Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1908.07637 · Physical Review A

Universal gates for protected superconducting qubits using optimal control

Mohamed R. Abdelhafez, Brian Baker, András Gyenis, Pranav Mundada, Andrew Houck, David Schuster, Jens Koch

Published Feb 18, 2020• 51 citations
arXivHTMLPDF

Abstract

We employ quantum optimal control theory to realize quantum gates for two protected superconducting circuits: the heavy-fluxonium qubit and the 0-$\ensuremath{\pi}$ qubit. Utilizing automatic differentiation facilitates the simultaneous inclusion of multiple optimization targets, allowing one to obtain high-fidelity gates with realistic pulse shapes. For both qubits, disjoint support of low-lying wave functions prevents direct population transfer between the computational-basis states. Instead, optimal control favors dynamics involving higher-lying levels, effectively lifting the protection for a fraction of the gate duration. For the 0-$\ensuremath{\pi}$ qubit, offset-charge dependence of matrix elements among higher levels poses an additional challenge for gate protocols. To mitigate this issue, we randomize the offset charge during the optimization process, steering the system towards pulse shapes insensitive to charge variations. Closed-system fidelities obtained are 99% or higher and show slight reductions in open-system simulations.

DOI
10.1103/physreva.101.022321

Related papers

Leakage reduction in fast superconducting qubit gates via optimal control

M. Werninghaus, D. J. Egger, F. Roy +3 more

Abstract Reaching high-speed, high-fidelity qubit operations requires precise control over the shape of the underlying pulses. For weakly anharmonic systems, such as superconducting transmon qubits, short gates lead to leakage to states outside of the computational subspace. Control pulses designed with open-loop optimal control may reduce such leakage. However, model inaccuracies can severely limit the usability of such pulses. We implemented a closed-loop optimization that simultaneously adapts all control parameters based on measurements of a cost function built from Clifford gates. We directly optimize the amplitude and phase of each sample point of the digitized control pulse. We thereby fully exploit the capabilities of the pulse generation electronics and create a 4.16 ns single-qubit pulse with 99.76 % fidelity and 0.044 % leakage. This is a sevenfold reduction of the leakage rate and a threefold reduction in standard errors of the best DRAG pulse we have calibrated at such short durations on the same system.

arXiv:2003.05952•npj Quantum Information•Jan 29, 2021•192 citations

Closed-loop optimization for high-fidelity controlled- Z gates in superconducting qubits

N.J. Glaser, Federico Roy, Ivan Tsitsilin +13 more

Achieving fast and high-fidelity qubit operations is crucial for unlocking the potential of quantum computers. In particular, reaching low gate errors in two-qubit gates has been a long-standing challenge in the field of superconducting qubits due to their typically long duration relative to coherence times. To realize fast gates, we use the hybridization between fixed-frequency superconducting qubits with a strongly interacting coupler mode that is tunable in frequency. To reduce population leakage during required adiabatic passages through avoided level crossings, we employ a sensitivity-adaptive closed-loop optimization method to design complex pulse shapes. We compare the performance of Gaussian-square, Fourier-series, and piecewise-constant-slope pulse parametrizations and are able to reach 99.9% controlled- Z -gate fidelity using a 64-ns-long Fourier-series pulse defined by only seven parameters. These high-fidelity values are achieved by analyzing the optimized pulse shapes to identify and systematically mitigate signal-line distortions in the experiment. To improve the convergence speed of the optimization, we implement an adaptive cost function, which continuously maximizes the sensitivity. The demonstrated method can be used for tune-up and recalibration of superconducting quantum processors.

arXiv:2412.17454•Physical Review Applied•Jul 15, 2025•5 citations

Fast gates for bit-flip protected superconducting qubits

Christian Siegele, A. A. Sokolova, Lucky N. Kapoor +2 more

Superconducting qubits offer an unprecedentedly high degree of flexibility in terms of circuit encoding and parameter choices. However, in designing the qubit parameters one typically faces the conflicting goals of long coherence times and simple control capabilities. Both are determined by the wavefunction overlap of the qubit basis states and the corresponding matrix elements. Here, we address this problem by introducing a qubit architecture with real-time tunable bit-flip protection. In the first, the `heavy' regime, the energy relaxation time can be on the order of hours for fluxons located in two near-degenerate ground states, as recently demonstrated in Ref. [Hassani et al., Nat.~Commun.~14 (2023)]. The second, `light' regime, on the other hand facilitates high-fidelity control on nanosecond timescales without the need for microwave signals. We propose two different tuning mechanisms of the qubit potential and show that base-band flux-pulses of around 10 ns are sufficient to realize a universal set of high-fidelity single- and two-qubit gates. We expect that the concept of real-time wavefunction control can also be applied to other hardware-protected qubit designs.

