arXiv:1903.11637 · Journal of Chemical Theory and Computation
Improving the Efficiency of the Multireference Driven Similarity Renormalization Group via Sequential Transformation, Density Fitting, and the Noninteracting Virtual Orbital Approximation
Tianyuan Zhang, Chenyang Li, Francesco A. Evangelista
This study examines several techniques to improve the efficiency of the linearized multireference driven similarity renormalization group truncated to one- and two-body operators [MR-LDSRG(2)]. We propose a sequential MR-LDSRG(2) [sq-MR-LDSRG(2)] scheme, in which one-body substitutions are folded exactly into the Hamiltonian. This new approach is combined with density fitting (DF) to reduce the storage cost of two-electron integrals. To further avoid storage of large four-index intermediates, we propose a noninteracting virtual orbital (NIVO) approximation of the Baker-Campbell-Hausdorff series that neglects commutators terms with three and four virtual indices. The NIVO approximation reduces the computational prefactor of the MR-LDSRG(2), bringing it closer to that of coupled cluster with singles and doubles (CCSD). We test the effect of the DF and NIVO approximations on the MR-LDSRG(2) and sq-MR-LDSRG(2) methods by computing properties of eight diatomic molecules. The diatomic constants obtained by DF-sq-MR-LDSRG(2)+NIVO are found to be as accurate as those from the original MR-LDSRG(2) and coupled cluster theory with singles, doubles, and perturbative triples. Finally, we demonstrate that the DF-sq-MR-LDSRG(2)+NIVO scheme can be applied to chemical systems with more than 550 basis functions by computing the automerization energy of cyclobutadiene with a quintuple-ζ basis set. The predicted automerization energy is found to be similar to the value computed with Mukherjee's state-specific multireference coupled cluster theory with singles and doubles.
This study examines several techniques to improve the efficiency of the linearized multireference driven similarity renormalization group truncated to one- and two-body operators [MR-LDSRG(2)]. We propose a sequential MR-LDSRG(2) [sq-MR-LDSRG(2)] scheme, in which one-body substitutions are folded exactly into the Hamiltonian. This new approach is combined with density fitting (DF) to reduce the storage cost of two-electron integrals. To further avoid storage of large four-index intermediates, we propose a noninteracting virtual orbital (NIVO) approximation of the Baker-Campbell-Hausdorff series that neglects commutators terms with three and four virtual indices. The NIVO approximation reduces the computational prefactor of the MR-LDSRG(2), bringing it closer to that of coupled cluster with singles and doubles (CCSD). We test the effect of the DF and NIVO approximations on the MR-LDSRG(2) and sq-MR-LDSRG(2) methods by computing properties of eight diatomic molecules. The diatomic constants obtained by DF-sq-MR-LDSRG(2)+NIVO are found to be as accurate as those from the original MR-LDSRG(2) and coupled cluster theory with singles, doubles, and perturbative triples. Finally, we demonstrate that the DF-sq-MR-LDSRG(2)+NIVO scheme can be applied to chemical systems with more than 550 basis functions by computing the automerization energy of cyclobutadiene with a quintuple-ζ basis set. The predicted automerization energy is found to be similar to the value computed with Mukherjee's state-specific multireference coupled cluster theory with singles and doubles.
This work introduces various approaches to include connected three-body terms in unitary many-body theories, focusing on the driven similarity renormalization group (DSRG). Starting from the least approximate method-the linearized DSRG truncated to one-, two-, and three-body operators [LDSRG(3)]-we develop several approximate LDSRG(3) models with reduced computational cost. Through a perturbative analysis, we motivate a family of iterative LDSRG(3)-n and -n' (n = 1, 2, 3, 4) methods that contain a subset of the LDSRG(3) diagrams. Among these variants, the LDSRG(3)-2 scheme has the same computational complexity of coupled cluster theory with singles, doubles, and triples (CCSDT), but it outperforms CCSDT in the accuracy of the predicted correlation energies. We also propose and implement two perturbative triples corrections based on the linearized DSRG truncated to one- and two-body operators augmented with recursive semi-quadratic commutators [qDSRG(2)]. The resulting qDSRG(2)+(T) approach matches the accuracy of the "gold-standard" coupled cluster theory with singles, doubles, and perturbative triples model on the energetics of twenty-eight closed-shell atoms and small molecules.
We derive analytic energy gradients of the driven similarity renormalization group (DSRG) multireference second-order perturbation theory (MRPT2) using the method of Lagrange multipliers. In the Lagrangian, we impose constraints for a complete-active-space self-consistent-field reference wave function and the semicanonical orthonormal molecular orbitals. Solving the associated Lagrange multipliers is found to share the same asymptotic scaling of a single DSRG-MRPT2 energy computation. A pilot implementation of the DSRG-MRPT2 analytic gradients is used to optimize the geometry of the singlet and triplet states of p-benzyne. The equilibrium bond lengths and angles are similar to those computed via other MRPT2s and Mukherjee's multireference coupled cluster theory. An approximate DSRG-MRPT2 method that neglects the contributions of three-body density cumulant is found to introduce negligible errors in the geometry of p-benzyne, lending itself to a promising low-cost approach for molecular geometry optimizations using large active spaces.
