Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1808.08589 · IEEE Transactions on Antennas and Propagation

An Atomic Receiver for AM and FM Radio Communication

David Alexander Anderson, Rachel Sapiro, Georg A. Raithel

Published Apr 16, 2020• 203 citations
arXivHTMLPDF

Abstract

Radio reception relies on antennas for the collection of electromagnetic fields carrying information, and receiver elements for demodulation and retrieval of the transmitted information. Here, we demonstrate an atom-based receiver for AM and FM microwave communication with a 3 dB bandwidth in the baseband of ~100 kHz that provides optical circuit-free field pickup, multiband carrier capability, and inherently high field sensitivity. The atom-based receiver exploits field-sensitive cesium Rydberg vapors in a centimeter-sized glass cell, and electromagnetically induced transparency, a quantum-optical effect, as a readout of baseband signals modulated onto carriers with frequencies ranging over four octaves, from C-band to Q-band. Receiver bandwidth, dynamic range and sideband suppression are characterized, and acquisition of audio waveforms of human vocals demonstrated. The atomic receiver is a valuable receiver technology because it does not require antenna structures and is resilient against electromagnetic interference, while affording multiband operation in a single compact receiving element.

DOI
10.1109/tap.2020.2987112

Related papers

Atom-based receiver for amplitude-modulated baseband signals in high-frequency radio communication

Yuechun Jiao, Xiaoxuan Han, Jiabei Fan +3 more

An atom-based sensor is used to retrieve baseband signals modulated onto a microwave carrier. The 60 S 1/2 level of cesium atoms in a vapor cell is optically probed via electromagnetically induced transparency. A 16.98-GHz carrier is resonant with the 60 S 1/2 → 60 P 1/2 transition, resulting in an Autler–Townes (AT) splitting. Amplitude modulation (AM) results in a variation of the AT splitting, which is processed to retrieve the AM baseband signals. The optically retrieved signal has a fidelity of >95%. We demonstrate a baseband bandwidth of the receiver of about 60 kHz and a dynamic range of about 30 dB.

arXiv:1804.07044•Applied Physics Express•Nov 5, 2019•84 citations

Rydberg atomic receiver for AM, FM, and phase shift keying data transmission

He Wang, Carl Boone, Gebriel H. Iyanu

Recently, Rydberg atoms have attracted increasing interests for applications as electric field sensors, RF spectrometers, and microwave receivers. In this paper, we present experimental studies of a cesium (Cs) Rydberg atomic microwave receiver and its temporal response characteristics to amplitude modulation (AM), frequency modulation (FM), and binary phase shift keying (BPSK) modulation. The receiver is associated with the Cs Rydberg transitions of n2D5/2 – (n+1)2P3/2 at various frequencies, which is generated by double-resonance laser excitations in a room temperature Cs vapor cell. We use the Electromagnetically Induced Transparency (EIT) and Autler-Townes (AT) effects to directly receive modulated microwave signals and recover the data encoded in the carriers. We demonstrated AM and FM digital data transmissions at data rates up to 1 Mbps and BPSK modulation and demodulation with a clock frequency of 250 kHz. Modulation depths up to 90% are experimentally observed and studied as a function of the modulation clock frequency. We also perform modeling to show that Cs atoms have accessible Rydberg transitions at frequencies covering the range from below GHz to THz for wideband microwave receiver applications across RF systems.

Optical and Quantum Sensing and Precision Metrology II•Mar 19, 2025•1 citation

Rydberg atom-based AM receiver with a weak continuous frequency carrier

Huaqiang Li, Jinlian Hu, Jingxu Bai +4 more

We demonstrate an atom-based amplitude-modulation (AM) receiver for digital communication with a weak continuous frequency carrier using a Rydberg AC Stark effect in a vapor cell and achieve the operating carrier frequency continuously from 0.1 GHz to 5 GHz at a single Rydberg state. A strong local oscillator (LO) field E LO acts as a gain to shift the Rydberg level to a high sensitivity region, and a weak carrier field E Carr keeps the same frequency with the LO field. The digital baseband signals are encoded onto the E Carr using the amplitude modulation technique with the different modulation frequency. The response of Rydberg atom to the baseband signal is probed via a Rydberg electromagnetically induced transparency (EIT). The measured instantaneous bandwidth of the system is about 230 kHz. To demonstrate the performance of our system for an actual communication, we consider a color image as an example, the received image displays that the bit error rate (BER) is less than 5% when the maximum data transfer rate is about 238 kbps. Meanwhile, our system shows the weak carrier field of E Carr ≥ 13.52 μ V/cm can be used for the practical communication with BER less than 5%. Our works break the limitation that EIT-AT based atomic receivers only operate at the near resonant frequencies of the Rydberg transitions, making this emerging of quantum technology close to the practical application with high sensitivity and broad bandwidth.

