Superconducting circuits consisting of a few low-anharmonic transmons coupled to readout and bus resonators can perform basic quantum computations. Since the number of qubits in such circuits is limited to not more than a few tens, the qubits can be designed to operate within the dispersive regime where frequency detunings are much stronger than coupling strengths. However, scaling up the number of qubits will bring the circuit out of the regime, and this invalidates current theories. We develop a formalism that allows to consistently diagonalize the superconducting circuit Hamiltonian beyond the dispersive regime. This will allow to study qubit-qubit interaction unperturbatively, therefore, our formalism remains valid and accurate at small or even negligible frequency detuning; thus, our formalism serves as a theoretical ground for designing qubit characteristics for scaling up the number of qubits in superconducting circuits. We study the most important circuits with single- and two-qubit gates, i.e., a single transmon coupled to a resonator and two transmons sharing a bus resonator. Surprisingly, our formalism allows to determine the circuit characteristics, such as dressed frequencies and Kerr couplings, in closed-form formulas that not only reproduce perturbative results, but also extrapolate beyond the dispersive regime and can ultimately reproduce (and even modify) the Jaynes-Cumming results at resonant frequencies.
Superconducting circuits consisting of a few low-anharmonic transmons coupled to readout and bus resonators can perform basic quantum computations. Since the number of qubits in such circuits is limited to not more than a few tens, the qubits can be designed to operate within the dispersive regime where frequency detunings are much stronger than coupling strengths. However, scaling up the number of qubits will bring the circuit out of the regime, and this invalidates current theories. We develop a formalism that allows to consistently diagonalize the superconducting circuit Hamiltonian beyond the dispersive regime. This will allow to study qubit-qubit interaction unperturbatively, therefore, our formalism remains valid and accurate at small or even negligible frequency detuning; thus, our formalism serves as a theoretical ground for designing qubit characteristics for scaling up the number of qubits in superconducting circuits. We study the most important circuits with single- and two-qubit gates, i.e., a single transmon coupled to a resonator and two transmons sharing a bus resonator. Surprisingly, our formalism allows to determine the circuit characteristics, such as dressed frequencies and Kerr couplings, in closed-form formulas that not only reproduce perturbative results, but also extrapolate beyond the dispersive regime and can ultimately reproduce (and even modify) the Jaynes-Cumming results at resonant frequencies.
A superconducting qubit coupled to a readout resonator is currently the building block of multiple quantum computing as well as quantum optics experiments. A typical qubit-resonator system is coupled in the dispersive regime, where the detuning between qubit and resonator is much greater than the coupling between them. In this work, we fabricated and measured a superconducting transmon-resonator system in the nondispersive regime. The dressed states formed by the mixing of the bare qubit and resonator states can be further mixed by applying a drive on the qubit, leading to the formation of polariton states. We report experimental studies of transitions between polariton states at varying driving powers and frequencies and show how the nondispersive coupling of the higher levels of the qubit-resonator system modifies the polariton eigenstates and the corresponding transition frequencies. We also report close agreement with numerical results obtained from a driven Jaynes-Cummings model beyond the dispersive regime.
Spectral properties of a quantum circuit are efficiently read out by monitoring the resonance frequency shift it induces in a microwave resonator coupled to it. When the two systems are strongly detuned, theory attributes the shift to an effective resonator capacitance or inductance that depends on the quantum circuit state. At small detuning, the shift arises from the exchange of virtual photons, as described by the Jaynes-Cummings model. Here we present a theory bridging these two limits and illustrate, with several examples, its necessity for a general description of quantum circuits readout. Circuit Quantum Electrodynamics (cQED) is at the heart of most advanced superconducting quantum technologies. Different types of superconducting qubits can be strongly coupled to microwave resonators thus achieving regimes and phenomenena which cannot be reached within the realm of quantum optics [1]. More recently, strong coupling between microwave resonators and a variety of other quantum systems not necessarily involving superconductors has been achieved [2], extending further the realm of cQED. In all these applications the measurement of the qubit or the hybrid device state is achieved by monitoring the resonator properties. Theoretically , two regimes have been approached using disconnected descriptions [3]: the dispersive regime, where the qubit-resonator detuning is larger than the coupling strength yet small enough to allow the exchange of virtual photons, and the adiabatic regime, where the de-tuning is sufficiently large for virtual processes to be strongly suppressed. The dispersive regime, which describes level repulsion between those of the quantum circuit and of the resonator, is typically dealt with using a Jaynes-Cummings Hamiltonian within different levels of approximation [3-10]. In contrast, the adiabatic regime accounts for the renormalization of the resonator capaci-tance/inductance by the effective capacitance of the circuit , including its "quantum capacitance" [11, 12], or its effective inductance [13, 14], which modifies the resonator frequency [15, 16]. However, there is no actual border between these two regimes which could justify a separate treatment, as illustrated by recent experiments on hybrid cQED setups [17] that reveal features of both regimes for the same device. This situation claims for a unified description of quantum circuits readout, going beyond the standard Jaynes-Cummings model, which could be applied to different types of devices over a large range of parameters. * Corresponding author : a.l.yeyati@uam.es In the present Letter we derive a general expression for the resonator frequency shift when coupled to a generic quantum circuit. This expression naturally interpolates between the adiabatic and the dispersive regimes, thus allowing to clarify their origin from the same coupling Hamiltonian. In addition our formalism is not restricted to the usual two-level approximations but any multilevel situation can be described on the same footing. We illustrate the importance of the different terms in our expression by analyzing well-known models like a short single channel superconducting weak link hosting Andreev states, the RF-SQUID and the Cooper pair box. Resonator-quantum circuit coupling.