arXiv:2504.04807•Apr 7, 2025•0 citations

Universal Fast-Flux Control of a Coherent, Low-Frequency Qubit

Helin Zhang, Srivatsan Chakram, Tanay Roy +6 more

The heavy-fluxonium circuit is a promising building block for superconducting quantum processors due to its long relaxation and dephasing time at the flux-frustration point. However, the suppressed charge matrix elements and low transition frequency make it challenging to perform fast single-qubit gates using standard protocols. We report on new protocols for reset, fast coherent control,and readout that allow high-quality operation of the qubit with a 14 MHz transition frequency, an order of magnitude lower in energy than the ambient thermal energy scale. We utilize higher levels of the fluxonium to read out the qubit state and to initialize the qubit with 97% fidelity corresponding to cooling it to 190 μK. Instead of using standard microwave pulses, we control the qubit only with fast-flux pulses, generating control fields much larger than the qubit frequency. We develop a universal set of gates based on nonadiabatic Landau-Zener transitions that act in 20-60 ns, less than the single-qubit Larmor period. We measure qubit coherence of T1,T2e∼300 μs for a fluxonium in a 2D architecture and realize single-qubit gates with an average gate fidelity of 99.8% as characterized by randomized benchmarking.

•Jan 15, 2021•104 citations

Fast Gates for Bit-Flip Protected Superconducting Qubits

C. A. Siegele, А. Соколова, Lucky N. Kapoor +2 more

Superconducting qubits offer an unprecedentedly high degree of flexibility in terms of circuit encoding and parameter choices. However, in designing the qubit parameters, one typically faces the conflicting goals of long coherence times and simple control capabilities. Both are determined by the wavefunction overlap of the qubit basis states and the corresponding matrix elements. Here, we address this problem by introducing a qubit architecture with real-time tunable bit-flip protection. In the first, the “heavy” regime, the energy relaxation time can be on the order of hours for fluxons located in two near-degenerate ground states, as recently demonstrated in Ref. [Hassani ., (2023)]. The second, “light” regime, facilitates high-fidelity control on nanosecond timescales without the need for microwave signals. We propose two different tuning mechanisms of the qubit potential and show that base-band flux-pulses of around 10 ns are sufficient to realize a universal set of high-fidelity single- and two-qubit gates. This realizes a hardware-efficient and strongly noise-biased qubit platform with analogies to cat qubits with the potential for efficient quantum error correction. We expect that the introduced concept of fast and real-time wavefunction control can also be applied to other hardware-protected qubit designs.

PRX Quantum•Jul 31, 2026•0 citations

Robust, fast, and high-fidelity composite single-qubit gates for superconducting transmon qubits

Hristo G. Tonchev, Boyan T. Torosov, Nikolay V. Vitanov

We introduce a novel quantum control method for superconducting transmon qubits that substantially outperforms conventional techniques in precision and robustness against coherent errors. Our approach leverages composite pulses (CP) to effectively mitigate system-specific errors, such as qubit frequency and anharmonicity variations. By utilizing CP, we demonstrate both complete and partial population transfers between qubit states, as well as the implementation of two essential single-qubit quantum gates. Simulations reveal substantial reductions in common error rates and gate durations. The effectiveness of our method is validated through four independent verification techniques, underscoring its potential for advancing quantum computing with superconducting qubits.

