Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1804.09789 · Global Symposium on Millimeter-Waves

High-Resolution Antenna Near-Field Imaging and Sub-THz Measurements with a Small Atomic Vapor-Cell Sensing Element

David Alexander Anderson, Éric Paradis, Georg A. Raithel, Rachel Sapiro, Christopher L. Holloway

Published May 1, 2018• 22 citations
arXivHTMLPDF

Abstract

Atomic sensing and measurement of millimeterwave (mmW) and THz electric fields using quantum-optical EIT spectroscopy of Rydberg states in atomic vapors has garnered significant interest in recent years towards the development of atomic electric-field standards and sensor technologies. Here we describe recent work employing small atomic vapor cell sensing elements for near-field imaging of the radiation pattern of a Ku- band horn antenna at 13.49 GHz. We image fields at a spatial resolution of λ/10 and measure over a 72 to 240 V/m field range using off-resonance AC-Stark shifts of a Rydberg resonance. The same atomic sensing element is used to measure sub-THz electric fields at 255 GHz, an increase in mmW-frequency by more than one order of magnitude. The sub-THz field is measured over a continuous ±100 MHz frequency band using a near-resonant mmW atomic transition.

DOI
10.1109/gsmm.2018.8439437

Related papers

High-Resolution Near-Field Imaging and Far-Field Antenna Measurements with Atomic Sensors

David Alexander Anderson, Éric Paradis, Georg Raithe +3 more

Measurements of radio-frequency (RF) electric fields using atomic sensors based on quantum-optical spectroscopy of Rydberg states in vapors has garnered significant interest in recent years for the establishment of atomic standards for RF electric fields and towards the development of novel RF sensing instrumentation. Here we describe recent work employing atomic sensors for sub-wavelength near-field imaging of a Ku- band horn antenna. We demonstrate near-field imaging capability at a spatial resolution of λ/10 and measurements over a 72 to 240 V/m field range using off-resonance AC-Stark shifts of a Rydberg-atom resonance. A fiber-coupled atomic-sensor probe is also employed in far-field measurements of a WR-90 standard gain horn.

•Aug 1, 2018•2 citations

Atom-Based RF Electric Field Metrology: From Self-Calibrated Measurements to Subwavelength and Near-Field Imaging

Christopher L. Holloway, Matthew T. Simons, Joshua A. Gordon +4 more

We discuss a fundamentally new method for electric (E) field strength (V/m) metrology applicable to the near-field. This new approach is significantly different from currently used field measurement techniques in that it is based on the interaction of radio-frequency (RF) E-fields with Rydberg atoms (alkali atoms placed in a glass vapor cell that are excited optically to Rydberg states). The applied RF E-field alters the state of the atoms. The Rydberg atoms act like an RF-to-optical transducer, converting an RF E-field strength to an optical-frequency response. In this new approach, we employ the phenomena of electromagnetically induced transparency (EIT) and Autler-Townes splitting. The RF transition in the four-level atomic system causes a split of the EIT transmission spectrum of a probe laser into two peaks. This splitting is easily measured and is directly proportional to the applied RF E-field amplitude. The significant dipole response of Rydberg atoms enables this technique to make self-calibrating measurements over a large frequency band including 500 MHz to 500 GHz (and possibly up to 1 THz and down to 10s of megahertz). In this paper, we report on our results in the development of this metrology approach, including the first fiber-coupled vapor-cell for E-field measurements. We also discuss key applications, including self-calibrated measurements, millimeter-wave and sub-THz measurements, field mapping, and sub-wavelength and near-field imaging. We show results for mapping the fields inside vapor cells, for measuring the E-field distribution along the surface of a circuit board, and for measuring the near-field at the aperture in a cavity. We also discuss the uncertainties of this measurement technique.

IEEE Transactions on Electromagnetic Compatibility•Jan 10, 2017•158 citations

A High-Efficiency Fiber-Coupled Rydberg-Atom Integrated Probe and Its Imaging Applications

Ruiqi Mao, Yi Lin, Kai Yang +2 more

Atomic sensing and electric field measurements based on the use of the all-optical electromagnetic induction transparency (EIT) spectrum of Rydberg atoms have attracted great interest due to the advantages of self-calibration, Le Système International d'unités traceability, and a broadband spectrum. At the same time, this methodology also promotes the development of atomic sensor technology. We present a novel high-efficiency Rydberg-atom radio-frequency (RF) electric (E) field integrated probe (Rydberg Field Probe or RFP). The high-efficiency RFP consists of a 10 mm cubic 133Cs vapor cell, a dichroic mirror, three collimating lenses, and three fibers. This system can be used to independently control two counterpropagating lasers passing through a vapor cell, easing the design effort. In addition, the overall system efficiency can reach a value of 40.4%, reducing the EIT power broadening doe conventional RFPs. Based on the designed high-efficiency RFP, near-field electric field measurement and imaging of a C-band horn antenna at 4.48 GHz are performed by using the resonant RF field of the 133Cs atomic Rydberg state at room temperature with a spatial resolution of λ/6. These results promote the development of atomic sensing technology and show great application potential for the measurement of measuring high-resolution radio frequency electric fields and arrays of RFPs.

