Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1901.08035 · Physical Review A

Demonstration of a parametrically activated entangling gate protected from flux noise

Sabrina Hong, Alexander T. Papageorge, Prasahnt Sivarajah, Genya Crossman, Nicolas Didier, Anthony Polloreno, Eyob Alebachew Sete, Stefan Turkowski, Marcus Palmer Da Silva, Blake Johnson

Published Jan 6, 2020• 76 citations
arXivHTMLPDF

Abstract

In state-of-the-art quantum computing platforms, including superconducting qubits and trapped ions, imperfections in the two-qubit entangling gates are the dominant contributions of error to systemwide performance. Recently, a novel two-qubit parametric gate was proposed and demonstrated with superconducting transmon qubits. This gate is activated through rf modulation of the transmon frequency and can be operated at an amplitude where the performance is first-order insensitive to flux noise. In this work we experimentally validate the existence of this ac sweet spot and demonstrate its dependence on white-noise power from room-temperature electronics. With these factors in place, we observe entangling-gate fidelity with coherence-limited performance. An ensemble of repeated observations has a median fidelity of 98.8%, with roughly 10% of observations above 99%.

DOI
10.1103/physreva.101.012302

Related papers

ac Flux Sweet Spots in Parametrically Modulated Superconducting Qubits

Nicolas Didier, Eyob A. Sete, Joshua Combes +1 more

The control of highly coherent qubits is crucial to building scalable superconducting quantum processors; in particular, the performance of entangling gates relies on the coherence times of individual qubits. Parametrically activated entangling gates between two coupled qubits are realized through rf flux modulation of one qubit. Here the authors discuss modulation amplitudes at which the qubit is first-order insensitive to $1/f$ flux noise: ``sweet spots'' in the ac flux. By properly filtering the white flux noise from the control electronics, one can realize high-fidelity two-qubit gates at a sweet spot. Recently this protection from flux noise has also been seen experimentally.

arXiv:1807.01310•Physical Review Applied•Nov 7, 2019•45 citations

Assessing the Influence of Broadband Instrumentation Noise on Parametrically Modulated Superconducting Qubits

Eliot Fried, Prasahnt Sivarajah, Nicolas Didier +4 more

With superconducting transmon qubits --- a promising platform for quantum information processing --- two-qubit gates can be performed using AC signals to modulate a tunable transmon's frequency via magnetic flux through its SQUID loop. However, frequency tunablity introduces an additional dephasing mechanism from magnetic fluctuations. In this work, we experimentally study the contribution of instrumentation noise to flux instability and the resulting error rate of parametrically activated two-qubit gates. Specifically, we measure the qubit coherence time under flux modulation while injecting broadband noise through the flux control channel. We model the noise's effect using a dephasing rate model that matches well to the measured rates, and use it to prescribe a noise floor required to achieve a desired two-qubit gate infidelity. Finally, we demonstrate that low-pass filtering the AC signal used to drive two-qubit gates between the first and second harmonic frequencies can reduce qubit sensitivity to flux noise at the AC sweet spot (ACSS), confirming an earlier theoretical prediction. The framework we present to determine instrumentation noise floors required for high entangling two-qubit gate fidelity should be extensible to other quantum information processing systems.

arXiv:1908.11370•Aug 29, 2019•2 citations

Flux control of superconducting qubits at dynamical sweet spots

Nicolas Didier

Scaling up superconducting quantum processors with optimized performance requires a sufficient flexibility in the choice of operating points for single and two qubit gates to maximize their fidelity and cope with imperfections. Flux control is an efficient technique to manipulate the parameters of tunable qubits, in particular to activate entangling gates. At flux sensitive points of operation, the ubiquitous presence of 1/f flux noise however gives rise to dephasing by inducing fluctuations of the qubit frequency. We show how two-tone modulation of the flux bias, a bichromatic modulation, gives rise to a continuum of dynamical sweet spots where dephasing due to slow flux noise is suppressed to first order for a wide range of time-averaged qubit frequencies. The qubits can be operated at these dynamical sweet spots to realize protected entangling gates and to avoid collisions with two-level-system defects.