Optics Express•Mar 31, 2022•47 citations

Wideband Rydberg atom-based receiver for amplitude modulation radio frequency communication

Kai Yang, Zhanshan Sun, Ruiqi Mao +4 more

Based on Autler-Townes splitting and AC Stark shifts, we present a Rydberg atom-based receiver for determining the amplitude modulation (AM) frequency among a wideband carrier range utilizing a cesium atomic vapor cell.To verify this approach, we measured the signal-to-noise ratio and the data capacity with a 10 kHz AM frequency in the carrier range from 2 GHz to 18 GHz.Without changing the lasers, the working band can be easily extended to a higher range by optimizing the feed antenna and experimental configurations.

Chinese Optics Letters•Jan 1, 2022•32 citations

Quantum-Based Amplitude Modulation Radio Receiver Using Rydberg Atoms

Zhenfei Song, Wanfeng Zhang, Xiaochi Liu +4 more

The highly-excited Rydberg states are with a unique property of radio-frequency (RF) resonance, and Rydberg atoms at room temperature are promising for developing a broadband RF electric field sensor and relevant metrology standards. In this paper, the working mechanism of an atomic amplitude-modulation(AM) radio receiver is investigated in detail, and various factors affecting the communication quality are discussed. The modulation RF signal can be directly retrieved by measuring the transmission of a probe laser at resonance of rubidium D2 transition using a fast photo-diode detector, without any conventional demodulation process. Various communication experiments are tested at a 10.22 GHz carrier, and a modulation bandwidth of 1 MHz and an acceptable data transfer rate of about 1 Mbps have been achieved using current detection techniques. Owing to a potential high sensitivity and ultra-broadband capability of free-space RF field sensing, the quantum receiver has great significance compared with conventional electronics-based receivers, including but not limited to a weak signal, long-distance, and broadband communication in free space or via a fiber link.

IEEE Globecom Workshops (GC Wkshps)•Dec 1, 2018•8 citations

Atomic Receiver by Utilizing Multiple Radio-Frequency Coupling at Rydberg States of Rubidium

Haiyang Zou, Zhenfei Song, Huihui Mu +3 more

Rydberg atoms have been extensively utilized in microwave measurement with high sensitivity, which has great potential in the field of communication. In this study, we discuss the digital communication based on a Rydberg atomic receiver under simultaneously coupling by resonant and near detuning microwaves. In addition, we verify the feasibility of the Rydberg atom-based frequency division multiplexing (FDM) in microwave communication. We demonstrate the principle and performance of the atom-based FDM receiver by applying amplitude modulation (AM) and frequency modulation (FM), respectively. To demonstrate the actual communication performance at different data transfer rates, we consider monochromatic images as an example. The experimental results show that the maximum acceptable data transfer rate of both AM and FM is about 200 kbps, whereas their maximum bit error rates (BER) is less than 5%. When compared with the traditional electronic receiver, this atomic receiver, which is compatible with FDM, has numerous advantages, such as small size, low power consumption, and high sensitivity. Furthermore, this receiver has a strong ability of anti-electromagnetic interference, and the signals transmitted do not interfere with each other in different channels.

