Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1904.06200 · Physical Review A

Experimental investigation of linear-optics-based quantum target detection

G. H. Aguilar, Muriel A. de Souza, Rafael M. Gomes, Jayne E. Thompson, Mile Gu, Lucas C. Céleri, Stephen Patrick Walborn

Published May 9, 2019• 22 citations
arXivHTMLPDF

Abstract

The development of new techniques to improve measurements is crucial for all sciences. By employing quantum systems as sensors to probe some physical property of interest allows the application of quantum resources, such as coherent superpositions and quantum correlations, to increase measurement precision. Here we experimentally investigate a scheme for quantum target detection based on linear optical measurement devices, when the object is immersed in unpolarized background light. By comparing the quantum (polarization-entangled photon pairs) and the classical (separable polarization states) strategies, we found that the quantum strategy provides us an improvement over the classical one in our experiment when the signal-to-noise ratio is greater than 1/40, or about 16 dB of noise. This is in constrast to quantum target detection considering nonlinear optical detection schemes, which have shown resilience to extreme amounts of noise. A theoretical model is developed which shows that, in this linear-optics context, the quantum strategy suffers from the contribution of multiple background photons. This effect does not appear in our classical scheme. By improving the two-photon detection electronics, it should be possible to achieve a polarization-based quantum advantage for a signal-to-noise ratio that is close to 1/400 for current technology.

DOI
10.1103/physreva.99.053813

Related papers

Quantum illumination using polarization-path entangled single photons for low reflectivity object detection in a noisy background

K. Muhammed Shafi, A. Padhye, C. M. Chandrashekar

Detecting object with low reflectivity embedded within a noisy background is a challenging task. Quantum correlations between pairs of quantum states of light, though are highly sensitive to background noise and losses, offer advantages over traditional illumination methods. Instead of using correlated photon pairs which are sensitive, we experimentally demonstrate the advantage of using heralded single-photons entangled in polarization and path degree of freedom for quantum illumination. In the study, the object of different reflectivity is placed along the path of the signal in a variable thermal background before taking the joint measurements and calculating the quantum correlations. We show the significant advantage of using non-interferometric measurements along the multiple paths for single photon to isolate the signal from the background noise and outperform in detecting and ranging the low reflectivity objects even when the signal-to-noise ratio is as low as 0.03. Decrease in visibility of polarization along the signal path also results in similar observations. This will have direct relevance to the development of single-photon based quantum LiDAR and quantum imaging.

arXiv:2303.05218•Optics Express•Aug 16, 2023•9 citations

Opportunities and Challenges in Quantum-Enhanced Optical Target Detection

Han Liu, Amr Saher Helmy

The goal of optical target detection is to identify the presence or absence of a target object by using light or photons as the transmitter. This technique offers significant advantages, such as high resolution and precise directionality, and plays a key role in applications like LiDAR. One of the critical performance metrics in optical target detection is noise resilience─specifically, the system’s ability to distinguish reflected signals from crosstalk or jamming sources with similar optical properties. Traditionally, this challenge has been addressed through classical information processing or standard optical filtering methods. However, a new approach to improving noise resilience has recently captured the attention of numerous researchers: harnessing the unique properties of quantum light sources. These sources offer performance enhancements that are challenging or even impossible to achieve with conventional coherent optical sources. In this perspective, we examine the performance and limitations of this emerging method, including challenges related to receiver complexity and power scaling. We also explore potential strategies to overcome these limitations, highlighting the practical advantages these approaches could offer.

ACS Photonics•Mar 6, 2025•4 citations

Noise-Tolerant Object Ranging with a Time- and Polarization-Correlated Photon Pair Source

Hashir Kuniyil, Helin Ozel, Hasan Yılmaz +1 more

Imaging, detection and ranging of objects in the presence of significant background noise is a fundamental challenge in optical sensing. Overcoming the limitations imposed in conventional methods, quantum light sources show higher resistance against noise in a time correlation-based detection scheme. Here, we introduce the advantage of using not only time correlations, but also polarization correlations in photon pairs in the detection of an object that is embedded in a noisy background. In this direction, a time- and polarization-correlated photon-pair source using the spontaneous parametric down-conversion process is exploited. We found that the joint measurement of correlated pairs allows to distinguish the signal from the noise photons and that leads to an improved signal-to-noise ratio. Our comparative study revealed that using polarization correlations in addition to time correlations provides improved noise rejection.

