Decoherence of quantum states is a major hurdle towards scalable and reliable quantum computing. Lower decoherence (i.e., higher fidelity) can alleviate the error correction overhead and obviate the need for energy-intensive noise reduction techniques e.g., cryogenic cooling. In this paper, we performed a noise-induced decoherence analysis of single and multi-qubit quantum gates using physics-based simulations. The analysis indicates that (i) decoherence depends on the input state and the gate type. Larger number of $|1\rangle$ states worsen the decoherence; (ii) amplitude damping is more detrimental than phase damping; (iii) shorter depth implementation of a quantum function can achieve lower decoherence. Simulations indicate 20\% improvement in the fidelity of a quantum adder when realized using lower depth topology. The insights developed in this paper can be exploited by the circuit designer to choose the right gates and logic implementation to optimize the system-level fidelity.
Decoherence of quantum states is a major hurdle towards scalable and reliable quantum computing. Lower decoherence (i.e., higher fidelity) can alleviate the error correction overhead and obviate the need for energy-intensive noise reduction techniques e.g., cryogenic cooling. In this paper, we performed a noise-induced decoherence analysis of single and multi-qubit quantum gates using physics-based simulations. The analysis indicates that (i) decoherence depends on the input state and the gate type. Larger number of ∣1⟩ states worsen the decoherence; (ii) amplitude damping is more detrimental than phase damping; (iii) shorter depth implementation of a quantum function can achieve lower decoherence. Simulations indicate 20% improvement in the fidelity of a quantum adder when realized using lower depth topology. The insights developed in this paper can be exploited by the circuit designer to choose the right gates and logic implementation to optimize the system-level fidelity.
The "Noisy intermediate-scale quantum" NISQ machine era primarily focuses on mitigating noise, controlling errors, and executing high-fidelity operations, hence requiring shallow circuit depth and noise robustness. Approximate computing is a novel computing paradigm that produces imprecise results by relaxing the need for fully precise output for error-tolerant applications including multimedia, data mining, and image processing. We investigate how approximate computing can improve the noise resilience of quantum adder circuits in NISQ quantum computing. We propose five designs of approximate quantum adders to reduce depth while making them noise-resilient, in which three designs are with carryout, while two are without carryout. We have used novel design approaches that include approximating the Sum only from the inputs (pass-through designs) and having zero depth, as they need no quantum gates. The second design style uses a single CNOT gate to approximate the SUM with a constant depth of O(1). We performed our experimentation on IBM Qiskit on noise models including thermal, depolarizing, amplitude damping, phase damping, and bitflip: (i) Compared to exact quantum ripple carry adder without carryout the proposed approximate adders without carryout have improved fidelity ranging from 8.34% to 219.22%, and (ii) Compared to exact quantum ripple carry adder with carryout the proposed approximate adders with carryout have improved fidelity ranging from 8.23% to 371%. Further, the proposed approximate quantum adders are evaluated in terms of various error metrics.
The viability of algorithms on Noisy Intermediate-Scale Quantum (NISQ) computers is limited by operational errors and decoherence. To optimize execution, it is crucial to understand how circuit complexity (depth and number of gates), statistical sampling (shots), and result fidelity interact. This work investigates that relationship through large-scale simulations of 100,000 random circuits under a physically motivated noise model with temporal decoherence (T1/T2) and gate errors. The analysis shows a strong negative correlation between circuit complexity and Hellinger fidelity, revealing a “fidelity ceiling” where increasing shots reduces statistical error but cannot overcome noise. For complex circuits, the number of gates is identified as a stronger predictor of error than circuit depth.