arXiv:1912.09416•Dec 19, 2019•7 citations

Parametrically Activated Entangling Gates Using Transmon Qubits

Sam Caldwell, Nicolas Didier, Colm A. Ryan +59 more

A central challenge in building a scalable quantum computer with superconducting qubits is the execution of high-fidelity two-qubit gates in the presence of many resonant elements. As more elements are added to the architecture, and as the multiplicity of their couplings grows, the design's frequency space becomes crowded, and performance suffers. The authors present a way to address this difficulty: selective activation of interactions between transmon qubits of fixed frequency and those of tunable frequency. This activation depends on both the amplitude and frequency of modulation, and using the amplitude as an additional condition for resonance alleviates frequency crowding.

arXiv:1706.06562•Physical Review Applied•Sep 24, 2018•206 citations

High-fidelity and robust controlled-Z gates for superconducting transmon qubits. I. Intrinsic errors and decoherence

Chia-Hsien Huang, Hsi-Sheng Goan

Fault-tolerant quantum computing requires quantum gates that combine short duration, high fidelity, and robustness to noise. As quantum processors scale, robustness becomes increasingly important because exhaustive characterization and frequent recalibration of individual gates become impractical. We present a comprehensive optimal-control framework for controlled-Z (CZ) gates between directly coupled, frequency-tunable transmons that systematically accounts for intrinsic Hamiltonian errors and realistic decoherence mechanisms, including energy relaxation and dephasing. Using smooth, single-shot flux pulses, we obtain 12-ns CZ gates---close to the theoretical speed limit of 11.6 ns---with intrinsic errors suppressed to the $2\times10^{-5}$ level. We construct dephasing noise models, calibrated against published experimental measurements, that capture fast dephasing from room-temperature control electronics and slow dephasing from $1/f$ flux noise. Using these models, we identify dephasing sweet spots that suppress sensitivity to dephasing noise. We further exploit transmon asymmetry as a design parameter to access distinct noise-resilient operating regimes. These results establish an experimentally applicable framework for balancing gate speed, fidelity, and noise robustness while reducing characterization and recalibration overhead.

quant-pharXiv:2610.30056•Oct 22, 2026•0 citations

Dynamical Sweet Spot Engineering via Two-Tone Flux Modulation of Superconducting Qubits

Joseph A. Valery, Shoumik Chowdhury, Glenn Jones +1 more

Current superconducting quantum processors require strategies for coping with material defects and imperfect parameter targeting in order to scale up while maintaining high performance.To that end, in situ control of qubit frequencies with magnetic flux can be used to avoid spurious resonances.However, increased dephasing due to 1/f flux noise limits performance at all of these operating points except for noise-protected sweet spots, which are sparse under dc flux bias and monochromatic flux modulation.Here we experimentally demonstrate that two-tone flux modulation can be used to create a continuum of dynamical sweet spots, greatly expanding the range of qubit frequencies achievable while first-order insensitive to slow flux noise.To illustrate some advantages of this flexibility, we use bichromatic flux control to reduce the error rates and gate times of parametric entangling operations between transmons.Independent of the gate scheme, the ability to use flux control to freely select qubit frequencies while maintaining qubit coherence represents an important step forward in the robustness and scalability of near-term superconducting qubit devices.

