A theoretical scheme is proposed to enhance the signal-to-noise ratio in ultrasensitive detection by quantum correlation in a composite optomechanical system. Introducing an auxiliary oscillator and treating it as an added probe for weak-field detection, the additional noise can be greatly suppressed, which may even break the standard quantum limit. A magnetic field is employed as an example to exhibit the detection capability of the scheme. The result shows that, compared with the traditional detection protocol, the scheme has a higher signal-to-noise ratio and a better detection accuracy. Furthermore, the signal intensity detection curve shows a good linearity. The results provide a promising platform for reducing the additional noise by utilizing quantum correlation in ultrasensitive detection.
A theoretical scheme is proposed to enhance the signal-to-noise ratio in ultrasensitive detection by quantum correlation in a composite optomechanical system. Introducing an auxiliary oscillator and treating it as an added probe for weak-field detection, the additional noise can be greatly suppressed, which may even break the standard quantum limit. A magnetic field is employed as an example to exhibit the detection capability of the scheme. The result shows that, compared with the traditional detection protocol, the scheme has a higher signal-to-noise ratio and a better detection accuracy. Furthermore, the signal intensity detection curve shows a good linearity. The results provide a promising platform for reducing the additional noise by utilizing quantum correlation in ultrasensitive detection.
Quantum squeezing-assisted noise suppression is a promising field with wide applications. However, the limit of noise suppression induced by squeezing is still unknown. This paper discusses this issue by studying weak signal detection in an optomechanical system. By solving the system dynamics in the frequency domain, we analyze the output spectrum of the optical signal. The results show that the intensity of the noise depends on many factors, including the degree or direction of squeezing and the choice of the detection scheme. To measure the effectiveness of squeezing and to obtain the optimal squeezing value for a given set of parameters, we define an optimization factor. With the help of this definition, we find the optimal noise suppression scheme, which can only be achieved when the detection direction exactly matches the squeezing direction. The latter is not easy to adjust as it is susceptible to changes in dynamic evolution and sensitive to parameters. In addition, we find that the additional noise reaches a minimum when the cavity (mechanical) dissipation κ(γ) satisfies the relation κ = Nγ, which can be understood as the restrictive relationship between the two dissipation channels induced by the uncertainty relation. Furthermore, by taking into account the noise source of our system, we can realize high-level noise suppression without reducing the input signal, which means that the signal-to-noise ratio can be further improved.
Abstract A scheme of backaction evading and amplification of weak force signal is presented in an optomechanical system. By introducing the frequency modulation of the cavity field, the system can achieve the quantum nondemolition measurement interaction so that the backaction evading can be reached. With the help of the mechanical squeezing, the weak force signal can be amplified, which equals to amplifying the mechanical response function, reducing additional noise as well as thermal noise of mechanical oscillator. The current scheme opens up an alternative method for simultaneously surpassing the standard quantum limit and enhancing the mechanical response, and also reducing the mechanical thermal noise.
Abstract A theoretical scheme is proposed to enhance the sensitivity of force sensors with quantum non-demolition measurement (QND) in an optomechanical setup assisted by four-tone optical driving and an optical parametric amplifier (OPA). With the help of special drive, the system can be simplified as the typical type of QND for force sensing, so that the backaction noise can be evaded to surpass the standard quantum limit. Besides, the added noise can be suppressed owing to the modified optical susceptibility resulting from the OPA. By introducing two oscillators coupling with two charged bodies respectively, the signal can be enhanced with the nonlinearity caused by Coulomb interaction, while the noise presents an exponential decrease. Moreover, considering the homodyne detection effect, the range of system parameters and frequency bands will be broadened. The present investigation may provide a route toward simultaneously evading backaction noise, reducing the mechanical thermal noise, and enhancing the external signal, which can be an alternative design for sensitive devices.
We propose an ultrasensitive displacement measurement scheme to overcome the standard quantum limit (SQL) in the unresolved sideband cavity optomechanical system with nonlinear optomechanical coupling and squeezed light injection. By introducing the optimized quantum correlation, which is enabled by suitable choices of the squeezing angle, squeezing level, power of the probe light, and measurement angle of homodyne detection, the off-resonant displacement sensitivity reaches 6 dB below the SQL in linear optomechanical coupling. In contrast, displacement sensitivities with a coherent probe plus variational readout and squeezed probe plus fixed measurement angle (phase quadrature) are 2.6 dB and 4.6 dB below the SQL, respectively. By combining linear and quadratic optomechanical coupling, we show that the displacement sensitivity can be further improved to 9.6 dB below the SQL. Our results have potential applications in gravitational-wave detectors, quantum metrology, and the search for dark matter.
We investigate the reduction of measurement-added noise in force sensing by analyzing its power spectral density (PSD) within a hybrid optomechanical system. The setup comprises of an optomechanical cavity equipped with a movable mirror which acts as the mechanical oscillator, a stationary semi-transparent mirror, a superconducting qubit, and an optical parametric amplifier (OPA). By utilizing the concept of coherent quantum noise cancellation (CQNC), we derive the conditions necessary for complete cancellation of back-action force, thereby enhancing force sensitivity. Furthermore, with the gradual increase in the OPA pump gains, we suppress the sensitivity beyond the standard quantum limit (SQL) at a lower value of laser power. The removal of back-action noise, along with the reduction of shot noise, improves force detection capabilities, thereby surpassing the standard quantum limit associated with weak force detection.
We investigate the reduction of measurement-added noise in force sensing by analyzing its power spectral density (PSD) within a hybrid optomechanical system. The setup is comprised of an optomechanical cavity equipped with a movable mirror which acts as the mechanical oscillator, a stationary semi-transparent mirror, a superconducting qubit, and an optical parametric amplifier (OPA). By utilizing the concept of coherent quantum noise cancellation (CQNC), we derive the conditions necessary for complete cancellation of back-action force, thereby enhancing force sensitivity. Furthermore, with the gradual increase in the OPA pump gains, we suppress the sensitivity beyond the standard quantum limit (SQL) at a lower value of laser power. The removal of back-action noise, along with the reduction of shot noise, improves force detection capabilities, thereby surpassing the standard quantum limit associated with weak force detection.