Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1903.00187 · Journal of the Physical Society of Japan

Superconducting Quantum Annealing Architecture with LC Resonators

Hiroto Mukai, Akiyoshi Tomonaga, Jaw-Shen Tsai

Published Apr 12, 2019• 18 citations
arXivHTMLPDF

Abstract

We propose a novel architecture for superconducting circuits to improve the efficiency of a quantum annealing system. To increase the capability of a circuit, it is desirable for a qubit to be coupled not only with adjacent qubits but also with other qubits located far away. We introduce a circuit that uses a lumped element resonator coupled each with one qubit. The resonator-qubit pairs are coupled by rf-superconducting quantum interference device (SQUID) based couplers. These pairs make a large quantum system for quantum annealer. This system could prepare the problem Hamiltonian and tune the parameters for quantum annealing procedure.

DOI
10.7566/jpsj.88.061011

Related papers

Ultrastrong Tunable Coupler Between Superconducting LC Resonators

T. Miyanaga, Akiyoshi Tomonaga, H. Ito +2 more

We investigate the ultrastrong tunable coupler for coupling of superconducting resonators. The obtained coupling constant exceeds 1 GHz, and the wide-range tunability is achieved for both antiferromagnetics and ferromagnetics from $\ensuremath{-}1086$ to 604 MHz. The ultrastrong coupler is composed of a rf superconducting quantum interference device (SQUID) and dc SQUID as tunable junctions, which connect to resonators via shared aluminum thin-film meander lines enabling such a huge coupling constant. The spectrum of the coupler obviously shows the breaking of the rotating-wave approximation, and our circuit model treating the Josephson junction as a tunable inductance reproduces the experimental results well. The ultrastrong coupler is expected to be utilized in quantum annealing circuits and/or noisy intermediate-scale quantum devices with dense connections between qubits.

arXiv:2107.13175•Physical Review Applied•Dec 16, 2021•18 citations

Quantum information processing with tunable and low-loss superconducting circuits

Andreas Bengtsson

The perhaps most promising platform for quantum information processing is the circuit-QED architecture based on superconducting circuits representing quantum bits. These circuits must be made with low losses so that the quantum information is retained for as long as possible. We developed fabrication processes achieving state-of-the-art coherence times of over 100 µs. We identified the primary source of loss to be parasitic two-level systems by studying fluctuations of qubit relaxation times.Using our high-coherence circuits, we implemented a quantum processor built on fixed-frequency qubits and frequency-tunable couplers. The tunable couplers were lumped-element LC resonators, where the inductance came from a superconducting quantum interference device (SQUID). We achieved a controlled-phase gate with a fidelity of 99% by parametric modulation of the coupler frequency. Using this device, and another similar to it, we demonstrated two different quantum algorithms, the quantum approximate optimization algorithm, and density matrix exponentiation. We achieved high algorithmic fidelities, aided by our carefully calibrated gates.Additionally, we researched parametric oscillations using frequency-tunable resonators. Previously, degenerate parametric oscillations have been demonstrated by modulation of the resonant frequency at twice that frequency. We use this phenomenon to implement a readout method for a superconducting qubit with a fidelity of 98.7%. We demonstrated correlated radiation in nondegenerate parametric oscillations by modulating at the sum of two resonant frequencies of a multimode resonator. We showed an excellent quantitative agreement between the classical properties of the oscillations with a theoretical model. Moreover, we studied higher-order modulation at up to five times their resonant frequencies. These types of parametric oscillation states might be used as a quantum resource for continuous-variable quantum computing.

•Jan 1, 2020•2 citations

Application in Adiabatic Quantum Annealing

Siyuan Han

This chapter focuses on the application of Nb Josephson junctions (JJs) in quantum annealing (QA). It begins with a brief introduction to diffident strategies for implementing quantum computation (QC) with an emphasis on quantum annealing. The chapter presents the basic physics of the simplest superconducting flux qubit: radio frequency superconducting quantum interference devices (RF-SQUID). It gives a brief description on the design and realization of couplers, and control and measurement circuitry using Nb Josephson junctions. The chapter describes a scalable architecture upon which quantum annealing processors consisting up to 1024 superconducting flux qubits made of more than 104 Nb Josephson junctions. It discusses evidence on whether D-Wave 2X, which is the latest quantum annealing processor available, works as expected. The chapter also focuses on the physics and application of RF-SQUID flux qubits because the fundamental building blocks of the most advanced quantum annealers demonstrated so far are variations of superconducting flux qubits with one Josephson junction, a.k.a. the RF-SQUID.

