Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1906.02073 · Journal of Applied Physics

Intrinsically-limited timing jitter in molybdenum silicide superconducting nanowire single-photon detectors

Misael Caloz, Boris A. Korzh, Edward Ramirez, Christian Schönenberger, Richard John Warburton, Hugo Zbinden, Matthew D. Shaw, Félix Bussières

Published Oct 22, 2019• 26 citations
arXivHTMLPDF

Abstract

Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) has delivered excellent performance and has had a great impact on a range of research fields. The timing jitter, which denotes the temporal resolution of the detection, is a crucial parameter for many applications. Despite extensive work since their apparition, the lowest jitter achievable with SNSPDs is still not clear, and the origin of the intrinsic limits is not fully understood. Understanding its intrinsic behavior and limits is a mandatory step toward improvements. Here, we report our experimental study on the intrinsically-limited timing jitter in molybdenum silicide SNSPDs. We show that to reach intrinsic jitter, crucial properties such as the latching current and the kinetic inductance of the devices have to be understood. The dependence on the nanowire thickness and the energy dependence of the intrinsic jitter are quantified, and the origin of the limits is exhibited. System timing jitter of 6.0 ps at 532 nm and 10.6 ps at 1550 nm photon wavelength has been obtained.

DOI
10.1063/1.5113748

Related papers

Intrinsically-limited timing jitter in molybdenum silicide superconducting nanowire single-photon detectors

Misael Caloz, Boris A. Korzh, Edward Ramirez +5 more

Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) has delivered excellent performance and has had a great impact on a range of research fields. The timing jitter, which denotes the temporal resolution of the detection, is a crucial parameter for many applications. Despite extensive work since their apparition, the lowest jitter achievable with SNSPDs is still not clear, and the origin of the intrinsic limits is not fully understood. Understanding its intrinsic behavior and limits is a mandatory step toward improvements. Here, we report our experimental study on the intrinsically-limited timing jitter in molybdenum silicide SNSPDs. We show that to reach intrinsic jitter, crucial properties such as the latching current and the kinetic inductance of the devices have to be understood. The dependence on the nanowire thickness and the energy dependence of the intrinsic jitter are quantified, and the origin of the limits is exhibited. System timing jitter of 6.0 ps at 532 nm and 10.6 ps at 1550 nm photon wavelength has been obtained.

•Jan 1, 2019•21 citations

High-detection efficiency and low-timing jitter with amorphous superconducting nanowire single-photon detectors

Misael Caloz, Matthieu Perrenoud, Claire Autebert +6 more

Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) made of amorphous materials has delivered excellent performances and has had a great impact on a range of research fields. Despite showing the highest system detection efficiency (SDE) ever reported with SNSPDs, amorphous materials typically lead to lower critical currents, which have impacts on their jitter performance. Combining a very low jitter and a high SDE remains a challenge. Here, we report on highly efficient superconducting nanowire single-photon detectors based on amorphous MoSi, combining system jitters as low as 26 ps and a SDE of 80% at 1550 nm. We also report detailed observations on the jitter behaviour, which hints at intrinsic limitations and leads to practical implications for SNSPD performance.

arXiv:1710.06740•Applied Physics Letters•Feb 5, 2018•104 citations

High-detection efficiency and low-timing jitter with amorphous superconducting nanowire single-photon detectors

Misael Caloz, Matthieu Perrenoud, Claire Autebert +6 more

Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) made of amorphous material has delivered excellent performances, and has had a great impact on a range of research fields. Despite showing the highest system detection efficiency (SDE) ever reported with SNSPDs, amorphous materials typically lead to lower critical currents, which impacts on their jitter performance. Combining a very low jitter and a high SDE remains a challenge. Here, we report on highly efficient superconducting nanowire single-photon detectors based on amorphous MoSi, combining system jitters as low as 26 ps and a SDE of 80% at 1550 nm. We also report detailed observations on the jitter behaviour, which hints at intrinsic limitations and leads to practical implications for SNSPD performance.

