Development of resource-friendly quantum algorithms remains highly desirable for noisy intermediate-scale quantum computing. Based on the variational quantum eigensolver (VQE) with unitary coupled-cluster Ansatz, we demonstrate that partitioning of the Hilbert space made possible by the point-group symmetry of the molecular systems greatly reduces the number of variational operators by confining the variational search within a subspace. In addition, we found that instead of including all subterms for each excitation operator, a single-term representation suffices to reach required accuracy for various molecules tested, resulting in an additional shortening of the quantum circuit by a factor of 4–8. With these strategies, VQE calculations on a noise-free quantum simulator achieve energies within a few meVs of those obtained with the full unitary coupled-cluster Ansatz with single and double excitations for the H4-square, H4-chain, and H6-hexagon molecules, while the number of cnot gates, a measure of the quantum-circuit depth, is reduced by a factor of as large as 35. Furthermore, we introduced an efficient “score” parameter to rank the excitation operators, so that the operators causing larger energy reduction can be applied first. Using the H4 square and H4 chain as examples, We demonstrated on noisy quantum simulators that the first few variational operators can bring the energy within the chemical accuracy, while additional operators do not improve the energy since the accumulative noise outweighs the gain from the expansion of the variational Ansatz.
High Resolution Image Download MS PowerPoint Slide Quantum computers have the potential to efficiently solve the electronic structure problem but are currently limited by noise and shallow circuits. We present an enhanced Variational Quantum Eigensolver (VQE) ansatz based on the Qubit Coupled Cluster (QCC) approach that requires optimization of only n parameters, where n is the number of Pauli string generators, rather than the typical n + 2 m parameters, where m is the number of qubits. We evaluate the ground state energies and molecular dissociation curves of strongly correlated molecules, namely O 3 and Li 4, using active spaces of varying sizes in conjunction with our enhanced QCC ansatz, Unitary Coupled Cluster Single–Double (UCCSD) ansatz, and the classical Coupled Cluster Singles and Doubles (CCSD) method. Compared to UCCSD, our approach significantly reduces the number of parameters while maintaining high accuracy. Numerical simulations demonstrate the effectiveness of our approach, and experiments on superconducting and trapped-ion quantum computers showcase its practicality on real hardware. By eliminating the need for symmetry-restoring gates and reducing the number of parameters, our enhanced QCC ansatz enables accurate quantum chemistry calculations on near-term quantum devices for strongly correlated systems.
One of the first practical applications of quantum computers is expected to be molecular modelling. Performing this task would profoundly affect areas such as chemistry, materials science and drug synthesis. Modelling of molecules, which are classically intractable, can be achieved with just over
30 qubits, whereas state of the art quantum computers already have more than
50 qubits. The Variational Quantum Eigensolver (VQE) algorithm and VQE based protocols, are promising candidates to enable this task on emerging Noisy Intermediate-Scale Quantum (NISQ) computers. These protocols require short quantum circuits and short coherence times, and are particularly resilient to quantum errors. Nevertheless, there is still a significant gap between the accuracy and the coherence times of current NISQ computers, and the hardware requirements of VQE protocols to simulate practically interesting molecules. In this thesis, I present my contribution to narrowing this gap by developing VQE protocols for molecular modelling that are less demanding on quantum hardware. The VQE relies on the Rayleigh-Ritz variational principle to estimate the eigenvalues of a Hamiltonian operator, by minimizing its expectation value with respect to a trial quantum state, prepared by an ansatz. A major challenge for the practical realisation of VQE protocols on NISQ computers is to construct an ansatz that: (1) can accurately approximate the eigenstates of the Hamiltonian; (2) is easy to optimize; and (3) can be implemented by a shallow circuit, within the capabilities of a NISQ computer. The most widely used, unitary coupled cluster (UCC), type of ans\"atze mathematically correspond to a product of unitary evolutions of fermionic excitation operators. Owing to their fermionic structure, UCC ans\"atze preserve the symmetries of electronic wavefunctions, and thus are accurate and easy to optimize. Nevertheless, UCC ans\"atze are implemented by high depth circuits, which severely limit the size of the molecules that can be reliably simulated on NISQ computers. In this thesis, I begin by constructing efficient quantum circuits to perform evolutions of fermionic excitation operators. The circuits are optimized in the number of two-qubit entangling gates, which are the current bottleneck of NISQ computers. Compared to the standard circuits used to implement evolutions of fermionic excitation operators, the circuits derived in this thesis reduce the number of two-qubit entangling gates by more than
70% on average. As an intermediate result, I also derive efficient circuits to perform evolutions of qubit excitation operators (excitation operators that account for qubit, rather than fermionic commutation relations). Even with the fermionic-excitation-evolution circuits derived here, UCC ans\"atze still require very long circuits, with a particularly large number of two-qubit entangling gates. In this thesis, I consider the use of alternative VQE ans\"atze, based on evolutions of qubit excitation operators. Due to not accounting for fermionic anticommutation, evolutions of qubit excitation operators can be performed by circuits that require asymptotically fewer two-qubit entangling gates. Furthermore, qubit excitation operators preserve many of the physical properties of fermionic excitation operators. Performing a number of classical numerical VQE simulations for small molecules, I show that qubit-excitation-based ans\"atze can approximate molecular electronic wavefunctions almost as accurately as fermionic-excitation-based ans\"atze. Hence, I argue that evolutions of qubit excitation operators are more suitable to construct molecular