•Aug 22, 2017•0 citations

Architectural Considerations in the Design of a Superconducting Quantum Annealing Processor

P. I. Bunyk, Emile Hoskinson, Mark W. Johnson +8 more

We have developed a quantum annealing processor, based on an array of tunable coupled rf-SQUID flux qubits, fabricated in a superconducting integrated circuit process. Implementing this type of processor at a scale of 512 qubits and 1472 programmable interqubit couplers and operating at ~ 20 mK has required attention to a number of considerations that one may ignore at the smaller scale of a few dozen or so devices. Here, we discuss some of these considerations, and the delicate balance necessary for the construction of a practical processor that respects the demanding physical requirements imposed by a quantum algorithm. In particular, we will review some of the design tradeoffs at play in the floor planning of the physical layout, driven by the desire to have an algorithmically useful set of interqubit couplers, and the simultaneous need to embed programmable control circuitry into the processor fabric. In this context, we have developed a new ultralow-power embedded superconducting digital-to-analog flux converter (DAC) used to program the processor with zero static power dissipation, optimized to achieve maximum flux storage density per unit area. The 512 single-stage, 3520 two-stage, and 512 three-stage flux DACs are controlled with an XYZ addressing scheme requiring 56 wires. Our estimate of on-chip dissipated energy for worst-case reprogramming of the whole processor is ~ 65 fJ. Several chips based on this architecture have been fabricated and operated successfully at our facility, as well as two outside facilities (see, for example, the recent reporting by Jones).

arXiv:1401.5504•IEEE Transactions on Applied Superconductivity•Apr 18, 2014•360 citations

Implementation of a Quantum Annealing Algorithm Using a Superconducting Circuit

R. Harris, A. J. Berkley, Johansson, J. +10 more

A circuit consisting of a network of coupled compound Josephson junction rf-SQUID flux qubits has been used to implement an adiabatic quantum optimization algorithm. It is shown that detailed knowledge of the magnitude of the persistent current as a function of annealing parameters is key to implementation of the algorithm on this particular type of hardware. Experimental results contrasting two annealing protocols, one with and one without active compensation for the growth of the qubit persistent current during annealing, are presented in order to illustrate this point.

arXiv:0903.3906•Mar 23, 2009•9 citations

Superconducting quantum circuit of NOR in quantum annealing

Daisuke Saida, Mutsuo Hidaka, Kouhei Miyake +2 more

The applicability of quantum annealing to various problems can be improved by expressing the Hamiltonian using a circuit satisfiability problem. We investigate the detailed characteristics of the NOR/NAND functions of a superconducting quantum circuit, which are the basic building blocks to implementing various types of problem Hamiltonians. The circuit is composed of superconducting flux qubits with all-to-all connectivity, where direct magnetic couplers are utilized instead of the variable couplers in the conventional superconducting quantum circuit. This configuration provides efficient scalability because the problem Hamiltonian is implemented using fewer qubits. We present an experiment with a complete logic operation of NOR/NAND, in which the circuit produces results with a high probability of success for arbitrary combinations of inputs. The features of the quantum circuit agree qualitatively with the theory, especially the mechanism for an operation under external flux modulation. Moreover, by calibrating the bias conditions to compensate for the offset flux from the surrounding circuit, the quantum circuit quantitatively agrees with the theory. To achieve true quantum annealing, we discuss the effects of the reduction in electric noise in quantum annealing.

