Directional amplifiers are crucial nonreciprocal devices in both classical and quantum information processing. Here we propose a scheme for realizing a directional amplifier between optical and microwave fields based on an optomechanical system with optical gain, where an active optical cavity and two passive microwave cavities are coupled to a common mechanical resonator via radiation pressure. The two passive cavities are coupled via hopping interaction to facilitate the directional amplification between the active and passive cavities. We obtain the condition of achieving optical directional amplification and find that the direction of amplification can be controlled by the phase differences between the effective optomechanical couplings. The effects of the gain rate of the active cavity and the effective coupling strengths on the maximum gain of the amplifier are discussed. We show that the noise added to this amplifier can be greatly suppressed in the large cooperativity limit.
Directional amplifiers are crucial nonreciprocal devices in both classical and quantum information processing. Here we propose a scheme for realizing a directional amplifier between optical and microwave fields based on an optomechanical system with optical gain, where an active optical cavity and two passive microwave cavities are coupled to a common mechanical resonator via radiation pressure. The two passive cavities are coupled via hopping interaction to facilitate the directional amplification between the active and passive cavities. We obtain the condition of achieving optical directional amplification and find that the direction of amplification can be controlled by the phase differences between the effective optomechanical couplings. The effects of the gain rate of the active cavity and the effective coupling strengths on the maximum gain of the amplifier are discussed. We show that the noise added to this amplifier can be greatly suppressed in the large cooperativity limit.
We theoretically propose a scheme for realizing a quantum-limited directional amplifier in a triple-cavity optomechanical system, where one microwave cavity and two optical cavities are, respectively, coupled to a common mechanical resonator. Moreover, the two optical cavities are coupled directly to facilitate the directional amplification between microwave and optical photons. We find that directional amplification between the three cavity modes is achieved with two gain process and one conversion process, and the direction of amplification can be modulated by controlling the phase difference between the field-enhanced optomechanical coupling strengths. Furthermore, with increasing the optomechanical cooperativity, both gain and bandwidth of the directional amplifier can be enhanced, and the noise added to the amplifier can be suppressed to approach the standard quantum limit on the phase-preserving linear amplifier.
We study the directional phase-sensitive amplification between microwave and optical photons in a triple-cavity optomechanical system consisting of three cavities and one mechanical resonator. When the microwave cavity is pumped on both red and blue sidebands but the directly coupled optical cavities are only pumped on the red sidebands, directional phase-sensitive amplification can be realized by tuning the effective optomechanical couplings and the coupling strength between the optical cavities. We show that both gain and bandwidth of the amplifier can be enhanced by increasing the optomechanical cooperativities, indicating an unlimited gain-bandwidth product. Meanwhile, the proposed phase-sensitive amplifier can approach the quantum limit of zero added noise in the large cooperativity limit.
Directional amplifiers are an important resource in quantum-information processing, as they protect sensitive quantum systems from excess noise. Here, we propose an implementation of phase-preserving and phase-sensitive directional amplifiers for microwave signals in an electromechanical setup comprising two microwave cavities and two mechanical resonators. We show that both can reach their respective quantum limits on added noise. In the reverse direction, they emit thermal noise stemming from the mechanical resonators; we discuss how this noise can be suppressed, a crucial aspect for technological applications. The isolation bandwidth in both is of the order of the mechanical linewidth divided by the amplitude gain. We derive the bandwidth and gain-bandwidth product for both and find that the phase-sensitive amplifier has an unlimited gain-bandwidth product. Our study represents an important step toward flexible, on-chip integrated nonreciprocal amplifiers of microwave signals.
High-gain amplifiers of electromagnetic signals operating near the quantum limit are crucial for quantum information systems and ultrasensitive quantum measurements.However, the existing techniques have a limited gain-bandwidth product and only operate with weak input signals.Here, we demonstrate a two-port optomechanical scheme for amplification and routing of microwave signals, a system that simultaneously performs high-gain amplification and frequency conversion in the quantum regime.Our amplifier, implemented in a two-cavity microwave optomechanical device, shows 41 dB of gain and has a high dynamic range, handling input signals up to 10 13 photons per second, 3 orders of magnitude more than corresponding Josephson parametric amplifiers.We show that although the active medium, the mechanical resonator, is at a high temperature far from the quantum limit, only 4.6 quanta of noise is added to the input signal.Our method can be readily applied to a wide variety of optomechanical systems, including hybrid optical-microwave systems, creating a universal hub for signals at the quantum level.
We propose a feasible and flexible scheme to realize all-optical photon switching, router and amplifier by using a passive-active optomechanical system consisting of a passive cavity, an active cavity and a common movable membrane oscillator. Due to the cooperation between the gain effect of the active cavity and the interference effect between the probe fields, some novel phenomena arise, such as the frequency-independent perfect reflection first proposed in this paper, controllable photon routing, tunable fast and slow lights and so on. Based on the results, a photon switching of absorption-amplification and fast-slow-light transitions, and a photon router with controllable direction and intensity can be realized by adjusting relevant parameters such as the strengths of control fields and the relative phase between probe fields. Such a scheme may provide a promising platform for controllable photon transport and photonic device fabrication.
Abstract Optical nonreciprocal transmission with unidirectional amplification in a gain-assisted cavity-QED system is investigated. The results demonstrate that unidirectional amplification of this system is induced by the phase difference between the atom–cavity coupling strengths associated with the optical gain and a phase-controlled unidirectional amplifier can be achieved. The optimal parameter conditions for the observation of ideal unidirectional amplification are obtained analytically, and are shown to be dependent on phase, atom–cavity and cavity–cavity coupling strength, and atomic dissipation. In particular, it is found that atomic dissipation is another essential condition for the realization of nonreciprocal amplification other than breaking of the time-reversal symmetry, and our unidirectional amplifier is robust against atom–cavity coupling mismatch. Such unidirectional amplifiers are crucial nonreciprocal devices for controlling photon transmission and may have potential applications in quantum information processing.