arXiv:2205.04155•Physical Review A•Jun 16, 2025•5 citations
We employ quantum optimal control theory to realize quantum gates for two protected superconducting circuits: the heavy-fluxonium qubit and the 0-\ensuremathπ\ensuremath{\pi}\ensuremathπ qubit. Utilizing automatic differentiation facilitates the simultaneous inclusion of multiple optimization targets, allowing one to obtain high-fidelity gates with realistic pulse shapes. For both qubits, disjoint support of low-lying wave functions prevents direct population transfer between the computational-basis states. Instead, optimal control favors dynamics involving higher-lying levels, effectively lifting the protection for a fraction of the gate duration. For the 0-\ensuremathπ\ensuremath{\pi}\ensuremathπ qubit, offset-charge dependence of matrix elements among higher levels poses an additional challenge for gate protocols. To mitigate this issue, we randomize the offset charge during the optimization process, steering the system towards pulse shapes insensitive to charge variations. Closed-system fidelities obtained are 99% or higher and show slight reductions in open-system simulations.
Abstract Reaching high-speed, high-fidelity qubit operations requires precise control over the shape of the underlying pulses. For weakly anharmonic systems, such as superconducting transmon qubits, short gates lead to leakage to states outside of the computational subspace. Control pulses designed with open-loop optimal control may reduce such leakage. However, model inaccuracies can severely limit the usability of such pulses. We implemented a closed-loop optimization that simultaneously adapts all control parameters based on measurements of a cost function built from Clifford gates. We directly optimize the amplitude and phase of each sample point of the digitized control pulse. We thereby fully exploit the capabilities of the pulse generation electronics and create a 4.16 ns single-qubit pulse with 99.76 % fidelity and 0.044 % leakage. This is a sevenfold reduction of the leakage rate and a threefold reduction in standard errors of the best DRAG pulse we have calibrated at such short durations on the same system.
Achieving fast and high-fidelity qubit operations is crucial for unlocking the potential of quantum computers. In particular, reaching low gate errors in two-qubit gates has been a long-standing challenge in the field of superconducting qubits due to their typically long duration relative to coherence times. To realize fast gates, we use the hybridization between fixed-frequency superconducting qubits with a strongly interacting coupler mode that is tunable in frequency. To reduce population leakage during required adiabatic passages through avoided level crossings, we employ a sensitivity-adaptive closed-loop optimization method to design complex pulse shapes. We compare the performance of Gaussian-square, Fourier-series, and piecewise-constant-slope pulse parametrizations and are able to reach 99.9% controlled- Z -gate fidelity using a 64-ns-long Fourier-series pulse defined by only seven parameters. These high-fidelity values are achieved by analyzing the optimized pulse shapes to identify and systematically mitigate signal-line distortions in the experiment. To improve the convergence speed of the optimization, we implement an adaptive cost function, which continuously maximizes the sensitivity. The demonstrated method can be used for tune-up and recalibration of superconducting quantum processors.
Superconducting qubits offer an unprecedentedly high degree of flexibility in terms of circuit encoding and parameter choices. However, in designing the qubit parameters one typically faces the conflicting goals of long coherence times and simple control capabilities. Both are determined by the wavefunction overlap of the qubit basis states and the corresponding matrix elements. Here, we address this problem by introducing a qubit architecture with real-time tunable bit-flip protection. In the first, the `heavy' regime, the energy relaxation time can be on the order of hours for fluxons located in two near-degenerate ground states, as recently demonstrated in Ref. [Hassani et al., Nat.~Commun.~14 (2023)]. The second, `light' regime, on the other hand facilitates high-fidelity control on nanosecond timescales without the need for microwave signals. We propose two different tuning mechanisms of the qubit potential and show that base-band flux-pulses of around 10 ns are sufficient to realize a universal set of high-fidelity single- and two-qubit gates. We expect that the concept of real-time wavefunction control can also be applied to other hardware-protected qubit designs.
The heavy-fluxonium circuit is a promising building block for superconducting quantum processors due to its long relaxation and dephasing time at the flux-frustration point. However, the suppressed charge matrix elements and low transition frequency make it challenging to perform fast single-qubit gates using standard protocols. We report on new protocols for reset, fast coherent control,and readout that allow high-quality operation of the qubit with a 14 MHz transition frequency, an order of magnitude lower in energy than the ambient thermal energy scale. We utilize higher levels of the fluxonium to read out the qubit state and to initialize the qubit with 97% fidelity corresponding to cooling it to 190 μK. Instead of using standard microwave pulses, we control the qubit only with fast-flux pulses, generating control fields much larger than the qubit frequency. We develop a universal set of gates based on nonadiabatic Landau-Zener transitions that act in 20-60 ns, less than the single-qubit Larmor period. We measure qubit coherence of T1,T2e∼300 μs for a fluxonium in a 2D architecture and realize single-qubit gates with an average gate fidelity of 99.8% as characterized by randomized benchmarking.
Superconducting qubits offer an unprecedentedly high degree of flexibility in terms of circuit encoding and parameter choices. However, in designing the qubit parameters, one typically faces the conflicting goals of long coherence times and simple control capabilities. Both are determined by the wavefunction overlap of the qubit basis states and the corresponding matrix elements. Here, we address this problem by introducing a qubit architecture with real-time tunable bit-flip protection. In the first, the “heavy” regime, the energy relaxation time can be on the order of hours for fluxons located in two near-degenerate ground states, as recently demonstrated in Ref. [Hassani ., (2023)]. The second, “light” regime, facilitates high-fidelity control on nanosecond timescales without the need for microwave signals. We propose two different tuning mechanisms of the qubit potential and show that base-band flux-pulses of around 10 ns are sufficient to realize a universal set of high-fidelity single- and two-qubit gates. This realizes a hardware-efficient and strongly noise-biased qubit platform with analogies to cat qubits with the potential for efficient quantum error correction. We expect that the introduced concept of fast and real-time wavefunction control can also be applied to other hardware-protected qubit designs.
We introduce a novel quantum control method for superconducting transmon qubits that substantially outperforms conventional techniques in precision and robustness against coherent errors. Our approach leverages composite pulses (CP) to effectively mitigate system-specific errors, such as qubit frequency and anharmonicity variations. By utilizing CP, we demonstrate both complete and partial population transfers between qubit states, as well as the implementation of two essential single-qubit quantum gates. Simulations reveal substantial reductions in common error rates and gate durations. The effectiveness of our method is validated through four independent verification techniques, underscoring its potential for advancing quantum computing with superconducting qubits.