Scientific Reports•Sep 23, 2022•6 citations
We propose a novel architecture for superconducting circuits to improve the efficiency of a quantum annealing system. To increase the capability of a circuit, it is desirable for a qubit to be coupled not only with adjacent qubits but also with other qubits located far away. We introduce a circuit that uses a lumped element resonator coupled each with one qubit. The resonator-qubit pairs are coupled by rf-superconducting quantum interference device (SQUID) based couplers. These pairs make a large quantum system for quantum annealer. This system could prepare the problem Hamiltonian and tune the parameters for quantum annealing procedure.
We investigate the ultrastrong tunable coupler for coupling of superconducting resonators. The obtained coupling constant exceeds 1 GHz, and the wide-range tunability is achieved for both antiferromagnetics and ferromagnetics from $\ensuremath{-}1086$ to 604 MHz. The ultrastrong coupler is composed of a rf superconducting quantum interference device (SQUID) and dc SQUID as tunable junctions, which connect to resonators via shared aluminum thin-film meander lines enabling such a huge coupling constant. The spectrum of the coupler obviously shows the breaking of the rotating-wave approximation, and our circuit model treating the Josephson junction as a tunable inductance reproduces the experimental results well. The ultrastrong coupler is expected to be utilized in quantum annealing circuits and/or noisy intermediate-scale quantum devices with dense connections between qubits.
The perhaps most promising platform for quantum information processing is the circuit-QED architecture based on superconducting circuits representing quantum bits. These circuits must be made with low losses so that the quantum information is retained for as long as possible. We developed fabrication processes achieving state-of-the-art coherence times of over 100 µs. We identified the primary source of loss to be parasitic two-level systems by studying fluctuations of qubit relaxation times.Using our high-coherence circuits, we implemented a quantum processor built on fixed-frequency qubits and frequency-tunable couplers. The tunable couplers were lumped-element LC resonators, where the inductance came from a superconducting quantum interference device (SQUID). We achieved a controlled-phase gate with a fidelity of 99% by parametric modulation of the coupler frequency. Using this device, and another similar to it, we demonstrated two different quantum algorithms, the quantum approximate optimization algorithm, and density matrix exponentiation. We achieved high algorithmic fidelities, aided by our carefully calibrated gates.Additionally, we researched parametric oscillations using frequency-tunable resonators. Previously, degenerate parametric oscillations have been demonstrated by modulation of the resonant frequency at twice that frequency. We use this phenomenon to implement a readout method for a superconducting qubit with a fidelity of 98.7%. We demonstrated correlated radiation in nondegenerate parametric oscillations by modulating at the sum of two resonant frequencies of a multimode resonator. We showed an excellent quantitative agreement between the classical properties of the oscillations with a theoretical model. Moreover, we studied higher-order modulation at up to five times their resonant frequencies. These types of parametric oscillation states might be used as a quantum resource for continuous-variable quantum computing.
This chapter focuses on the application of Nb Josephson junctions (JJs) in quantum annealing (QA). It begins with a brief introduction to diffident strategies for implementing quantum computation (QC) with an emphasis on quantum annealing. The chapter presents the basic physics of the simplest superconducting flux qubit: radio frequency superconducting quantum interference devices (RF-SQUID). It gives a brief description on the design and realization of couplers, and control and measurement circuitry using Nb Josephson junctions. The chapter describes a scalable architecture upon which quantum annealing processors consisting up to 1024 superconducting flux qubits made of more than 104 Nb Josephson junctions. It discusses evidence on whether D-Wave 2X, which is the latest quantum annealing processor available, works as expected. The chapter also focuses on the physics and application of RF-SQUID flux qubits because the fundamental building blocks of the most advanced quantum annealers demonstrated so far are variations of superconducting flux qubits with one Josephson junction, a.k.a. the RF-SQUID.
We have developed a quantum annealing processor, based on an array of tunable coupled rf-SQUID flux qubits, fabricated in a superconducting integrated circuit process. Implementing this type of processor at a scale of 512 qubits and 1472 programmable interqubit couplers and operating at ~ 20 mK has required attention to a number of considerations that one may ignore at the smaller scale of a few dozen or so devices. Here, we discuss some of these considerations, and the delicate balance necessary for the construction of a practical processor that respects the demanding physical requirements imposed by a quantum algorithm. In particular, we will review some of the design tradeoffs at play in the floor planning of the physical layout, driven by the desire to have an algorithmically useful set of interqubit couplers, and the simultaneous need to embed programmable control circuitry into the processor fabric. In this context, we have developed a new ultralow-power embedded superconducting digital-to-analog flux converter (DAC) used to program the processor with zero static power dissipation, optimized to achieve maximum flux storage density per unit area. The 512 single-stage, 3520 two-stage, and 512 three-stage flux DACs are controlled with an XYZ addressing scheme requiring 56 wires. Our estimate of on-chip dissipated energy for worst-case reprogramming of the whole processor is ~ 65 fJ. Several chips based on this architecture have been fabricated and operated successfully at our facility, as well as two outside facilities (see, for example, the recent reporting by Jones).
A circuit consisting of a network of coupled compound Josephson junction rf-SQUID flux qubits has been used to implement an adiabatic quantum optimization algorithm. It is shown that detailed knowledge of the magnitude of the persistent current as a function of annealing parameters is key to implementation of the algorithm on this particular type of hardware. Experimental results contrasting two annealing protocols, one with and one without active compensation for the growth of the qubit persistent current during annealing, are presented in order to illustrate this point.
The applicability of quantum annealing to various problems can be improved by expressing the Hamiltonian using a circuit satisfiability problem. We investigate the detailed characteristics of the NOR/NAND functions of a superconducting quantum circuit, which are the basic building blocks to implementing various types of problem Hamiltonians. The circuit is composed of superconducting flux qubits with all-to-all connectivity, where direct magnetic couplers are utilized instead of the variable couplers in the conventional superconducting quantum circuit. This configuration provides efficient scalability because the problem Hamiltonian is implemented using fewer qubits. We present an experiment with a complete logic operation of NOR/NAND, in which the circuit produces results with a high probability of success for arbitrary combinations of inputs. The features of the quantum circuit agree qualitatively with the theory, especially the mechanism for an operation under external flux modulation. Moreover, by calibrating the bias conditions to compensate for the offset flux from the surrounding circuit, the quantum circuit quantitatively agrees with the theory. To achieve true quantum annealing, we discuss the effects of the reduction in electric noise in quantum annealing.