-The system we consider comprises a resonant circuit and a quantum circuit coupled through phase or charge fluctuations as depicted in Figs. 1(a), 2(a) and in the inset of Fig. 3. The resonant circuit is represented as a lumped-element LC resonator with bare resonance frequency f r = ω r /2π, with ω r = 1/ √ L r C r. Introducing the photon annihilation (creation) operators a (a †), it can be described by the Hamiltonian H r = ω r a † a. On the other hand, the quantum circuit Hamiltonian,Ĥ qc (x), depends on a dimensionless control parameter x, corresponding to an excess charge on a capacitor or a flux through a loop. We denote by |Φ i (x) the eigenstates of the uncoupled quantum circuit,Ĥ qc (x)|Φ i (x) = E i (x)|Φ i (x). Flux (charge) fluctuations in the resonator lead to x → x 0 +x r , wherex r = λ(s a + s * a †) with a coupling constant λ, depending on a coupling scheme [19], and s = 1 (−i). We assume λ 1 in accordance with experiments. The resonator-quantum circuit coupling HamiltonianĤ c is obtained by expandingĤ qc (x 0 +x r) up to second order inx rĤ c (x 0) =x rĤ qc (x 0) +x 2 r 2Ĥ qc (x 0), (1) where the prime stands for the derivative with respect to x. The Hamiltonian describing resonator, quantum
In circuit QED, protocols for quantum gates and readout of superconducting qubits often rely on the dispersive regime, reached when the qubit-photon detuning $\ensuremath{\Delta}$ is large compared to the mutual coupling strength. For qubits including the Cooper-pair box and transmon, selection rules dramatically restrict the contributions to dispersive level shifts $\ensuremath{\chi}$. By contrast, in the absence of selection rules many virtual transitions contribute to $\ensuremath{\chi}$ and can produce sizable dispersive shifts even at large detuning. We present theory for a generic multilevel qudit capacitively coupled to one or multiple harmonic modes and give general expressions for the effective Hamiltonian in second- and fourth-order perturbation theory. Applying our results to the fluxonium system, we show that the absence of strong selection rules explains the surprisingly large dispersive shifts observed in experiments and leads to the prediction of a two-photon vacuum Rabi splitting. Quantitative predictions from our theory are in good agreement with experimental data over a wide range of magnetic flux and reveal that fourth-order resonances are important for the phase modulation observed in fluxonium spectroscopy.
Superconducting qubit circuits are one of the prime candidates for building the quantum computer. In this guide I will provide a complete microwave description of the superconducting qubit circuits consisting of the most popular superconducting qubit the "Transmon". Quantum interaction rate parameters related to simple impedance response formulas will allow microwave engineers to design and analyze superconducting qubit circuits without resorting to heavy machinery of quantum mechanical transformations. All formulas listed below are valid in the dispersive regime of low anharmonicity qubits. This work is a review of [1].
The potential of superconducting qubits as the medium for a scalable quantum computer has motivated the pursuit of improved interactions within this system. Two challenges for the field of superconducting qubits are measurement fidelity, to accurately determine the state of the qubit, and the efficient transfer of quantum states. In measurement, the current state-of-the-art method employs dispersive readout, by coupling the qubit to a cavity and reading the resulting shift in cavity frequency to infer the qubit's state; however, this is vulnerable to Purcell relaxation, as well as being modeled off a simplified two-level abstraction of the qubit. In state transfer, the existing proposal for moving quantum states is mostly untested against non-idealities that will likely be present in an experiment. In this dissertation, we examine three problems within these two areas.We first describe a new scheme for fast and high-fidelity dispersive measurement specifically designed to circumvent the Purcell Effect. To do this, the qubit-resonator interaction is turned on only when the resonator is decoupled from the environment; then, after the resonator state has shifted enough to infer the qubit state, the qubit-resonator interaction is turned off before the resonator and environment are recoupled. We also show that the effectiveness of this ``Catch-Disperse-Release'' procedure partly originates from quadrature squeezing of the resonator state induced by the Jaynes-Cummings nonlinearity.The Catch-Disperse-Release measurement scheme treats the qubit as a two-level system, which is a common simplification used in theoretical works. However, the most promising physical candidate for a superconducting qubit, the transmon, is a multi-level system. In the second work, we examine the effects of including the higher energy levels of the transmon. Specifically, we expand the eigenstate picture developed in the first work to encompass multiple qubit levels, and examine the resulting changes to the system. In particular, we analyze the population of the non-target eigenstates as a result of this expanded model, and provide an analytical form for these deviations from the simpler model in Catch-Disperse-Release (i.e., the dressed state approximation).Lastly, we assess the robustness of the existing quantum state transfer protocol, testing its performance under typical experimental deviations from the ideal case. We show that the procedure is resilient to almost all non-idealities, except frequency mismatch between the two cavities. We also demonstrate a method to compensate for one such error in frequency-matching.
We generalize the dispersive theory of the Jaynes-Cummings model beyond the frequently employed rotating-wave approximation (RWA) in the coupling between the two-level system and the resonator. For a detuning sufficiently larger than the qubit-oscillator coupling, we diagonalize the non-RWA Hamiltonian and discuss the differences to the known RWA results. Our results extend the regime in which dispersive qubit readout is possible. If several qubits are coupled to one resonator, an effective qubit-qubit interaction of Ising type emerges, whereas RWA leads to isotropic XY interaction. This impacts on the entanglement characteristics of the qubits.