Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1905.04661 · Entropy

Quantum Probes for Ohmic Environments at Thermal Equilibrium

Fahimeh Salari Sehdaran, Matteo Bina, Claudia Benedetti, Matteo Paris

Published May 12, 2019• 34 citations
arXivHTMLPDF

Abstract

It is often the case that the environment of a quantum system may be described as a bath of oscillators with an ohmic density of states. In turn, the precise characterization of these classes of environments is a crucial tool to engineer decoherence or to tailor quantum information protocols. Recently, the use of quantum probes in characterizing ohmic environments at zero-temperature has been discussed, showing that a single qubit provides precise estimation of the cutoff frequency. On the other hand, thermal noise often spoil quantum probing schemes, and for this reason we here extend the analysis to a complex system at thermal equilibrium. In particular, we discuss the interplay between thermal fluctuations and time evolution in determining the precision attainable by quantum probes. Our results show that the presence of thermal fluctuations degrades the precision for low values of the cutoff frequency, i.e., values of the order ω c ≲ T (in natural units). For larger values of ω c , decoherence is mostly due to the structure of environment, rather than thermal fluctuations, such that quantum probing by a single qubit is still an effective estimation procedure.

DOI
10.3390/e21050486

Related papers

Quantum probes for the cutoff frequency of Ohmic environments

Claudia Benedetti, Fahimeh Salari Sehdaran, Mohammad Hossein Zandi +1 more

Quantum probing consists of suitably exploiting a simple, small, and controllable quantum system to characterize a larger and more complex system. Here, we address the estimation of the cutoff frequency of the Ohmic spectral density of a harmonic reservoir by quantum probes. To this aim, we address the use of single-qubit and two-qubit systems and different kinds of coupling with the bath of oscillators. We assess the estimation precision by the quantum Fisher information of the sole quantum probe as well as the corresponding quantum signal-to-noise ratio. We prove that, for most of the values of the Ohmicity parameter, a simple probe such as a single qubit is already optimal for the precise estimation of the cutoff frequency. Indeed for those values, upon considering a two-qubit probe either in a Bell or in separable state, we do not find improvement to the estimation precision. However, we also showed that there exist few conditions where employing two qubits in a Bell state interacting with a common bath is more suitable for precisely estimating the cutoff frequency.

arXiv:1710.02432•Physical Review A•Jan 24, 2018•83 citations

Quantum probing beyond pure dephasing

Dario Tamascelli, Claudia Benedetti, Heinz‐Peter Breuer +1 more

AbstractQuantum probing is the art of exploiting simple quantum systems interacting with a complex environment to extract precise information about some environmental parameters, e.g. the temperature of the environment or its spectral density. Here we analyze the performance of a single-qubit probe in characterizing Ohmic bosonic environments at thermal equilibrium. In particular, we analyze the effects of tuning the interaction Hamiltonian between the probe and the environment, going beyond the traditional paradigm of pure dephasing. In the weak-coupling and short-time regime, we address the dynamics of the probe analytically, whereas numerical simulations are employed in the strong coupling and long-time regime. We then evaluate the quantum Fisher information for the estimation of the cutoff frequency and the temperature of the environment. Our results provide clear evidence that pure dephasing is not optimal, unless we focus attention to short times. In particular, we found several working regimes where the presence of a transverse interaction improves the maximum attainable precision, i.e. it increases the quantum Fisher information. We also explore the role of the initial state of the probe and of the probe characteristic frequency in determining the estimation precision, thus providing quantitative guidelines to design optimized detection to characterize bosonic environments at the quantum level.

