests to date have been limited by thermal fluctuations and have operated at frequencies far below those conjectured to allow the physical origins of collapse to be identified. Here we propose a new approach which can surpass these limitations. Our approach uses a nanoscale optomechanical system cooled to near its motional ground state. The scheme combines phonon counting with efficient mitigation of technical noise, including non-linear photon conversion and photon coincidence counting. It is capable of resolving the exquisitely small phonon fluxes required for a conclusive test of collapse models as well as potentially identifying their physical origin.
Abstract Theories of spontaneous wavefunction collapse offer an explanation of the possible breakdown of quantum mechanics for macroscopic systems. However, the challenge of resolving predicted collapse signatures above background noise has precluded conclusive tests. Here, we propose to overcome this challenge using quantum control and measurement of a superconducting qubit coupled to a macroscopic mechanical resonator. We show that this can amplify the weak signals from collapse-induced heating and simultaneously suppress qubit noise, initializing the qubit close to its ground state. Combined, this could enable a conclusive test of collapse models. The ability to quantum control macroscopic mechanical resonators and resolve extremely small signals from them could further other fundamental research beyond collapse models, such as laboratory-based dark matter searches and the reconciliation of quantum mechanics with gravity.
Why are classical theories often sufficient to describe the physics of our world even though everything around us is entirely composed of microscopic quantum systems? The boundary between these two fundamentally dissimilar theories remains an unsolved problem in modern physics. Position measurements of small objects allow us to probe the area where the classical approximation breaks down. In quantum mechanics, Heisenbergâ s uncertainty principle dictates that any measurement of the position must be accompanied by measurement induced back-action---in this case manifested as an uncertainty in the momentum. In recent years, cavity optomechanics has become a powerful tool to perform precise position measurements and investigate their fundamental limitations. The utilization of optical micro-cavities greatly enhances the interaction between light and state-of-the-art nanomechanical oscillators. Therefore, quantum mechanical phenomena have been successfully observed in systems far beyond the microscopic world. In such a cavity optomechanical system, the fluctuations in the position of the oscillator are transduced onto the phase of the light, while fluctuations in the amplitude of the light disturb the momentum of the oscillator during the measurement. As a consequence, correlations are established between the amplitude and phase quadrature of the probe light. However, so far, observation of quantum effects has been limited exclusively to cryogenic experiments, and access to the quantum regime at room temperature has remained an elusive goal because the overwhelming amount of thermal motion masks the weak quantum effects. This thesis describes the engineering of a high-performance cavity optomechanical device and presents experimental results showing, for the first time, the broadband effects of quantum back-action at room temperature. The device strongly couples mechanical and optical modes of exceptionally high quality factors to provide a measurement sensitivity ∼104 times below the requirement to resolve the zero-point fluctuations of the mechanical oscillator. The quantum back-action is then observed through the correlations created between the probe light and the motion of the nanomechanical oscillator. A so-called â variational measurementâ , which detects the transmitted light in a homodyne detector tuned close to the amplitude quadrature, resolves the quantum noise due to these correlations at the level of 10\% of the thermal noise over more than an octave of Fourier frequencies around mechanical resonance. Moreover, building on this result, an additional experiment demonstrates the ability to achieve quantum enhanced metrology. In this case, the generated quantum correlations are used to cancel quantum noise in the measurement record, which then leads to an improved relative signal-to-noise ratio in measurements of an external force. In conclusion, the successful observation of broadband quantum behavior on a macroscopic object at room temperature is an important milestone in the field of cavity optomechanics. Specifically, this result heralds the rise of optomechanical systems as a platform for quantum physics at room temperature and shows promise for generation of ponderomotive squeezing in room-temperature interferometers.
In the field of cavity optomechanics, proposals for quantum nondemolition (QND) measurements of phonon number provide a promising avenue by which one can study the quantum nature of nanoscale mechanical resonators. Here we investigate these QND measurements for an optomechanical system whereby quadratic coupling arises due to shared symmetries between a single optical resonance and a mechanical mode. We establish a relaxed limit on the amount of linear coupling that can exist in this type of system while still allowing for QND measurements of mechanical Fock states. The ability to perform optomechanical QND measurements of this nature would allow one to probe the decoherence of these mesoscopic states, providing an experimental test bed for quantum collapse theories.