IEEE Antennas and Wireless Propagation Letters•Oct 5, 2022•54 citations

Measurement of low-frequency electric field waveform by Rydberg atom-based sensor

Xuechao Zhang, Jia-Hui Qiao, Yao Liu +6 more

The high polarizability of Rydberg atoms enables the multi-parameters measurement of electromagnetic fields. In this paper, we report on an atomic antenna based on Rydberg atoms in a room temperature vapor cell. The EIT is a destructive interference spectroscopy with a narrow linewidth and can be used to detect small electric fields through Autler-Townes splitting or Stark shifts. In our experiments, we employ cascade-type two-photon excitation electromagnetically induced transparency (EIT) spectroscopy to measure the shift of the Rydberg energy level. We introduce a low-frequency electric field (~kHz frequency) using a built-in electrode technique in the cesium cell. The interaction between the Rydberg atom and electric field induces the Stark shifts, where the amplitude of the electric field is converted into corresponding two-photon detuning by the EIT effect. Furthermore, the amplitude of the low-frequency electric field is converted into an intensity signal of EIT probe beam. Under weak field conditions, it is an approximate linear relationship between EIT transmission signal and input electric field amplitude, enabling measurement of waveform, amplitude, and frequency. We have demonstrated optical measurements of low-frequency electric field using Rydberg atoms. By increasing the power of probe beam and coupling beam, the EIT can increase the response bandwidth from ~MHz to hundreds of MHz. This provides a scalable approach for measuring high-frequency electric fields.

Acta Physica Sinica•Jan 1, 2024•4 citations

Measurements of High-Intensity Radio-Frequency Electric Fields with Rydberg Vapors

Georg A. Raithel, David Alexander Anderson

Measurements of radio-frequency (RF) electric fields in the MHz-to sub-THz range using EIT spectroscopy of Rydberg states in atomic vapors have garnered significant interest in recent years. Here we describe recent work extending the approach to measurements of coherent high-intensity RF electric fields above 1 kV/m and continuous-frequency RF measurement capability. The spectra are modeled using a non-perturbative Floquet model that accounts for higher-order interactions and state mixing. The spectroscopic data also reveal nonlinear amplifier behavior and noise.

Global Symposium on Millimeter-Waves•May 1, 2018•1 citation

Subwavelength microwave electric-field imaging using Rydberg atoms inside atomic vapor cells

H. Q. Fan, S. Kumar, Renate Daschner +2 more

We have recently shown [Nat. Phys.8, 819 (2012)] that Alkali atoms contained in a vapor cell can serve as a highly accurate standard for microwave (MW) electric field strength as well as polarization. Here we show for the first time that Rydberg atom electromagnetically induced transparency can be used to image MW electric fields with unprecedented precision. The spatial resolution of the method is far into the subwavelength regime ∼λ/650 or 66 μm at 6.9 GHz. The electric field resolutions are similar to those we have already demonstrated ∼50 μV cm(-1). Our experimental results agree with finite element calculations of test electric-field patterns.