•Aug 11, 2020•35 citations

Temperature-enhanced quantum sensing for the cutoff frequency of Ohmic environments

Yuan Ji-Bing, Song Ya-Ju, Tang Shi-Qing +2 more

We investigate the quantum sensing performance of a dephasing qubit as a probe in Ohmic environments, characterized by the coupling strength $η$, the Ohmicity parameter $s$, and the cutoff frequency $ω_c$ to be estimated. The performance is quantified by the dimensionless quantum signal-to-noise ratio $\mathcal{Q}$. We show that the evolution of $\mathcal{Q}$ with the scaled time $ω_c t$ is independent of $ω_c$, and peaks at an optimal time $t_{\text{opt}}$, yielding optimal sensitivity $\mathcal{Q}_{\text{opt}}$. We analyze how $\mathcal{Q}_{\text{opt}}$ depends on $η$, $s$ and the temperature $T$. Our results demonstrate that, for any Ohmic environment, provided that $ω_c t_{\text{opt}} \ll 1$, $\mathcal{Q}_{\text{opt}}$ always reaches the upper bound: $\mathcal{Q}_{\text{max}} = 0.648$ at zero temperature, and consistently attains $\mathcal{Q}_{\text{max}}/4$ at high temperatures. Remarkably, we find that increasing the scaled temperature $T/ω_c$ can enhance $\mathcal{Q}_{\text{opt}}$ by nearly two orders of magnitude compared to its zero-temperature counterpart for certain Ohmic environments. Our work reveals that temperature can serve as a resource to enhance sensing precision, as it accelerates the encoding of the cutoff frequency information into the probe state, thereby enabling optimal measurement within a short time window.

quant-pharXiv:2512.18686•Dec 23, 2025•0 citations

Quantum probing beyond pure dephasing

Dario Tamascelli, Claudia Benedetti, Heinz-Peter Breuer +1 more

Abstract Quantum probing is the art of exploiting simple quantum systems interacting with a complex environment to extract precise information about some environmental parameters, e.g. the temperature of the environment or its spectral density. Here we analyze the performance of a single-qubit probe in characterizing Ohmic bosonic environments at thermal equilibrium. In particular, we analyze the effects of tuning the interaction Hamiltonian between the probe and the environment, going beyond the traditional paradigm of pure dephasing. In the weak-coupling and short-time regime, we address the dynamics of the probe analytically, whereas numerical simulations are employed in the strong coupling and long-time regime. We then evaluate the quantum Fisher information for the estimation of the cutoff frequency and the temperature of the environment. Our results provide clear evidence that pure dephasing is not optimal, unless we focus attention to short times. In particular, we found several working regimes where the presence of a transverse interaction improves the maximum attainable precision, i.e. it increases the quantum Fisher information. We also explore the role of the initial state of the probe and of the probe characteristic frequency in determining the estimation precision, thus providing quantitative guidelines to design optimized detection to characterize bosonic environments at the quantum level.

arXiv:2003.04014•New Journal of Physics•Jun 29, 2020•46 citations

Two-qubit quantum probes for the temperature of an Ohmic environment

Francesca Gebbia, Claudia Benedetti, Fabio Benatti +3 more

We address a particular instance where open quantum systems may be used as quantum probes for an emergent property of a complex system, as the temperature of a thermal bath. The inherent fragility of the quantum probes against decoherence is the key feature making the overall scheme very sensitive. The specific setting examined here is that of quantum thermometry, which aims to exploit decoherence as a resource to estimate the temperature of a sample. We focus on temperature estimation for a bosonic bath at equilibrium in the Ohmic regime (ranging from sub-Ohmic to super-Ohmic), by using pairs of qubits in different initial states and interacting with different environments, consisting either of a single thermal bath or of two independent ones at the same temperature. Our scheme involves pure dephasing of the probes, thus avoiding energy exchange with the sample and the consequent perturbation of temperature itself. We discuss the role of correlations among the probes and the presence of a local versus a global bath. We show that entanglement improves thermometry at short times if the two qubits are embedded in a common bath, whereas if the interaction time is not constrained, then coherence rather than entanglement is the key resource in quantum thermometry.

