Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1811.07921 · New Journal of Physics

Control and coherence time enhancement of the 0–π qubit

Agustín Di Paolo, Arne L. Grimsmo, Peter Groszkowski, Jens Koch, Alexandre Blais

Published Feb 22, 2019• 39 citations
arXivHTMLPDF

Abstract

Kitaev’s 0– π qubit encodes quantum information in two protected, near-degenerate states of a superconducting quantum circuit. In a recent work, we have shown that the coherence times of a realistic 0– π device can surpass that of today’s best superconducting qubits (Groszkowski et al 2018 New J. Phys. 20 043053). Here we address controllability of the 0– π qubit. Specifically, we investigate the potential for dispersive control and readout, and introduce a new, fast and high-fidelity single-qubit gate that can interpolate smoothly between logical X and Z . We characterize the action of this gate using a multi-level treatment of the device, and analyze the impact of circuit-element disorder and deviations in control and circuit parameters from their optimal values. Furthermore, we propose a cooling scheme to decrease the photon shot-noise dephasing rate, which we previously found to limit the coherence times of 0– π devices within reach of current experiments. Using this approach, we predict coherence time enhancements between one and three orders of magnitude, depending on parameter regime.

DOI
10.1088/1367-2630/ab09b0

Related papers

Coherence properties of the 0-πqubit

Peter Groszkowski, Agustín Di Paolo, Arne L. Grimsmo +4 more

Superconducting circuits rank among some of the most interesting architectures for the implementation of quantum information processing devices.The recently proposed 0-π qubit (Brooks et al 2013 Phys.Rev. A 87 52306) promises increased protection from spontaneous relaxation and dephasing.In this paper we present a detailed theoretical study of the coherence properties of the 0-π device, investigate relevant decoherence channels, and show estimates for achievable coherence times in multiple parameter regimes.In our analysis, we include disorder in circuit parameters, which results in the coupling of the qubit to a low-energy, spurious harmonic mode.We analyze the effects of such coupling on decoherence, in particular dephasing due to photon shot noise, and outline how such a noise channel can be mitigated by appropriate parameter choices.In the end we find that the 0-π qubit performs well and may become an attractive candidate for the implementation of the next-generation superconducting devices for uses in quantum computing and information.

arXiv:1708.02886•New Journal of Physics•Mar 19, 2018•97 citations

Experimental Realization of a Protected Superconducting Circuit Derived from the 0 - π Qubit

András Gyenis, Pranav Mundada, Agustín Di Paolo +6 more

Encoding a qubit in logical quantum states with wave functions characterized by disjoint support and robust energies can offer simultaneous protection against relaxation and pure dephasing. One of the most promising candidates for such a fully protected superconducting qubit is the 0-π circuit [Brooks et al., Phys. Rev. A 87, 052306 (2013)]. Here we realize the proposed circuit topology in an experimentally obtainable parameter regime, where the ground-state degeneracy is lifted but the qubit is still largely noise protected. More precisely, the logical states of this qubit feature disjoint support and are exponentially protected against relaxation and exponentially (first order) protected against dephasing due to charge (flux) noise. We name the resultant device the "soft 0-π qubit."Multitone spectroscopy measurements reveal the energy-level structure of the system, which can be precisely described by a simple two-mode Hamiltonian. Using a Raman-type protocol, we exploit a higher-lying charge-insensitive energy level of the device to realize coherent population transfer and logical operations. The measured relaxation (T1 = 1.6 ms) and dephasing (TR = 9 μs, T2E = 25μs) times demonstrate that the soft 0-π circuit not only broadens the family of superconducting qubits but also constitutes an important step toward quantum computing with intrinsically protected superconducting qubits.

•Mar 5, 2021•0 citations

Multi-level Control in Large-anharmonicity High-coherence Capacitively Shunted Flux Quantum Circuits