•Nov 7, 2021•0 citations

Noise-tolerant object detection and ranging using quantum correlations

Hashir Kuniyil, Helin Ozel, Hasan Yılmaz +1 more

Abstract Imaging, detection and ranging of objects in the presence of significant background noise is a fundamental challenge in optical sensing. Overcoming the limitations imposed in conventional methods, quantum light sources show higher resistance against noise in a time-correlation-based quantum illumination. Here, we introduce the advantage of using not only time correlations but also polarization correlations in photon pairs in the detection of an object that is embedded in a noisy background. In this direction, a time- and polarization-correlated photon pair source using the spontaneous parametric down-conversion process is exploited. We found that the joint measurement of correlated pairs allows distinguishing the signal from the noise photons and that leads to an improved signal-to-noise ratio. Our comparative study revealed that using polarization correlations in addition to time correlations provides improved noise rejection. Furthermore, we show that polarization correlation allows undoing the detector limitation where high background often leads to detector saturation.

arXiv:2111.04062•Journal of Optics•Aug 15, 2022•9 citations

Quantum-enhanced standoff detection using correlated photon pairs

Duncan G. England, Bhashyam Balaji, Benjamin Sussman

We investigate the use of correlated photon pair sources for the improved quantum-level detection of a target in the presence of a noise background. Photon pairs are generated by spontaneous four-wave mixing, one photon from each pair (the herald) is measured locally while the other (the signal) is sent to illuminate the target. Following diffuse reflection from the target, the signal photons are detected by a receiver and nonclassical timing correlations between the signal and herald are measured in the presence of a configurable background noise source. Quantum correlations from the photon pair source can be used to provide an enhanced signal-to-noise ratio when compared to a classical light source of the same intensity.

arXiv:1811.04113•Physical Review A•Feb 19, 2019•139 citations

Quantum LiDAR with non-local modulation

Xiao-Dong Fan, Zhong-Hua Ou, Yun-Ru Fan +13 more

Quantum light detection and ranging (LiDAR) utilizes quantum entanglement and correlation to improve precision, noise resilience and covertness of target detection. Despite recent advances, the development of a quantum LiDAR system that simultaneously achieves high precision and a large measurement range remains challenging. Here, we demonstrate a quantum amplitude-modulated continuous wave LiDAR with micrometer precision achievable via increased acquisition time and meter-scale measurement range. In our demonstration, the signal photons directly illuminate the target, while the idler photons are non-locally modulated with a high-frequency cosine wave and never interact with the target. By leveraging the non-local modulation and the quantum correlation, the target detection is achieved with a precision of 0.64 $\pm$ 0.06 mm within one second over a measurement range of 2-8 m. As the acquisition time is up to 500 s, the system achieves a precision of 29 $\pm\ 4{\ \mathrm{μm}}$. Furthermore, our system realizes a 50 times precision improvement over the classical single-photon scheme in a background noise 37 dB stronger than the returned probe photons. With these advantages, our method will open venues for the development of high-precision, long-range, and noise-resilient target detection.