The application of quantum mechanics to macroscopic motion suggests many counterintuitive phenomena. While the quantum nature of the motion of individual atoms and molecules has long been successfully studied, an equivalent demonstration of the motion of a near-macroscopic structure remains a challenge in experimental physics. A nanomechanical resonator is an excellent system for such a study. It typically contains > 10 10 atoms, and it may be modeled in terms of macroscopic parameters such as bulk density and elasticity. Yet it behaves like a simple harmonic oscillator, with mass low enough and resonant frequency high enough for its quantum zero-point motion and single energy quanta to be experimentally accessible. In pursuit of quantum phenomena in a mechanical oscillator, two important goals are to prepare the oscillator in its quantum ground state, and to measure its position with a precision limited by the Heisenberg uncertainty principle. In this work we have demonstrated techniques that advance towards both of these goals. Our system comprises a 30 micron × 170 nm, 2.2 pg, 5.57 MHz nanomechanical resonator capacitively coupled to a 5 GHz superconducting microwave resonator. The microwave resonator and nanomechanical resonator are fabricated together onto a single silicon chip and measured in a dilution refrigerator at temperatures below 150 mK. At these temperatures the coupling of the motion to the thermal environment is very small, resulting in a very high mechanical Q, approaching ∼ 10 6 . By driving with a microwave pump signal, we observed sidebands generated by the mechanical motion and used these to measure the thermal motion of the resonator. Applying a pump tone red-detuned from the microwave resonance, we used the microwave field to damp the mechanical resonator, extracting energy and "cooling" the motion in a manner similar to optical cooling of trapped atoms. Starting from a mode temperature of ∼ 150 mK, we reached ∼ 40 mK by this "backaction cooling" technique, corresponding to an occupation factor only ∼ 150 times above the ground state of motion. We also determined the precision of our device in measurement of position. Quantum mechanics dictates that, in a continuous position measurement, the precision may be no better than the zero-point motion of the resonator. Increasing the coupling of the resonator to detector will eventually result in back-action driving of the motion, adding imprecision and enforcing this limit. We demonstrated that our system is capable of precisions approaching this limit, and identified the primary experimental factors preventing us from reaching it: noise added to the measurement by our amplifier, and excess dissipation appearing in our microwave resonator at high pump powers. Furthermore, by applying both red- and blue-detuned phase-coherent microwave pump signals, we demonstrated back-action evading (BAE) measurement sensitive to only a single quadrature of the motion. By avoiding the back-action driving in the measured quadrature, such a technique has the potential for precisions surpassing the limit of the zero-point motion. With this method, we achieved a measurement precision of ∼ 100 fm, or 4 times the quantum zero-point motion of the mechanical resonator. We found that the measured quadrature is insensitive to back-action driving by at least a factor of 82 relative to the unmeasured quadrature. We also identified a mechanical parametric amplification effect which arises during the BAE measurement. This effect sets limits on the BAE performance but also mechanically preamplifies the motion, resulting in a position resolution 1.3 times the zero-point motion. We discuss how to overcome the experimental limits set by amplifier noise, pump power and parametric amplification. These results serve to define the path forward for demonstrating truly quantum-limited measurement and non-classical states of motion in a nearly-macroscopic object.
Quantum experiments with nanomechanical oscillators are regarded as a test bed for hypothetical modifications of the Schrödinger equation, which predict a breakdown of the superposition principle and induce classical behavior at the macroscale. It is generally believed that the sensitivity to these unconventional effects grows with the mass of the mechanical quantum system. Here we show that the opposite is the case for optomechanical systems in the presence of generic noise sources, such as thermal and measurement noise. We determine conditions for distinguishing these decoherence processes from possible collapse-induced decoherence in continuous optomechanical force measurements.