ans\"atze than evolutions of fermionic excitation operators, especially in the era of NISQ computers. Motivated by the advantage of qubit-excitation-based ans\"atze, I introduce the qubit-excitation-based adaptive variational quantum eigensolver (QEB-ADAPT-VQE). The QEB-ADAPT-VQE belongs to a family of ADAPT-VQE protocols for molecular modelling that grow a problem-tailored ansatz by iteratively appending unitary operators sampled from a predefined finite-size pool of operators. The operator at each iteration is sampled based on an ansatz-growing strategy, which aims to achieve the lowest estimate for the Hamiltonian expectation value at each iteration. In this way, ADAPT-VQE protocols construct shallow-circuit, few-parameter ans\"atze tailored specifically to the molecular systems of interest. In the case of the QEB-ADAPT-VQE, the operator pool is defined by a set of evolutions of single and double qubit excitation operators. I benchmark the performance of the QEB-ADAPT-VQE, by performing classical numerical simulations. I demonstrate that it can construct ans\"atze that are several orders of magnitude more accurate, and require significantly shallower circuits, than standard UCC ans\"atze. I also compare the QEB-ADAPT-VQE against the original fermionic-ADAPT-VQE, which utilizes a pool of fermionic excitation evolutions, and the qubit-ADAPT-VQE, which utilizes a pool of Pauli-string evolutions. I demonstrate that, in terms of circuit efficiency and convergence speed, the QEB-ADAPT-VQE systematically outperforms the qubit-ADAPT-VQE, which to my knowledge was the previous most circuit-efficient, scalable VQE protocol for molecular modeling. The QEB-ADAPT-VQE protocol, therefore represents a significant improvement in the field of VQE protocols for molecular modelling and brings us closer to achieving practical quantum advantage. Lastly, I outline a modified version of the QEB-ADAPT-VQE, the excited-QEB-ADAPT-VQE, designed to estimate energies of excited molecular states. The excited-QEB-ADAPT-VQE is more robust to initial simulation conditions, at the expense of increased computational complexity.
Variational algorithms for strongly correlated chemical and materials systems are one of the most promising applications of near-term quantum computers. We present an extension to the variational quantum eigensolver that approximates the ground state of a system by solving a generalized eigenvalue problem in a subspace spanned by a collection of parametrized quantum states. This allows for the systematic improvement of a logical wavefunction ansatz without a significant increase in circuit complexity. To minimize the circuit complexity of this approach, we propose a strategy for efficiently measuring the Hamiltonian and overlap matrix elements between states parametrized by circuits that commute with the total particle number operator. This strategy doubles the size of the state preparation circuits but not their depth, while adding a small number of additional two-qubit gates relative to standard variational quantum eigensolver. We also propose a classical Monte Carlo scheme to estimate the uncertainty in the ground state energy caused by a finite number of measurements of the matrix elements. We explain how this Monte Carlo procedure can be extended to adaptively schedule the required measurements, reducing the number of circuit executions necessary for a given accuracy. We apply these ideas to two model strongly correlated systems, a square configuration of H 4 and the π -system of hexatriene (C 6 H 8 ).
Variational algorithms for strongly correlated chemical and materials systems are one of the most promising applications of near-term quantum computers. We present an extension to the variational quantum eigensolver that approximates the ground state of a system by solving a generalized eigenvalue problem in a subspace spanned by a collection of parametrized quantum states. This allows for the systematic improvement of a logical wavefunction ansatz without a significant increase in circuit complexity. To minimize the circuit complexity of this approach, we propose a strategy for efficiently measuring the Hamiltonian and overlap matrix elements between states parametrized by circuits that commute with the total particle number operator. This strategy doubles the size of the state preparation circuits but not their depth, while adding a small number of additional two-qubit gates relative to standard variational quantum eigensolver. We also propose a classical Monte Carlo scheme to estimate the uncertainty in the ground state energy caused by a finite number of measurements of the matrix elements. We explain how this Monte Carlo procedure can be extended to adaptively schedule the required measurements, reducing the number of circuit executions necessary for a given accuracy. We apply these ideas to two model strongly correlated systems, a square configuration of H4 and the π-system of hexatriene (C6H8).
We present a self-consistent field (SCF) approach within the adaptive derivative-assembled problem-tailored ansatz variational quantum eigensolver (ADAPT-VQE) framework for efficient quantum simulations of chemical systems on near-term quantum computers. To this end, our ADAPT-VQE-SCF approach combines the idea of generating an ansatz with a small number of parameters, resulting in shallow-depth quantum circuits with a direct minimization of an energy expression that is correct to second order with respect to changes in the molecular orbital basis. Our numerical analysis, including calculations for the transition-metal complex ferrocene [Fe (C 5 H 5 ) 2 ], indicates that convergence in the self-consistent orbital optimization loop can be reached without a considerable increase in the number of two-qubit gates in the quantum circuit by comparison to a VQE optimization in the initial molecular orbital basis. Moreover, the orbital optimization can be carried out simultaneously within each iteration of the ADAPT-VQE cycle. ADAPT-VQE-SCF thus allows us to implement a routine analogous to the complete active space SCF, a cornerstone of state-of-the-art computational chemistry, in a hardware-efficient manner on near-term quantum computers. Hence, ADAPT-VQE-SCF paves the way toward a paradigm shift for quantitative quantum-chemistry simulations on quantum computers by requiring fewer qubits and opening up for the use of large and flexible atomic orbital basis sets in contrast to earlier methods that are predominantly based on the idea of full active spaces with minimal basis sets.