•Jan 1, 2018•95 citations

Kinetic inductance and jitter dependence of intrinsic photon-number resolution in superconducting nanowire single-photon detectors

Roland Jaha, Connor A. Graham-Scott, Adrian S. Abazi +3 more

Photon-number resolution (PNR) is crucial in quantum information technology. Time-resolved measurements applied to superconducting nanowire single-photon detectors (SNSPDs) have recently demonstrated intrinsic PNR capabilities, complementing their superior efficiency, speed, and timing precision. Using waveguide-integrated SNSPDs, we investigate the impact of nanowire kinetic inductance and system jitter on intrinsic PNR, identifying the trade-off between intrinsic PNR and detector speed. Increasing the kinetic inductance from 165 nH to 872 nH enhances the PNR quality by 12%, 31%, and 23% for the first three photon numbers but reduces the maximum count rate from 165 Mcps to 19 Mcps.

Optics Express•Aug 5, 2025•3 citations

50 µm diameter superconducting nanowire single-photon detector with sub-17 ps timing jitter and high efficiency for visible wavelengths (Conference Presentation)

Jin Chang, Iman Esmaeil Zadeh

Superconducting nanowire single photon detectors (SNSPDs) have demonstrated advantages over traditional detectors in many fields [1]. Most fiber-coupled SNSPDs are coupled to single mode fibers, limiting their usability for applications where large surface area detectors are needed, for example fluorescence detection and satellite-based quantum communication [2][3]. Other important requirements for many applications are broadband detection efficiency, and low timing jitter [4]. So far, the increased meander length of multimode detectors, and the therefore increased kinetic inductance and number of imperfections due to film inhomogeneities have limited the timing jitter [5]. Moreover, combining low timing jitter with high detection efficiency and low dark count rate in one device is challenging due to the tradeoffs between different properties of SNSPDs [6]. In this paper, we achieved high efficiency and strong saturation over a broad wavelength range with a low timing jitter of 16.99 ps while maintaining a low dark count rate of < 0.2 Hz for an SNSPD coupled to a 50 µm core multimode fiber. To enhance the broadband absorption from 405 nm to 830 nm, detectors were fabricated on an optimized SiO2 cavity and Aluminum mirror. The geometry of the nanowire was also tuned to reach a good internal saturation of efficiency over the visible/NIR range but also to carry high current to get a large signal. Furthermore, a cryogenic readout amplifier was optimized to improve the signal to noise ratio and thus lead to high time resolution. Our devices can be readily used to enable higher resolution and faster quantum optics, bio-imaging, laser ranging and other optical experiments.

Quantum Optics and Photon Counting•May 13, 2019•0 citations

Improving the timing jitter of a superconducting nanowire single-photon detection system

Junjie Wu, Lixing You, Sijing Chen +5 more

Low timing jitter is a unique merit of superconducting nanowire single-photon detectors (SNSPDs) for time-correlated applications. Quantitative analysis was performed for the SNSPD system. Aided by an oscilloscope with an optimal signal amplitude, we were able to measure a full width at half-maximum system timing jitter as low as 14.2 ps for a high-switching-current SNSPD using a room-temperature low-noise amplifier. When using a time-correlated single-photon counting module, the system timing jitter was 17.3 ps. The detector's intrinsic timing jitter was estimated at ∼12.0 ps.