quant-pharXiv:2606.27838•Jun 29, 2026•0 citations
The development of new techniques to improve measurements is crucial for all sciences. By employing quantum systems as sensors to probe some physical property of interest allows the application of quantum resources, such as coherent superpositions and quantum correlations, to increase measurement precision. Here we experimentally investigate a scheme for quantum target detection based on linear optical measurement devices, when the object is immersed in unpolarized background light. By comparing the quantum (polarization-entangled photon pairs) and the classical (separable polarization states) strategies, we found that the quantum strategy provides us an improvement over the classical one in our experiment when the signal-to-noise ratio is greater than 1/40, or about 16 dB of noise. This is in constrast to quantum target detection considering nonlinear optical detection schemes, which have shown resilience to extreme amounts of noise. A theoretical model is developed which shows that, in this linear-optics context, the quantum strategy suffers from the contribution of multiple background photons. This effect does not appear in our classical scheme. By improving the two-photon detection electronics, it should be possible to achieve a polarization-based quantum advantage for a signal-to-noise ratio that is close to 1/400 for current technology.
Detecting object with low reflectivity embedded within a noisy background is a challenging task. Quantum correlations between pairs of quantum states of light, though are highly sensitive to background noise and losses, offer advantages over traditional illumination methods. Instead of using correlated photon pairs which are sensitive, we experimentally demonstrate the advantage of using heralded single-photons entangled in polarization and path degree of freedom for quantum illumination. In the study, the object of different reflectivity is placed along the path of the signal in a variable thermal background before taking the joint measurements and calculating the quantum correlations. We show the significant advantage of using non-interferometric measurements along the multiple paths for single photon to isolate the signal from the background noise and outperform in detecting and ranging the low reflectivity objects even when the signal-to-noise ratio is as low as 0.03. Decrease in visibility of polarization along the signal path also results in similar observations. This will have direct relevance to the development of single-photon based quantum LiDAR and quantum imaging.
The goal of optical target detection is to identify the presence or absence of a target object by using light or photons as the transmitter. This technique offers significant advantages, such as high resolution and precise directionality, and plays a key role in applications like LiDAR. One of the critical performance metrics in optical target detection is noise resilience─specifically, the system’s ability to distinguish reflected signals from crosstalk or jamming sources with similar optical properties. Traditionally, this challenge has been addressed through classical information processing or standard optical filtering methods. However, a new approach to improving noise resilience has recently captured the attention of numerous researchers: harnessing the unique properties of quantum light sources. These sources offer performance enhancements that are challenging or even impossible to achieve with conventional coherent optical sources. In this perspective, we examine the performance and limitations of this emerging method, including challenges related to receiver complexity and power scaling. We also explore potential strategies to overcome these limitations, highlighting the practical advantages these approaches could offer.
Imaging, detection and ranging of objects in the presence of significant background noise is a fundamental challenge in optical sensing. Overcoming the limitations imposed in conventional methods, quantum light sources show higher resistance against noise in a time correlation-based detection scheme. Here, we introduce the advantage of using not only time correlations, but also polarization correlations in photon pairs in the detection of an object that is embedded in a noisy background. In this direction, a time- and polarization-correlated photon-pair source using the spontaneous parametric down-conversion process is exploited. We found that the joint measurement of correlated pairs allows to distinguish the signal from the noise photons and that leads to an improved signal-to-noise ratio. Our comparative study revealed that using polarization correlations in addition to time correlations provides improved noise rejection.
Abstract Imaging, detection and ranging of objects in the presence of significant background noise is a fundamental challenge in optical sensing. Overcoming the limitations imposed in conventional methods, quantum light sources show higher resistance against noise in a time-correlation-based quantum illumination. Here, we introduce the advantage of using not only time correlations but also polarization correlations in photon pairs in the detection of an object that is embedded in a noisy background. In this direction, a time- and polarization-correlated photon pair source using the spontaneous parametric down-conversion process is exploited. We found that the joint measurement of correlated pairs allows distinguishing the signal from the noise photons and that leads to an improved signal-to-noise ratio. Our comparative study revealed that using polarization correlations in addition to time correlations provides improved noise rejection. Furthermore, we show that polarization correlation allows undoing the detector limitation where high background often leads to detector saturation.
We investigate the use of correlated photon pair sources for the improved quantum-level detection of a target in the presence of a noise background. Photon pairs are generated by spontaneous four-wave mixing, one photon from each pair (the herald) is measured locally while the other (the signal) is sent to illuminate the target. Following diffuse reflection from the target, the signal photons are detected by a receiver and nonclassical timing correlations between the signal and herald are measured in the presence of a configurable background noise source. Quantum correlations from the photon pair source can be used to provide an enhanced signal-to-noise ratio when compared to a classical light source of the same intensity.
Quantum light detection and ranging (LiDAR) utilizes quantum entanglement and correlation to improve precision, noise resilience and covertness of target detection. Despite recent advances, the development of a quantum LiDAR system that simultaneously achieves high precision and a large measurement range remains challenging. Here, we demonstrate a quantum amplitude-modulated continuous wave LiDAR with micrometer precision achievable via increased acquisition time and meter-scale measurement range. In our demonstration, the signal photons directly illuminate the target, while the idler photons are non-locally modulated with a high-frequency cosine wave and never interact with the target. By leveraging the non-local modulation and the quantum correlation, the target detection is achieved with a precision of 0.64 ±\pm± 0.06 mm within one second over a measurement range of 2-8 m. As the acquisition time is up to 500 s, the system achieves a precision of 29 ± 4 μm\pm\ 4{\ \mathrm{μm}}± 4 μm. Furthermore, our system realizes a 50 times precision improvement over the classical single-photon scheme in a background noise 37 dB stronger than the returned probe photons. With these advantages, our method will open venues for the development of high-precision, long-range, and noise-resilient target detection.