Muhammet Ali Yurtalan

Superconducting devices as quantum bits (qubits) are one of the most promising candidates for implementing a practical quantum computer. Over the last decade, quantum coherence times of superconducting qubits have been continuously improved. Operating qubits in noise insensitive points, eliminating the participation of the lossy materials, and better isolation from environment increased the decoherence times from nanoseconds to tens of microseconds. One recent approach on the qubit design is to shunt the Josephson junctions with large capacitors to reduce the sensitivity to noise and to redistribute the stored electromagnetic energy in a well-engineered area. This approach was first applied on charge qubits and later adopted to other types of superconducting qubits. \n \nIn this thesis, we present the design and the characterization of a three-Josephson junction superconducting circuit with three large shunt capacitors. We present experiments on decoherence in the circuit used as a qubit. The qubit relaxation time T₁ is reaching as high as 47 μs and the spin-echo dephasing time T₂ = 9.4 μs. In addition, we present spectroscopy experiments and decoherence characterization in the qutrit subspace formed by the lowest three energy levels. The spectroscopy data is in excellent agreement with the complete circuit model based on the system capacitance matrix. At the flux symmetry point, the circuit has a large anharmonicity, defined as the difference between the 1-2 and 0-1 transition frequencies, approaching 2π × 3.7 GHz, which is enabling fast single qubit operations. We performed randomized benchmarking with the qubit gates with a duration of 1.62 ns and an average gate fidelity of 99.9%. \n \nMoreover, we present experiments with multi-level control in qutrit subspace, formed by the lowest three energy levels. We demonstrate a single step experimental implementation of a generalized Walsh-Hadamard gate. We use a decomposition of the quantum gate into two unitary operations, one implemented by an off-diagonal Hamiltonian and the other implemented by a diagonal Hamiltonian. The off-diagonal Hamiltonian is obtained by the simultaneous driving of the transitions between levels 0-1, 1-2, and 0-2, with the latter being a two-photon process. The diagonal Hamiltonian is effectively implemented by appropriately shifting the phases of adjacent pulses. The gate is characterized using tomography process and the average fidelity exceeds 90%, in good agreement with numerical simulations that take into account the multi-level structure of the system.

•Apr 5, 2019•0 citations

Coherence-limited digital control of a superconducting qubit using a Josephson pulse generator at 3 K

M. A. Castellanos-Beltran, A. J. Sirois, L. Howe +4 more

Compared to traditional semiconductor control electronics (TSCE) located at room temperature, cryogenic single flux quantum (SFQ) electronics can provide qubit measurement and control alternatives that address critical issues related to scalability of cryogenic quantum processors. Single-qubit control and readout have been demonstrated recently using SFQ circuits coupled to superconducting qubits. Experiments where the SFQ electronics are co-located with the qubit have suffered from excess decoherence and loss due to quasiparticle poisoning of the qubit. A previous experiment by our group showed that moving the control electronics to the 3 K stage of the dilution refrigerator avoided this source of decoherence in a high-coherence 3D transmon geometry. In this paper, we also generate the pulses at the 3 K stage but have optimized the qubit design and control lines for scalable 2D transmon devices. We directly compare the qubit lifetime $T_1$, coherence time $T_2^*$ and gate fidelity when the qubit is controlled by the Josephson pulse generator (JPG) circuit versus the TSCE setup. We find agreement to within the daily fluctuations for $T_1$ and $T_2^*$, and agreement to within 10% for randomized benchmarking. We also performed interleaved randomized benchmarking on individual JPG gates demonstrating an average error per gate of $0.46$% showing good agreement with what is expected based on the qubit coherence and higher-state leakage. These results are an order of magnitude improvement in gate fidelity over our previous work and demonstrate that a Josephson microwave source operated at 3 K is a promising component for scalable qubit control.

quant-pharXiv:2512.07962•Applied Physics Letters•Dec 10, 2025•11 citations

Fast Gates for Bit-Flip Protected Superconducting Qubits

C. A. Siegele, А. Соколова, Lucky N. Kapoor +2 more

Superconducting qubits offer an unprecedentedly high degree of flexibility in terms of circuit encoding and parameter choices. However, in designing the qubit parameters, one typically faces the conflicting goals of long coherence times and simple control capabilities. Both are determined by the wavefunction overlap of the qubit basis states and the corresponding matrix elements. Here, we address this problem by introducing a qubit architecture with real-time tunable bit-flip protection. In the first, the “heavy” regime, the energy relaxation time can be on the order of hours for fluxons located in two near-degenerate ground states, as recently demonstrated in Ref. [Hassani ., (2023)]. The second, “light” regime, facilitates high-fidelity control on nanosecond timescales without the need for microwave signals. We propose two different tuning mechanisms of the qubit potential and show that base-band flux-pulses of around 10 ns are sufficient to realize a universal set of high-fidelity single- and two-qubit gates. This realizes a hardware-efficient and strongly noise-biased qubit platform with analogies to cat qubits with the potential for efficient quantum error correction. We expect that the introduced concept of fast and real-time wavefunction control can also be applied to other hardware-protected qubit designs.