Applied Sciences•Feb 16, 2020•44 citations
Radio reception relies on antennas for the collection of electromagnetic fields carrying information, and receiver elements for demodulation and retrieval of the transmitted information. Here, we demonstrate an atom-based receiver for AM and FM microwave communication with a 3 dB bandwidth in the baseband of ~100 kHz that provides optical circuit-free field pickup, multiband carrier capability, and inherently high field sensitivity. The atom-based receiver exploits field-sensitive cesium Rydberg vapors in a centimeter-sized glass cell, and electromagnetically induced transparency, a quantum-optical effect, as a readout of baseband signals modulated onto carriers with frequencies ranging over four octaves, from C-band to Q-band. Receiver bandwidth, dynamic range and sideband suppression are characterized, and acquisition of audio waveforms of human vocals demonstrated. The atomic receiver is a valuable receiver technology because it does not require antenna structures and is resilient against electromagnetic interference, while affording multiband operation in a single compact receiving element.
An atom-based sensor is used to retrieve baseband signals modulated onto a microwave carrier. The 60 S 1/2 level of cesium atoms in a vapor cell is optically probed via electromagnetically induced transparency. A 16.98-GHz carrier is resonant with the 60 S 1/2 → 60 P 1/2 transition, resulting in an Autler–Townes (AT) splitting. Amplitude modulation (AM) results in a variation of the AT splitting, which is processed to retrieve the AM baseband signals. The optically retrieved signal has a fidelity of >95%. We demonstrate a baseband bandwidth of the receiver of about 60 kHz and a dynamic range of about 30 dB.
Recently, Rydberg atoms have attracted increasing interests for applications as electric field sensors, RF spectrometers, and microwave receivers. In this paper, we present experimental studies of a cesium (Cs) Rydberg atomic microwave receiver and its temporal response characteristics to amplitude modulation (AM), frequency modulation (FM), and binary phase shift keying (BPSK) modulation. The receiver is associated with the Cs Rydberg transitions of n2D5/2 – (n+1)2P3/2 at various frequencies, which is generated by double-resonance laser excitations in a room temperature Cs vapor cell. We use the Electromagnetically Induced Transparency (EIT) and Autler-Townes (AT) effects to directly receive modulated microwave signals and recover the data encoded in the carriers. We demonstrated AM and FM digital data transmissions at data rates up to 1 Mbps and BPSK modulation and demodulation with a clock frequency of 250 kHz. Modulation depths up to 90% are experimentally observed and studied as a function of the modulation clock frequency. We also perform modeling to show that Cs atoms have accessible Rydberg transitions at frequencies covering the range from below GHz to THz for wideband microwave receiver applications across RF systems.
We demonstrate an atom-based amplitude-modulation (AM) receiver for digital communication with a weak continuous frequency carrier using a Rydberg AC Stark effect in a vapor cell and achieve the operating carrier frequency continuously from 0.1 GHz to 5 GHz at a single Rydberg state. A strong local oscillator (LO) field E LO acts as a gain to shift the Rydberg level to a high sensitivity region, and a weak carrier field E Carr keeps the same frequency with the LO field. The digital baseband signals are encoded onto the E Carr using the amplitude modulation technique with the different modulation frequency. The response of Rydberg atom to the baseband signal is probed via a Rydberg electromagnetically induced transparency (EIT). The measured instantaneous bandwidth of the system is about 230 kHz. To demonstrate the performance of our system for an actual communication, we consider a color image as an example, the received image displays that the bit error rate (BER) is less than 5% when the maximum data transfer rate is about 238 kbps. Meanwhile, our system shows the weak carrier field of E Carr ≥ 13.52 μ V/cm can be used for the practical communication with BER less than 5%. Our works break the limitation that EIT-AT based atomic receivers only operate at the near resonant frequencies of the Rydberg transitions, making this emerging of quantum technology close to the practical application with high sensitivity and broad bandwidth.
Based on Autler-Townes splitting and AC Stark shifts, we present a Rydberg atom-based receiver for determining the amplitude modulation (AM) frequency among a wideband carrier range utilizing a cesium atomic vapor cell.To verify this approach, we measured the signal-to-noise ratio and the data capacity with a 10 kHz AM frequency in the carrier range from 2 GHz to 18 GHz.Without changing the lasers, the working band can be easily extended to a higher range by optimizing the feed antenna and experimental configurations.
The highly-excited Rydberg states are with a unique property of radio-frequency (RF) resonance, and Rydberg atoms at room temperature are promising for developing a broadband RF electric field sensor and relevant metrology standards. In this paper, the working mechanism of an atomic amplitude-modulation(AM) radio receiver is investigated in detail, and various factors affecting the communication quality are discussed. The modulation RF signal can be directly retrieved by measuring the transmission of a probe laser at resonance of rubidium D2 transition using a fast photo-diode detector, without any conventional demodulation process. Various communication experiments are tested at a 10.22 GHz carrier, and a modulation bandwidth of 1 MHz and an acceptable data transfer rate of about 1 Mbps have been achieved using current detection techniques. Owing to a potential high sensitivity and ultra-broadband capability of free-space RF field sensing, the quantum receiver has great significance compared with conventional electronics-based receivers, including but not limited to a weak signal, long-distance, and broadband communication in free space or via a fiber link.
Rydberg atoms have been extensively utilized in microwave measurement with high sensitivity, which has great potential in the field of communication. In this study, we discuss the digital communication based on a Rydberg atomic receiver under simultaneously coupling by resonant and near detuning microwaves. In addition, we verify the feasibility of the Rydberg atom-based frequency division multiplexing (FDM) in microwave communication. We demonstrate the principle and performance of the atom-based FDM receiver by applying amplitude modulation (AM) and frequency modulation (FM), respectively. To demonstrate the actual communication performance at different data transfer rates, we consider monochromatic images as an example. The experimental results show that the maximum acceptable data transfer rate of both AM and FM is about 200 kbps, whereas their maximum bit error rates (BER) is less than 5%. When compared with the traditional electronic receiver, this atomic receiver, which is compatible with FDM, has numerous advantages, such as small size, low power consumption, and high sensitivity. Furthermore, this receiver has a strong ability of anti-electromagnetic interference, and the signals transmitted do not interfere with each other in different channels.