arXiv:2104.07835•PRX Quantum•May 18, 2022•30 citations
In state-of-the-art quantum computing platforms, including superconducting qubits and trapped ions, imperfections in the two-qubit entangling gates are the dominant contributions of error to systemwide performance. Recently, a novel two-qubit parametric gate was proposed and demonstrated with superconducting transmon qubits. This gate is activated through rf modulation of the transmon frequency and can be operated at an amplitude where the performance is first-order insensitive to flux noise. In this work we experimentally validate the existence of this ac sweet spot and demonstrate its dependence on white-noise power from room-temperature electronics. With these factors in place, we observe entangling-gate fidelity with coherence-limited performance. An ensemble of repeated observations has a median fidelity of 98.8%, with roughly 10% of observations above 99%.
The control of highly coherent qubits is crucial to building scalable superconducting quantum processors; in particular, the performance of entangling gates relies on the coherence times of individual qubits. Parametrically activated entangling gates between two coupled qubits are realized through rf flux modulation of one qubit. Here the authors discuss modulation amplitudes at which the qubit is first-order insensitive to 1/f1/f1/f flux noise: ``sweet spots'' in the ac flux. By properly filtering the white flux noise from the control electronics, one can realize high-fidelity two-qubit gates at a sweet spot. Recently this protection from flux noise has also been seen experimentally.
With superconducting transmon qubits --- a promising platform for quantum information processing --- two-qubit gates can be performed using AC signals to modulate a tunable transmon's frequency via magnetic flux through its SQUID loop. However, frequency tunablity introduces an additional dephasing mechanism from magnetic fluctuations. In this work, we experimentally study the contribution of instrumentation noise to flux instability and the resulting error rate of parametrically activated two-qubit gates. Specifically, we measure the qubit coherence time under flux modulation while injecting broadband noise through the flux control channel. We model the noise's effect using a dephasing rate model that matches well to the measured rates, and use it to prescribe a noise floor required to achieve a desired two-qubit gate infidelity. Finally, we demonstrate that low-pass filtering the AC signal used to drive two-qubit gates between the first and second harmonic frequencies can reduce qubit sensitivity to flux noise at the AC sweet spot (ACSS), confirming an earlier theoretical prediction. The framework we present to determine instrumentation noise floors required for high entangling two-qubit gate fidelity should be extensible to other quantum information processing systems.
Scaling up superconducting quantum processors with optimized performance requires a sufficient flexibility in the choice of operating points for single and two qubit gates to maximize their fidelity and cope with imperfections. Flux control is an efficient technique to manipulate the parameters of tunable qubits, in particular to activate entangling gates. At flux sensitive points of operation, the ubiquitous presence of 1/f flux noise however gives rise to dephasing by inducing fluctuations of the qubit frequency. We show how two-tone modulation of the flux bias, a bichromatic modulation, gives rise to a continuum of dynamical sweet spots where dephasing due to slow flux noise is suppressed to first order for a wide range of time-averaged qubit frequencies. The qubits can be operated at these dynamical sweet spots to realize protected entangling gates and to avoid collisions with two-level-system defects.
A central challenge in building a scalable quantum computer with superconducting qubits is the execution of high-fidelity two-qubit gates in the presence of many resonant elements. As more elements are added to the architecture, and as the multiplicity of their couplings grows, the design's frequency space becomes crowded, and performance suffers. The authors present a way to address this difficulty: selective activation of interactions between transmon qubits of fixed frequency and those of tunable frequency. This activation depends on both the amplitude and frequency of modulation, and using the amplitude as an additional condition for resonance alleviates frequency crowding.
Fault-tolerant quantum computing requires quantum gates that combine short duration, high fidelity, and robustness to noise. As quantum processors scale, robustness becomes increasingly important because exhaustive characterization and frequent recalibration of individual gates become impractical. We present a comprehensive optimal-control framework for controlled-Z (CZ) gates between directly coupled, frequency-tunable transmons that systematically accounts for intrinsic Hamiltonian errors and realistic decoherence mechanisms, including energy relaxation and dephasing. Using smooth, single-shot flux pulses, we obtain 12-ns CZ gates---close to the theoretical speed limit of 11.6 ns---with intrinsic errors suppressed to the 2×10−52\times10^{-5}2×10−5 level. We construct dephasing noise models, calibrated against published experimental measurements, that capture fast dephasing from room-temperature control electronics and slow dephasing from 1/f1/f1/f flux noise. Using these models, we identify dephasing sweet spots that suppress sensitivity to dephasing noise. We further exploit transmon asymmetry as a design parameter to access distinct noise-resilient operating regimes. These results establish an experimentally applicable framework for balancing gate speed, fidelity, and noise robustness while reducing characterization and recalibration overhead.
Current superconducting quantum processors require strategies for coping with material defects and imperfect parameter targeting in order to scale up while maintaining high performance.To that end, in situ control of qubit frequencies with magnetic flux can be used to avoid spurious resonances.However, increased dephasing due to 1/f flux noise limits performance at all of these operating points except for noise-protected sweet spots, which are sparse under dc flux bias and monochromatic flux modulation.Here we experimentally demonstrate that two-tone flux modulation can be used to create a continuum of dynamical sweet spots, greatly expanding the range of qubit frequencies achievable while first-order insensitive to slow flux noise.To illustrate some advantages of this flexibility, we use bichromatic flux control to reduce the error rates and gate times of parametric entangling operations between transmons.Independent of the gate scheme, the ability to use flux control to freely select qubit frequencies while maintaining qubit coherence represents an important step forward in the robustness and scalability of near-term superconducting qubit devices.