We compare a conventional Mach--Zehnder light-pulse atom interferometer based on diffractive mirrors with one that uses specular reflection. In contrast to diffractive mirrors that generate a symmetric configuration, specular mirrors realized, for example, by evanescent fields lead under the influence of gravity to an asymmetric geometry. In such an arrangement the interferometer phase contains nonrelativistic signatures of proper time.
We compare a conventional Mach--Zehnder light-pulse atom interferometer based on diffractive mirrors with one that uses specular reflection. In contrast to diffractive mirrors that generate a symmetric configuration, specular mirrors realized, for example, by evanescent fields lead under the influence of gravity to an asymmetric geometry. In such an arrangement the interferometer phase contains nonrelativistic signatures of proper time.
Light pulses have proven to be a powerful and versatile tool to implement beam splitters and mirrors for matter waves enabling atom interferometers. However, for high-precision measurements with such devices the specific realization is crucial and novel techniques might increase the sensitivity. To illustrate the diversity of light-pulse beam splitting and the subtle differences between the diffraction mechanisms, we study atomic Raman, Bragg, and the new method of double Bragg diffraction in a coherent way. Moreover, we introduce a versatile formalism to determine the interference signal of a Mach-Zehnder geometry and give an interpretation in terms of proper-time difference. In addition, we explore the feasibility of a specular mirror for atoms, which might lead to an interferometer testing the equivalence principle.
Light-pulse atom interferometers serve as tools for high-precision metrology and are targeting measurements of relativistic effects. This development is facilitated by extended interrogation times and large-momentum-transfer techniques generating quantum superpositions of both interferometer arms on large distances. Due to the finite speed of light, diffracting light pulses cannot interact simultaneously with both arms, inducing phase perturbations that compromise the accuracy of the sensor -- an effect that becomes progressively important as spatial separations increase. For a consistent framework, we develop a theory for finite-speed-of-light effects in atom interferometers alongside with other relativistic effects such as the mass defect. Our analysis shows that their magnitude depends crucially on the diffraction mechanism and the specific interferometer geometry. We demonstrate that the velocity of the atomic cloud at the mirror pulse of a Mach-Zehnder interferometer is less critical than the precise tuning of the lasers for resonant diffraction. Finally, we propose an experiment to test our predictions based on recoilless transitions and discuss mitigation strategies to reduce the bias in gravimetric applications.
Interferometers are ubiquitous devices in optics, consisting of arrangements of totally reflective and semitransparent mirrors, fiber optics, detectors, etc . The smallest possible mirror consists of a single atom, and with recent advances in nanotechnology it is possible to fabricate them and couple them to transmission lines. This can be realized for example with superconducting qubits and superconducting coplanar waveguide resonators or with dipole emitters coupled to surface-plasmon nanowires. Based on a recent proposal [G S Paraoanu, Phys. Rev. A 82 , 023802 (2010)], here we give a brief overview of the two-atom Mach-Zender interferometer. Here we show that both the phase and the amplitude of the output field can be used to extract information about the phase difference between the two arms of the interferometer. Also, we point out that this device can be used as well in the reflection mode.
Atom and, more recently, molecule interferometers are used in fundamental research and industrial applications. Most atom interferometers rely on gratings made from laser beams, which can provide high precision, but cannot reach very short wavelengths and require complex laser systems to function. Contrary to this, simple monolithic interferometers cut from single crystals offer (sub) nanometer wavelengths with an extreme level of stability and robustness. Such devices were conceived and demonstrated several decades ago for neutrons and electrons. Here, we propose a monolithic design for a thermal-beam molecule interferometer based on (quantum) reflection. We show, as an example, how a reflective, monolithic interferometer (Mach-Zehnder type) can be realized for a helium beam using $\mathrm{Si}(111)\text{\ensuremath{-}}\mathrm{H}(1\ifmmode\times\else\texttimes\fi{}1)$ surfaces, which have previously been demonstrated to act as very robust and stable diffractive mirrors for neutral helium atoms.