arXiv:1912.02442•Physical Review A•Mar 17, 2020•65 citations

Hermitian vs non-Hermitian quantum thermometry

Anass Hminat, Abdallah Slaoui, R. Ahl Laamara +1 more

We investigate the dephasing dynamics of a qubit as an effective mechanism for estimating the temperature of its surrounding environment for different symmetrizes. Our approach is fundamentally quantum, leveraging the qubit's susceptibility to decoherence without necessitating thermal equilibrium with the system under study. We also examine how symmetry properties affect the accuracy of information retrieval and the robustness of quantum information storage in such systems, highlighting their potential advantages in mitigating decoherence effects. The optimization of quantum Fisher information is performed with respect to both the interaction duration and the environmental temperature, focusing on Ohmic-like spectral density environments. Furthermore, we explicitly identify the optimal qubit measurement that attains the quantum Cramer-Rao bound for precision. Our findings reveal that optimal estimation arises from a complex interplay between the qubit's dephasing dynamics and the Ohmic characteristics of the environment with a particular focus on non-Hermitian systems that exhibit enhanced resilience to decoherence. Notably, optimal estimation does not occur when the qubit reaches a stationary state nor under conditions of complete dephasing.

arXiv:2509.10840•Sep 13, 2025•1 citation
It is often the case that the environment of a quantum system may be described as a bath of oscillators with an ohmic density of states. In turn, the precise characterization of these classes of environments is a crucial tool to engineer decoherence or to tailor quantum information protocols. Recently, the use of quantum probes in characterizing ohmic environments at zero-temperature has been discussed, showing that a single qubit provides precise estimation of the cutoff frequency. On the other hand, thermal noise often spoil quantum probing schemes, and for this reason we here extend the analysis to a complex system at thermal equilibrium. In particular, we discuss the interplay between thermal fluctuations and time evolution in determining the precision attainable by quantum probes. Our results show that the presence of thermal fluctuations degrades the precision for low values of the cutoff frequency, i.e., values of the order ω c ≲ T (in natural units). For larger values of ω c , decoherence is mostly due to the structure of environment, rather than thermal fluctuations, such that quantum probing by a single qubit is still an effective estimation procedure.
Quantum probing consists of suitably exploiting a simple, small, and controllable quantum system to characterize a larger and more complex system. Here, we address the estimation of the cutoff frequency of the Ohmic spectral density of a harmonic reservoir by quantum probes. To this aim, we address the use of single-qubit and two-qubit systems and different kinds of coupling with the bath of oscillators. We assess the estimation precision by the quantum Fisher information of the sole quantum probe as well as the corresponding quantum signal-to-noise ratio. We prove that, for most of the values of the Ohmicity parameter, a simple probe such as a single qubit is already optimal for the precise estimation of the cutoff frequency. Indeed for those values, upon considering a two-qubit probe either in a Bell or in separable state, we do not find improvement to the estimation precision. However, we also showed that there exist few conditions where employing two qubits in a Bell state interacting with a common bath is more suitable for precisely estimating the cutoff frequency.
AbstractQuantum probing is the art of exploiting simple quantum systems interacting with a complex environment to extract precise information about some environmental parameters, e.g. the temperature of the environment or its spectral density. Here we analyze the performance of a single-qubit probe in characterizing Ohmic bosonic environments at thermal equilibrium. In particular, we analyze the effects of tuning the interaction Hamiltonian between the probe and the environment, going beyond the traditional paradigm of pure dephasing. In the weak-coupling and short-time regime, we address the dynamics of the probe analytically, whereas numerical simulations are employed in the strong coupling and long-time regime. We then evaluate the quantum Fisher information for the estimation of the cutoff frequency and the temperature of the environment. Our results provide clear evidence that pure dephasing is not optimal, unless we focus attention to short times. In particular, we found several working regimes where the presence of a transverse interaction improves the maximum attainable precision, i.e. it increases the quantum Fisher information. We also explore the role of the initial state of the probe and of the probe characteristic frequency in determining the estimation precision, thus providing quantitative guidelines to design optimized detection to characterize bosonic environments at the quantum level.