PRX Quantum•Jul 31, 2026•0 citations

Josephson-Junction Qubits

Yuriy Makhlin, Gerd Schön, Alexander Shnirman

Among the potential physical implementations of quantum bits (qubits) solid state devices appear most promising for large scale applications and integration in electronic circuits. Devices based on low-capacitance Josephson junctions exploit the coherence of the superconducting state, combined with the possibility to control individual charges by Coulomb blockade effects. The logical states in these systems differ by one Cooper-pair charge. Single- and two-bit operations can be performed by applying a sequence of gate voltages. The phase coherence time is sufficiently long to allow a series of these steps. If, in addition, the strength of the Josephson coupling is controlled (e.g. by currents in SQUID loops) the system is ideal for quantum computation. Recent experiments by Nakamura et al. show the feasibility of this approach. In addition to the manipulations of qubits the resulting quantum state has to be read out. This quantum measurement process can be accomplished by coupling a single-electron transistor (SET) capacitively to the qubit. We investigate the process by analyzing the time-evolution of the density matrix of the coupled system. The measurement process is characterized by three time scales: the dephasing time, which is fast when a dissipative current flows in the SET, a longer ‘measurement time’ needed to read out the signal, and a third, even longer ‘mixing time’, characterizing measurement induced transitions which destroy the information about the initial quantum state. The noise spectrum of the current in the SET displays these time scales and allows their direct observation.