Near-term quantum computers have been built as intermediate-scale quantum devices and are fragile against quantum noise effects, namely, NISQ devices. Traditional quantum-error-correcting codes are not implemented on such devices and to perform quantum computation in good accuracy with these machines we need to develop alternative approaches for mitigating quantum computational errors. In this work, we propose quantum error mitigation (QEM) scheme for quantum computational errors which occur due to couplings with environments during gate operations, i.e., decoherence. To establish our QEM scheme, first we estimate the quantum noise effects on single-qubit states and represent them as groups of quantum circuits, namely, quantum-noise-effect circuit groups. Then our QEM scheme is conducted by subtracting expectation values generated by the quantum-noise-effect circuit groups from those obtained by the quantum circuits for the quantum algorithms under consideration. As a result, the quantum noise effects are reduced, and we obtain approximately the ideal expectation values via the quantum-noise-effect circuit groups and the numbers of elementary quantum circuits composing them scale polynomial with respect to the products of the depths of quantum algorithms and the numbers of register bits. To numerically demonstrate the validity of our QEM scheme, we run noisy quantum simulations of qubits under amplitude damping effects for four types of quantum algorithms. Furthermore, we implement our QEM scheme on IBM Q Experience processors and examine its efficacy. Consequently, the validity of our scheme is verified via both the quantum simulations and the quantum computations on the real quantum devices. Our QEM scheme is solely composed of quantum-computational operations (quantum gates and measurements), and thus, it can be conducted by any type of quantum device. In addition, it can be applied to error mitigation for many other types of quantum noise effects as well as noisy quantum computing of long-depth quantum algorithms.
The development of complex circuits for practical applications in the current quantum computing ecosystem is based on basic primitives such as Bell states, which provide superposition, entanglement, and coherence. The range of domain-specific quantum applications has been greatly expanded by the availability of simulators and platforms such as IBM Quantum, which are supported by Qiskit. However, disparities between ideal simulator outputs and actual quantum processing unit (QPU) executions in the Noisy Intermediate-Scale Quantum (NISQ) era require the application of quantum error mitigation techniques. Limitations arise from hardware constraints in superconducting qubit systems and from the limited resources of classical simulators as quantum circuits grow. Quantum decoherence, which lowers gate fidelity and builds up at the circuit level with increasing depth, is specifically caused by material-induced flaws and interfaces. This creates a clear connection between circuit reliability, device performance, and material attributes. To address this, the current work uses both simulation and actual hardware on the IBM Sherbrooke 127-qubit processor to study three basic circuit classes over 4 to 10 qubits: the quantum Fourier transform, the Greenberger-Horne-Zeilinger state, and the W state. The study examines trade-offs between circuit complexity, noise robustness, and resource utilization by contrasting simulator and QPU results. The results imply that circuit fidelity can serve as an indirect probe of material-limited noise, opening the door to a framework for designing quantum circuits that accounts for both hardware and materials to achieve scalable quantum advantage.
The advent of noisy intermediate-scale quantum (NISQ) devices has not only opened up new possibilities to studying quantum computational benefits, but it has also presented new challenges associated with noise and short coherence times. Entanglement is one of the inherent resources that can be used to perform quantum computation and implement the performance and reliability of quantum algorithms. This paper looks at entanglement dynamics in NISQ machines subjected to natural noises. The study focuses on the problem of examining the role of various noise channels in the creation, dynamics, and decay of the entanglement during quantum operations, such as depolarizing, amplitude damping, and phase damping. The study is based on theoretical modeling and numerical simulations of multi-qubit quantum circuits to determine the stability of entangled states with respect to circuit depth and intensity of noise. Concurrence and von Neumann entropy are examples of entanglement measures that are used to characterize correlations between qubits as well as to trace the dynamics of these correlations across computational interactions. The results show that noise has major impacts on entanglement distribution, which tends to cause rapid decays in highly entangled states with increase in circuit complexity. The findings, however, also show that there are some circuit architectures and error-mitigation schemes that can somewhat sustain entanglement with moderate levels of noise. The paper also emphasizes the relevance of minimalizing sequence of gates, and reduced circuit depth in an effort to preserve useful entanglement in present-day quantum hardware. These observations help in understanding the behaviour of quantum correlations better in real world quantum devices and provide a way of developing more resilient quantum algorithms that would work on NISQ systems. In general, the article offers a systematic view on entanglement behavior in disordered quantum systems and highlights its value in the development of quantum computing applications in the near term.