We investigate the quantum sensing performance of a dephasing qubit as a probe in Ohmic environments, characterized by the coupling strength ηηη, the Ohmicity parameter sss, and the cutoff frequency ωcω_cωc​ to be estimated. The performance is quantified by the dimensionless quantum signal-to-noise ratio Q\mathcal{Q}Q. We show that the evolution of Q\mathcal{Q}Q with the scaled time ωctω_c tωc​t is independent of ωcω_cωc​, and peaks at an optimal time toptt_{\text{opt}}topt​, yielding optimal sensitivity Qopt\mathcal{Q}_{\text{opt}}Qopt​. We analyze how Qopt\mathcal{Q}_{\text{opt}}Qopt​ depends on ηηη, sss and the temperature TTT. Our results demonstrate that, for any Ohmic environment, provided that ωctopt≪1ω_c t_{\text{opt}} \ll 1ωc​topt​≪1, Qopt\mathcal{Q}_{\text{opt}}Qopt​ always reaches the upper bound: Qmax=0.648\mathcal{Q}_{\text{max}} = 0.648Qmax​=0.648 at zero temperature, and consistently attains Qmax/4\mathcal{Q}_{\text{max}}/4Qmax​/4 at high temperatures. Remarkably, we find that increasing the scaled temperature T/ωcT/ω_cT/ωc​ can enhance Qopt\mathcal{Q}_{\text{opt}}Qopt​ by nearly two orders of magnitude compared to its zero-temperature counterpart for certain Ohmic environments. Our work reveals that temperature can serve as a resource to enhance sensing precision, as it accelerates the encoding of the cutoff frequency information into the probe state, thereby enabling optimal measurement within a short time window.
Abstract Quantum probing is the art of exploiting simple quantum systems interacting with a complex environment to extract precise information about some environmental parameters, e.g. the temperature of the environment or its spectral density. Here we analyze the performance of a single-qubit probe in characterizing Ohmic bosonic environments at thermal equilibrium. In particular, we analyze the effects of tuning the interaction Hamiltonian between the probe and the environment, going beyond the traditional paradigm of pure dephasing. In the weak-coupling and short-time regime, we address the dynamics of the probe analytically, whereas numerical simulations are employed in the strong coupling and long-time regime. We then evaluate the quantum Fisher information for the estimation of the cutoff frequency and the temperature of the environment. Our results provide clear evidence that pure dephasing is not optimal, unless we focus attention to short times. In particular, we found several working regimes where the presence of a transverse interaction improves the maximum attainable precision, i.e. it increases the quantum Fisher information. We also explore the role of the initial state of the probe and of the probe characteristic frequency in determining the estimation precision, thus providing quantitative guidelines to design optimized detection to characterize bosonic environments at the quantum level.
We address a particular instance where open quantum systems may be used as quantum probes for an emergent property of a complex system, as the temperature of a thermal bath. The inherent fragility of the quantum probes against decoherence is the key feature making the overall scheme very sensitive. The specific setting examined here is that of quantum thermometry, which aims to exploit decoherence as a resource to estimate the temperature of a sample. We focus on temperature estimation for a bosonic bath at equilibrium in the Ohmic regime (ranging from sub-Ohmic to super-Ohmic), by using pairs of qubits in different initial states and interacting with different environments, consisting either of a single thermal bath or of two independent ones at the same temperature. Our scheme involves pure dephasing of the probes, thus avoiding energy exchange with the sample and the consequent perturbation of temperature itself. We discuss the role of correlations among the probes and the presence of a local versus a global bath. We show that entanglement improves thermometry at short times if the two qubits are embedded in a common bath, whereas if the interaction time is not constrained, then coherence rather than entanglement is the key resource in quantum thermometry.
We investigate the dephasing dynamics of a qubit as an effective mechanism for estimating the temperature of its surrounding environment for different symmetrizes. Our approach is fundamentally quantum, leveraging the qubit's susceptibility to decoherence without necessitating thermal equilibrium with the system under study. We also examine how symmetry properties affect the accuracy of information retrieval and the robustness of quantum information storage in such systems, highlighting their potential advantages in mitigating decoherence effects. The optimization of quantum Fisher information is performed with respect to both the interaction duration and the environmental temperature, focusing on Ohmic-like spectral density environments. Furthermore, we explicitly identify the optimal qubit measurement that attains the quantum Cramer-Rao bound for precision. Our findings reveal that optimal estimation arises from a complex interplay between the qubit's dephasing dynamics and the Ohmic characteristics of the environment with a particular focus on non-Hermitian systems that exhibit enhanced resilience to decoherence. Notably, optimal estimation does not occur when the qubit reaches a stationary state nor under conditions of complete dephasing.