Fortschritte der Physik•Sep 1, 2000•9 citations
Kitaev’s 0– π qubit encodes quantum information in two protected, near-degenerate states of a superconducting quantum circuit. In a recent work, we have shown that the coherence times of a realistic 0– π device can surpass that of today’s best superconducting qubits (Groszkowski et al 2018 New J. Phys. 20 043053). Here we address controllability of the 0– π qubit. Specifically, we investigate the potential for dispersive control and readout, and introduce a new, fast and high-fidelity single-qubit gate that can interpolate smoothly between logical X and Z . We characterize the action of this gate using a multi-level treatment of the device, and analyze the impact of circuit-element disorder and deviations in control and circuit parameters from their optimal values. Furthermore, we propose a cooling scheme to decrease the photon shot-noise dephasing rate, which we previously found to limit the coherence times of 0– π devices within reach of current experiments. Using this approach, we predict coherence time enhancements between one and three orders of magnitude, depending on parameter regime.
Superconducting circuits rank among some of the most interesting architectures for the implementation of quantum information processing devices.The recently proposed 0-π qubit (Brooks et al 2013 Phys.Rev. A 87 52306) promises increased protection from spontaneous relaxation and dephasing.In this paper we present a detailed theoretical study of the coherence properties of the 0-π device, investigate relevant decoherence channels, and show estimates for achievable coherence times in multiple parameter regimes.In our analysis, we include disorder in circuit parameters, which results in the coupling of the qubit to a low-energy, spurious harmonic mode.We analyze the effects of such coupling on decoherence, in particular dephasing due to photon shot noise, and outline how such a noise channel can be mitigated by appropriate parameter choices.In the end we find that the 0-π qubit performs well and may become an attractive candidate for the implementation of the next-generation superconducting devices for uses in quantum computing and information.
Encoding a qubit in logical quantum states with wave functions characterized by disjoint support and robust energies can offer simultaneous protection against relaxation and pure dephasing. One of the most promising candidates for such a fully protected superconducting qubit is the 0-π circuit [Brooks et al., Phys. Rev. A 87, 052306 (2013)]. Here we realize the proposed circuit topology in an experimentally obtainable parameter regime, where the ground-state degeneracy is lifted but the qubit is still largely noise protected. More precisely, the logical states of this qubit feature disjoint support and are exponentially protected against relaxation and exponentially (first order) protected against dephasing due to charge (flux) noise. We name the resultant device the "soft 0-π qubit."Multitone spectroscopy measurements reveal the energy-level structure of the system, which can be precisely described by a simple two-mode Hamiltonian. Using a Raman-type protocol, we exploit a higher-lying charge-insensitive energy level of the device to realize coherent population transfer and logical operations. The measured relaxation (T1 = 1.6 ms) and dephasing (TR = 9 μs, T2E = 25μs) times demonstrate that the soft 0-π circuit not only broadens the family of superconducting qubits but also constitutes an important step toward quantum computing with intrinsically protected superconducting qubits.
Superconducting devices as quantum bits (qubits) are one of the most promising candidates for implementing a practical quantum computer. Over the last decade, quantum coherence times of superconducting qubits have been continuously improved. Operating qubits in noise insensitive points, eliminating the participation of the lossy materials, and better isolation from environment increased the decoherence times from nanoseconds to tens of microseconds. One recent approach on the qubit design is to shunt the Josephson junctions with large capacitors to reduce the sensitivity to noise and to redistribute the stored electromagnetic energy in a well-engineered area. This approach was first applied on charge qubits and later adopted to other types of superconducting qubits. \n \nIn this thesis, we present the design and the characterization of a three-Josephson junction superconducting circuit with three large shunt capacitors. We present experiments on decoherence in the circuit used as a qubit. The qubit relaxation time T₁ is reaching as high as 47 μs and the spin-echo dephasing time T₂ = 9.4 μs. In addition, we present spectroscopy experiments and decoherence characterization in the qutrit subspace formed by the lowest three energy levels. The spectroscopy data is in excellent agreement with the complete circuit model based on the system capacitance matrix. At the flux symmetry point, the circuit has a large anharmonicity, defined as the difference between the 1-2 and 0-1 transition frequencies, approaching 2π × 3.7 GHz, which is enabling fast single qubit operations. We performed randomized benchmarking with the qubit gates with a duration of 1.62 ns and an average gate fidelity of 99.9%. \n \nMoreover, we present experiments with multi-level control in qutrit subspace, formed by the lowest three energy levels. We demonstrate a single step experimental implementation of a generalized Walsh-Hadamard gate. We use a decomposition of the quantum gate into two unitary operations, one implemented by an off-diagonal Hamiltonian and the other implemented by a diagonal Hamiltonian. The off-diagonal Hamiltonian is obtained by the simultaneous driving of the transitions between levels 0-1, 1-2, and 0-2, with the latter being a two-photon process. The diagonal Hamiltonian is effectively implemented by appropriately shifting the phases of adjacent pulses. The gate is characterized using tomography process and the average fidelity exceeds 90%, in good agreement with numerical simulations that take into account the multi-level structure of the system.
Compared to traditional semiconductor control electronics (TSCE) located at room temperature, cryogenic single flux quantum (SFQ) electronics can provide qubit measurement and control alternatives that address critical issues related to scalability of cryogenic quantum processors. Single-qubit control and readout have been demonstrated recently using SFQ circuits coupled to superconducting qubits. Experiments where the SFQ electronics are co-located with the qubit have suffered from excess decoherence and loss due to quasiparticle poisoning of the qubit. A previous experiment by our group showed that moving the control electronics to the 3 K stage of the dilution refrigerator avoided this source of decoherence in a high-coherence 3D transmon geometry. In this paper, we also generate the pulses at the 3 K stage but have optimized the qubit design and control lines for scalable 2D transmon devices. We directly compare the qubit lifetime T1T_1T1​, coherence time T2∗T_2^*T2∗​ and gate fidelity when the qubit is controlled by the Josephson pulse generator (JPG) circuit versus the TSCE setup. We find agreement to within the daily fluctuations for T1T_1T1​ and T2∗T_2^*T2∗​, and agreement to within 10% for randomized benchmarking. We also performed interleaved randomized benchmarking on individual JPG gates demonstrating an average error per gate of 0.460.460.46% showing good agreement with what is expected based on the qubit coherence and higher-state leakage. These results are an order of magnitude improvement in gate fidelity over our previous work and demonstrate that a Josephson microwave source operated at 3 K is a promising component for scalable qubit control.
Superconducting qubits offer an unprecedentedly high degree of flexibility in terms of circuit encoding and parameter choices. However, in designing the qubit parameters, one typically faces the conflicting goals of long coherence times and simple control capabilities. Both are determined by the wavefunction overlap of the qubit basis states and the corresponding matrix elements. Here, we address this problem by introducing a qubit architecture with real-time tunable bit-flip protection. In the first, the “heavy” regime, the energy relaxation time can be on the order of hours for fluxons located in two near-degenerate ground states, as recently demonstrated in Ref. [Hassani ., (2023)]. The second, “light” regime, facilitates high-fidelity control on nanosecond timescales without the need for microwave signals. We propose two different tuning mechanisms of the qubit potential and show that base-band flux-pulses of around 10 ns are sufficient to realize a universal set of high-fidelity single- and two-qubit gates. This realizes a hardware-efficient and strongly noise-biased qubit platform with analogies to cat qubits with the potential for efficient quantum error correction. We expect that the introduced concept of fast and real-time wavefunction control can also be applied to other hardware-protected qubit designs.
Among the potential physical implementations of quantum bits (qubits) solid state devices appear most promising for large scale applications and integration in electronic circuits. Devices based on low-capacitance Josephson junctions exploit the coherence of the superconducting state, combined with the possibility to control individual charges by Coulomb blockade effects. The logical states in these systems differ by one Cooper-pair charge. Single- and two-bit operations can be performed by applying a sequence of gate voltages. The phase coherence time is sufficiently long to allow a series of these steps. If, in addition, the strength of the Josephson coupling is controlled (e.g. by currents in SQUID loops) the system is ideal for quantum computation. Recent experiments by Nakamura et al. show the feasibility of this approach. In addition to the manipulations of qubits the resulting quantum state has to be read out. This quantum measurement process can be accomplished by coupling a single-electron transistor (SET) capacitively to the qubit. We investigate the process by analyzing the time-evolution of the density matrix of the coupled system. The measurement process is characterized by three time scales: the dephasing time, which is fast when a dissipative current flows in the SET, a longer ‘measurement time’ needed to read out the signal, and a third, even longer ‘mixing time’, characterizing measurement induced transitions which destroy the information about the initial quantum state. The noise spectrum of the current in the SET displays these time scales and allows their direct observation.