This cumulative thesis consists of four publications [1-4], presented as three contributions (I) - (III), where the second one (II) consists of the joint publications [2,3]. All publications were written during the author's research activities at the Institute of Quantum Physics under the supervision of Prof. Dr. W. P. Schleich. All of the presented publications consider light-matter interactions and their potential application in atom interferometry, a comparatively young and rapidly evolving technique. Atom interferometers find application in high-precision measurements, the determination of physical constants, the testing of fundamental physics, and the provision of gravimeters and gyroscopes. The advancement of technology and science has led to significant improvements in performance and the development of ambitious mobile and space-based devices. The recent success of several experiments has led to the proposal of further experiments with the aim of opening up new frontiers. However, the construction of future devices necessitates a decision regarding the employed diffraction mechanism and geometry, depending on the specific technical and scientific requirements. Furthermore, it is necessary to enhance the sensitivity of future devices. The contributions in this dissertation address these issues. The first contribution (I) focuses on the diffraction of atoms by laser pulses which can be employed to generate atom-optical diffraction elements like beam splitters and mirrors. These diffraction elements can be combined to construct atom interferometers, which have been successfully employed for precision measurements regarding fundamental physics as well as practical applications. The article presents a numerical comparison of two distinct diffraction mechanisms (Bragg and Raman) and diffraction geometries (single and double diffraction) in microgravity. It discusses the fundamental differences between the mechanisms and geometries with respect to the diffraction efficiency, taking into account the width of the initial wave function and the duration of the light pulse. Additionally, it explores the transition between the two diffraction geometries when starting from an atom initially at rest and increasing its momentum. The results may serve as a reference for experimentalists in selecting the most suitable configuration, based on their aims and requirements in the realization of more advanced atom interferometers. The second contribution (II) is a follow-up to the previous one, but focuses exclusively on a single diffraction type in microgravity, namely the so-called double Raman diffraction. In contrast to the previous article, where we only discussed single two-photon processes, we consider in this article a six-photon process, also known as third-order diffraction, as well as three subsequent two-photon processes, which both lead to the same amount of transferred momentum and can both be used to realize large-momentum transfer (LMT). We demonstrate that third-order double Raman diffraction is a viable and advantageous method for the diffraction of small momentum distributions like Bose-Einstein condensates (BECs) compared to a sequence of three two-photon processes. Furthermore, we show that third-order Raman pulses can be successfully applied to create higher-order Raman atom interferometers. Third-order diffraction can be perfectly combined with other LMT techniques and, moreover, allows for a reduction in the overall duration of the diffraction process and the complexity of the experimental set-up, as only two distinct laser frequencies are required. Moreover, we present a third-order Mach-Zehnder interferometer with spurious paths being disregarded. As demonstrated later on in [3], this interferometer generates optimal contrast and a substantial amplitude. The third contribution (III) extends the semi-classical λ-scheme of single Raman diffraction, as discussed in detail in contribution (I), into a fully quantized multi-atom multi-λ configuration with center-of-mass motion inside a cavity. Therefore, the incorporation of an internal structure allows for a more realistic modeling of the atoms, which is relevant for multi-photon interaction or cooling processes. We use for our analysis the framework of second quantization, i.e., we take into account the field-theoretical nature of the multi-particle atomic field as well as of the diffracting light field. We reduce this model with a Hamiltonian averaging theory applied to the atomic field operators and obtain an effective Hamiltonian, which determines the time evolution of the system. We demonstrate the efficiency of our model by the application of a typical initial state. Moreover, for a specific input state, we obtain the Hong-Ou-Mandel effect simultaneously in the atomic and the optical system. Our many-body formalism is perfectly suited to theoretically describe contemporary high-precision atom interferometric experiments based on entanglement between the atoms, that aim to surpass the shot-noise limit.
The far-field patterns of atoms diffracted from a classical light field or from a quantum one in a photon-number state are identical. On the other hand, diffraction from a field in a coherent state, which shares many properties with classical light, displays a completely different behavior. We show that in contrast to the diffraction patterns, the interference signal of an atom interferometer with light-pulse beam splitters and mirrors in intense coherent states does approach the limit of classical fields. However, low photon numbers reveal the granular structure of light, leading to a reduced visibility since welcher-Weg (which-way) information is encoded into the field. We discuss this effect for a single photon-number state as well as a superposition of two such states.