As the minituarization of electronic devices, which are sensitive to temperature, grows apace, sensing of temperature with ever smaller probes is more important than ever. Genuinely quantum mechanical schemes of thermometry are thus expected to be crucial to future technological progress. We propose an alternative method to measure the temperature of a bath using the weak measurement scheme with a finite-dimensional probe. The precision offered by the present scheme not only shows similar qualitative features as the usual quantum-Fisher-information-based thermometric protocols, but also allows for flexibility over setting the optimal thermometric window through the judicious choice of postselection measurements.
As the minituarization of electronic devices, which are sensitive to temperature, grows apace, sensing of temperature with ever smaller probes is more important than ever. Genuinely quantum mechanical schemes of thermometry are thus expected to be crucial to future technological progress. We propose an alternative method to measure the temperature of a bath using the weak measurement scheme with a finite-dimensional probe. The precision offered by the present scheme not only shows similar qualitative features as the usual quantum-Fisher-information-based thermometric protocols, but also allows for flexibility over setting the optimal thermometric window through the judicious choice of postselection measurements.
Abstract Controlling and measuring the temperature in different devices and platforms that operate in the quantum regime is, without any doubt, essential for any potential application. In this review, we report the most recent theoretical developments dealing with accurate estimation of very low temperatures in quantum systems. Together with the emerging experimental techniques and developments of measurement protocols, the theory of quantum thermometry will decisively impinge and shape the forthcoming quantum technologies. While current quantum thermometric methods differ greatly depending on the experimental platform, the achievable precision, and the temperature range of interest, the theory of quantum thermometry is built under a unifying framework at the crossroads of quantum metrology, open quantum systems, and quantum many-body physics. At a fundamental level, theoretical quantum thermometry is concerned with finding the ultimate bounds and scaling laws that limit the precision of temperature estimation for systems in and out of thermal equilibrium. At a more practical level, it provides tools to formulate precise, yet feasible, thermometric protocols for relevant experimental architectures. Last but not least, the theory of quantum thermometry examines genuine quantum features, like entanglement and coherence, for their exploitation in enhanced-resolution thermometry.
We develop a general perturbative theory of finite-coupling quantum thermometry up to second order in probe-sample interaction. By assumption, the probe and sample are in thermal equilibrium, so the probe is described by the mean-force Gibbs state. We prove that the ultimate thermometric precision can be achieved – to second order in the coupling – solely by means of local energy measurements on the probe. Hence, seeking to extract temperature information from coherences or devising adaptive schemes confers no practical advantage in this regime. Additionally, we provide a closed-form expression for the quantum Fisher information, which captures the probe's sensitivity to temperature variations. Finally, we benchmark and illustrate the ease of use of our formulas with two simple examples. Our formalism makes no assumptions about separation of dynamical timescales or the nature of either the probe or the sample. Therefore, by providing analytical insight into both the thermal sensitivity and the optimal measurement for achieving it, our results pave the way for quantum thermometry in setups where finite-coupling effects cannot be ignored.
The precise measurement of low temperatures is significant for both the fundamental understanding of physical processes and technological applications. In this work, we present a method for low-temperature measurement that improves thermal range and sensitivity by generating quantum coherence in a thermometer probe. Typically, in temperature measurements, the probes thermalize with the sample being measured. However, we use a two-level quantum system, or qubit, as our probe and prevent direct probe access to the sample by introducing a set of ancilla qubits as an interface. We describe the open system dynamics of the probe using a global master equation and demonstrate that while the ancilla-probe system thermalizes with the sample, the probe per se evolves into a nonthermal steady state due to nonlocal dissipation channels. The populations and coherences of this steady state depend on the sample temperature, allowing for precise and wide-range low-temperature estimation. We characterize the thermometric performance of the method using quantum Fisher information and show that the quantum Fisher information can exhibit multiple and higher peaks at different low temperatures with increasing quantum coherence and the number of ancilla qubits. Our analysis reveals that the proposed approach, using a nonthermal qubit thermometer probe with temperature-dependent quantum coherence generated by a multiple qubit interface between a thermal sample and the probe qubit, can enhance the sensitivity of temperature estimation and broaden the measurable low-temperature range.
Measuring the temperature of a quantum system is an essential task in almost all aspects of quantum technologies. Theoretically, an optimal strategy for thermometry requires measuring energy which demands full accessibility over the entire system as well as complex entangled measurement basis. In this paper, we take a different approach and show that single qubit sequential measurements in the computational basis not only allows precise thermometry of a many-body system but may also achieve precision beyond the theoretical bound, avoiding demanding energy measurements at equilibrium. To obtain such precision, the time between the two subsequent measurements should be smaller than the thermalization time so that the probe never thermalizes. Therefore, the non-equilibrium dynamics of the system continuously imprint information about temperature in the state of the probe. This allows the sequential measurement scheme to reach precision beyond the accuracy achievable by complex energy measurements on equilibrium probes.
Quantum thermometry has long promised sensitivities beyond classical limits, with recent paradigms highlighting quantum coherence as a primary driver of precision. While most studies focus on single-point temperature estimation, we extend this framework to the spatial domain. We consider a probe two-level system (TLS) coupled asymmetrically to an auxiliary TLS that equilibrates with a sample of profile T(x). The reduced probe state carries coherence in its local basis that remains temperature-sensitive after the probe transition has frozen out, yielding a Fisher information exponentially larger at low temperature than that of a population-only readout. An exact reparametrization converts the thermometric precision into a local spatial distinguishability bound; its validity requires only a sufficiently small relative temperature uncertainty and yields an explicit measurement budget. Adding auxiliary TLSs shifts the array's optimal working temperature upward and broadens the useful sensing window, with the achievable gain ultimately limited by the total available coupling rather than by an indefinite scaling law. Finally, we propose a microwave Mach-Zehnder interferometer that maps the temperature-dependent probe coherence onto an experimentally accessible quadrature observable.
Abstract In the field of quantum thermometry, usually temperature is estimated by the framework of quantum metrology. In this work, an alternative approach to quantum thermometry is suggested, based on interferometric power (IP). IP is defined as the worst-case quantum Fisher information in a double-channel interferometer. Specifically, the time evolution of the IP for a two-qubit state as a probe contacting with a finite-temperature bath is considered. The IP dynamics of the probe with three kinds of initial states ( i.e. , entangled, separable, and mixed) strongly depend on the bath temperature. The dynamical evolution of IP would be measured experimentally, considering that the IP is a measurable quantity in the experiment. Thus, the IP dynamics can be adopted to extract the value of the bath temperature directly. In this sense, the IP could be exploited as a quantum thermometer.