Applied Optics•Mar 6, 2017•96 citations
Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) has delivered excellent performance and has had a great impact on a range of research fields. The timing jitter, which denotes the temporal resolution of the detection, is a crucial parameter for many applications. Despite extensive work since their apparition, the lowest jitter achievable with SNSPDs is still not clear, and the origin of the intrinsic limits is not fully understood. Understanding its intrinsic behavior and limits is a mandatory step toward improvements. Here, we report our experimental study on the intrinsically-limited timing jitter in molybdenum silicide SNSPDs. We show that to reach intrinsic jitter, crucial properties such as the latching current and the kinetic inductance of the devices have to be understood. The dependence on the nanowire thickness and the energy dependence of the intrinsic jitter are quantified, and the origin of the limits is exhibited. System timing jitter of 6.0 ps at 532 nm and 10.6 ps at 1550 nm photon wavelength has been obtained.
Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) has delivered excellent performance and has had a great impact on a range of research fields. The timing jitter, which denotes the temporal resolution of the detection, is a crucial parameter for many applications. Despite extensive work since their apparition, the lowest jitter achievable with SNSPDs is still not clear, and the origin of the intrinsic limits is not fully understood. Understanding its intrinsic behavior and limits is a mandatory step toward improvements. Here, we report our experimental study on the intrinsically-limited timing jitter in molybdenum silicide SNSPDs. We show that to reach intrinsic jitter, crucial properties such as the latching current and the kinetic inductance of the devices have to be understood. The dependence on the nanowire thickness and the energy dependence of the intrinsic jitter are quantified, and the origin of the limits is exhibited. System timing jitter of 6.0 ps at 532 nm and 10.6 ps at 1550 nm photon wavelength has been obtained.
Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) made of amorphous materials has delivered excellent performances and has had a great impact on a range of research fields. Despite showing the highest system detection efficiency (SDE) ever reported with SNSPDs, amorphous materials typically lead to lower critical currents, which have impacts on their jitter performance. Combining a very low jitter and a high SDE remains a challenge. Here, we report on highly efficient superconducting nanowire single-photon detectors based on amorphous MoSi, combining system jitters as low as 26 ps and a SDE of 80% at 1550 nm. We also report detailed observations on the jitter behaviour, which hints at intrinsic limitations and leads to practical implications for SNSPD performance.
Recent progress in the development of superconducting nanowire single-photon detectors (SNSPDs) made of amorphous material has delivered excellent performances, and has had a great impact on a range of research fields. Despite showing the highest system detection efficiency (SDE) ever reported with SNSPDs, amorphous materials typically lead to lower critical currents, which impacts on their jitter performance. Combining a very low jitter and a high SDE remains a challenge. Here, we report on highly efficient superconducting nanowire single-photon detectors based on amorphous MoSi, combining system jitters as low as 26 ps and a SDE of 80% at 1550 nm. We also report detailed observations on the jitter behaviour, which hints at intrinsic limitations and leads to practical implications for SNSPD performance.
Photon-number resolution (PNR) is crucial in quantum information technology. Time-resolved measurements applied to superconducting nanowire single-photon detectors (SNSPDs) have recently demonstrated intrinsic PNR capabilities, complementing their superior efficiency, speed, and timing precision. Using waveguide-integrated SNSPDs, we investigate the impact of nanowire kinetic inductance and system jitter on intrinsic PNR, identifying the trade-off between intrinsic PNR and detector speed. Increasing the kinetic inductance from 165 nH to 872 nH enhances the PNR quality by 12%, 31%, and 23% for the first three photon numbers but reduces the maximum count rate from 165 Mcps to 19 Mcps.
Superconducting nanowire single photon detectors (SNSPDs) have demonstrated advantages over traditional detectors in many fields [1]. Most fiber-coupled SNSPDs are coupled to single mode fibers, limiting their usability for applications where large surface area detectors are needed, for example fluorescence detection and satellite-based quantum communication [2][3]. Other important requirements for many applications are broadband detection efficiency, and low timing jitter [4]. So far, the increased meander length of multimode detectors, and the therefore increased kinetic inductance and number of imperfections due to film inhomogeneities have limited the timing jitter [5]. Moreover, combining low timing jitter with high detection efficiency and low dark count rate in one device is challenging due to the tradeoffs between different properties of SNSPDs [6]. In this paper, we achieved high efficiency and strong saturation over a broad wavelength range with a low timing jitter of 16.99 ps while maintaining a low dark count rate of < 0.2 Hz for an SNSPD coupled to a 50 µm core multimode fiber. To enhance the broadband absorption from 405 nm to 830 nm, detectors were fabricated on an optimized SiO2 cavity and Aluminum mirror. The geometry of the nanowire was also tuned to reach a good internal saturation of efficiency over the visible/NIR range but also to carry high current to get a large signal. Furthermore, a cryogenic readout amplifier was optimized to improve the signal to noise ratio and thus lead to high time resolution. Our devices can be readily used to enable higher resolution and faster quantum optics, bio-imaging, laser ranging and other optical experiments.
Low timing jitter is a unique merit of superconducting nanowire single-photon detectors (SNSPDs) for time-correlated applications. Quantitative analysis was performed for the SNSPD system. Aided by an oscilloscope with an optimal signal amplitude, we were able to measure a full width at half-maximum system timing jitter as low as 14.2 ps for a high-switching-current SNSPD using a room-temperature low-noise amplifier. When using a time-correlated single-photon counting module, the system timing jitter was 17.3 ps. The detector's intrinsic timing jitter was estimated at ∼12.0 ps.