Applications of the similarity renormalization group (SRG) approach [F. Wegner, Ann. Phys. 506, 77 (1994) and S. D. Głazek and K. G. Wilson, Phys. Rev. D 49, 4214 (1994)] to the formulation of useful many-body theories of electron correlation are considered. In addition to presenting a production-level implementation of the SRG based on a single-reference formalism, a novel integral version of the SRG is reported, in which the flow of the Hamiltonian is driven by a source operator. It is shown that this driven SRG (DSRG) produces a Hamiltonian flow that is analogous to that of the SRG. Compared to the SRG, which requires propagating a set of ordinary differential equations, the DSRG is computationally advantageous since it consists of a set of polynomial equations. The equilibrium distances, harmonic vibrational frequencies, and vibrational anharmonicities of a series of diatomic molecules computed with the SRG and DSRG approximated with one- and two-body normal ordered operators are in good agreement with benchmark values from coupled cluster with singles, doubles, and perturbative triples. Particularly surprising results are found when the SRG and DSRG methods are applied to C2 and F2. In the former case, both methods fail to converge, while in the latter case an unbound potential energy curve is obtained. A modified commutator approximation is shown to correct these problems in the case of the DSRG method.
This article presents an efficient and parallelized implementation of the density matrix renormalization group (DMRG) algorithm for quantum chemistry calculations. The DMRG method as a large-scale multireference electronic structure model is by nature particularly efficient for one-dimensionally correlated systems, while the present development is oriented toward applications for polynuclear transition metal compounds, in which the macroscopic one-dimensional structure of electron correlation is absent. A straightforward extension of the DMRG algorithm is proposed with further improvements and aggressive optimizations to allow its application with large multireference active space, which is often demanded for metal compound calculations. Special efficiency is achieved by making better use of sparsity and symmetry in the operator and wave function representations. By accomplishing computationally intensive DMRG calculations, the authors have found that a large number of renormalized basis states are required to represent high entanglement of the electron correlation for metal compound applications, and it is crucial to adopt auxiliary perturbative correction to the projected density matrix during the DMRG sweep optimization in order to attain proper convergence to the solution. Potential energy curve calculations for the Cr(2) molecule near the known equilibrium precisely predicted the full configuration interaction energies with a correlation space of 24 electrons in 30 orbitals [denoted by (24e,30o)]. The energies are demonstrated to be accurate to 0.6mE(h) (the error from the extrapolated best value) when as many as 10,000 renormalized basis states are employed for the left and right DMRG block representations. The relative energy curves for [Cu(2)O(2)](2+) along the isomerization coordinate were obtained from DMRG and other correlated calculations, for which a fairly large orbital space (32e,62o) is modeled as a full correlation space. The DMRG prediction nearly overlaps with the energy curve from the coupled cluster with singles, doubles, and perturbative triple [CCSD(T)] calculations, while the multireference complete active space self-consistent field (CASSCF) calculations with the small reference configuration (8e,8o) are found to overestimate the biradical character of the electronic state of [Cu(2)O(2)](2+) according to the one-electron density matrix analysis.
We present an economical approach to treat spin-orbit coupling (SOC) in the state-averaged driven similarity renormalization group second-order perturbation theory (SA-DSRG-PT2). The electron correlation is first introduced by forming the SA-DSRG-PT2 dressed spin-free Hamiltonian. This Hamiltonian is then augmented with the Breit-Pauli Hamiltonian and diagonalized using spin-pure reference states to obtain the SOC-corrected energy spectrum. The spin-orbit mean-field approximation is also assumed to reduce the cost associated with the two-electron spin-orbit integrals. The resulting method is termed BP1-SA-DSRG-PT2c, and it possesses the same computational scaling as the non-relativistic counterpart, where only the one- and two-body density cumulants are required to obtain the vertical transition energy. The accuracy of BP1-SA-DSRG-PT2c is assessed on a few atoms and small molecules, including main-group diatomic molecules, transition-metal atoms, and actinide dioxide cations. Numerical results suggest that BP1-SA-DSRG-PT2c performs comparably to other internally contracted multireference perturbation theories with SOC treated using the state interaction scheme.
In the past decade, the quantum chemical version of the density matrix renormalization group method has established itself as the method of choice for strongly correlated molecular systems. However, despite its favorable scaling, in practice, it is not suitable for computations of dynamic correlation. Several approaches to include that in post-DMRG methods exist; in our group, we focused on the tailored coupled cluster (TCC) approach. This method works well in many situations; however, in exactly degenerate cases (with two or more determinants of equal weight), it exhibits a bias toward the reference determinant representing the Fermi vacuum. Although sometimes it is possible to use a compensation scheme to avoid this bias for energy differences, it is certainly a drawback. In order to overcome this bias of the TCC method, we have developed a Hilbert-space multireference version of tailored CC, which can treat several determinants on an equal footing. We have implemented and compared the performance of three Hilbert-space multireference coupled cluster (MRCC) variants-the state universal one and the Brillouin-Wigner and Mukherjee's state specific ones. We have assessed these approaches on the cyclobutadiene and tetramethyleneethane molecules, which are both diradicals with exactly degenerate determinants at a certain geometry. We have also investigated the sensitivity of the results on the orbital rotation of the highest occupied and lowest unoccupied molecular orbital (HOMO-LUMO) pair, as it is well known that Hilbert-space MRCC methods are not invariant to such transformations.