arXiv:1403.3596•Optics Letters•May 13, 2014•164 citations
Atomic sensing and measurement of millimeterwave (mmW) and THz electric fields using quantum-optical EIT spectroscopy of Rydberg states in atomic vapors has garnered significant interest in recent years towards the development of atomic electric-field standards and sensor technologies. Here we describe recent work employing small atomic vapor cell sensing elements for near-field imaging of the radiation pattern of a Ku- band horn antenna at 13.49 GHz. We image fields at a spatial resolution of λ/10 and measure over a 72 to 240 V/m field range using off-resonance AC-Stark shifts of a Rydberg resonance. The same atomic sensing element is used to measure sub-THz electric fields at 255 GHz, an increase in mmW-frequency by more than one order of magnitude. The sub-THz field is measured over a continuous ±100 MHz frequency band using a near-resonant mmW atomic transition.
Measurements of radio-frequency (RF) electric fields using atomic sensors based on quantum-optical spectroscopy of Rydberg states in vapors has garnered significant interest in recent years for the establishment of atomic standards for RF electric fields and towards the development of novel RF sensing instrumentation. Here we describe recent work employing atomic sensors for sub-wavelength near-field imaging of a Ku- band horn antenna. We demonstrate near-field imaging capability at a spatial resolution of λ/10 and measurements over a 72 to 240 V/m field range using off-resonance AC-Stark shifts of a Rydberg-atom resonance. A fiber-coupled atomic-sensor probe is also employed in far-field measurements of a WR-90 standard gain horn.
We discuss a fundamentally new method for electric (E) field strength (V/m) metrology applicable to the near-field. This new approach is significantly different from currently used field measurement techniques in that it is based on the interaction of radio-frequency (RF) E-fields with Rydberg atoms (alkali atoms placed in a glass vapor cell that are excited optically to Rydberg states). The applied RF E-field alters the state of the atoms. The Rydberg atoms act like an RF-to-optical transducer, converting an RF E-field strength to an optical-frequency response. In this new approach, we employ the phenomena of electromagnetically induced transparency (EIT) and Autler-Townes splitting. The RF transition in the four-level atomic system causes a split of the EIT transmission spectrum of a probe laser into two peaks. This splitting is easily measured and is directly proportional to the applied RF E-field amplitude. The significant dipole response of Rydberg atoms enables this technique to make self-calibrating measurements over a large frequency band including 500 MHz to 500 GHz (and possibly up to 1 THz and down to 10s of megahertz). In this paper, we report on our results in the development of this metrology approach, including the first fiber-coupled vapor-cell for E-field measurements. We also discuss key applications, including self-calibrated measurements, millimeter-wave and sub-THz measurements, field mapping, and sub-wavelength and near-field imaging. We show results for mapping the fields inside vapor cells, for measuring the E-field distribution along the surface of a circuit board, and for measuring the near-field at the aperture in a cavity. We also discuss the uncertainties of this measurement technique.
Atomic sensing and electric field measurements based on the use of the all-optical electromagnetic induction transparency (EIT) spectrum of Rydberg atoms have attracted great interest due to the advantages of self-calibration, Le Système International d'unités traceability, and a broadband spectrum. At the same time, this methodology also promotes the development of atomic sensor technology. We present a novel high-efficiency Rydberg-atom radio-frequency (RF) electric (E) field integrated probe (Rydberg Field Probe or RFP). The high-efficiency RFP consists of a 10 mm cubic 133Cs vapor cell, a dichroic mirror, three collimating lenses, and three fibers. This system can be used to independently control two counterpropagating lasers passing through a vapor cell, easing the design effort. In addition, the overall system efficiency can reach a value of 40.4%, reducing the EIT power broadening doe conventional RFPs. Based on the designed high-efficiency RFP, near-field electric field measurement and imaging of a C-band horn antenna at 4.48 GHz are performed by using the resonant RF field of the 133Cs atomic Rydberg state at room temperature with a spatial resolution of λ/6. These results promote the development of atomic sensing technology and show great application potential for the measurement of measuring high-resolution radio frequency electric fields and arrays of RFPs.
The high polarizability of Rydberg atoms enables the multi-parameters measurement of electromagnetic fields. In this paper, we report on an atomic antenna based on Rydberg atoms in a room temperature vapor cell. The EIT is a destructive interference spectroscopy with a narrow linewidth and can be used to detect small electric fields through Autler-Townes splitting or Stark shifts. In our experiments, we employ cascade-type two-photon excitation electromagnetically induced transparency (EIT) spectroscopy to measure the shift of the Rydberg energy level. We introduce a low-frequency electric field (~kHz frequency) using a built-in electrode technique in the cesium cell. The interaction between the Rydberg atom and electric field induces the Stark shifts, where the amplitude of the electric field is converted into corresponding two-photon detuning by the EIT effect. Furthermore, the amplitude of the low-frequency electric field is converted into an intensity signal of EIT probe beam. Under weak field conditions, it is an approximate linear relationship between EIT transmission signal and input electric field amplitude, enabling measurement of waveform, amplitude, and frequency. We have demonstrated optical measurements of low-frequency electric field using Rydberg atoms. By increasing the power of probe beam and coupling beam, the EIT can increase the response bandwidth from ~MHz to hundreds of MHz. This provides a scalable approach for measuring high-frequency electric fields.
Measurements of radio-frequency (RF) electric fields in the MHz-to sub-THz range using EIT spectroscopy of Rydberg states in atomic vapors have garnered significant interest in recent years. Here we describe recent work extending the approach to measurements of coherent high-intensity RF electric fields above 1 kV/m and continuous-frequency RF measurement capability. The spectra are modeled using a non-perturbative Floquet model that accounts for higher-order interactions and state mixing. The spectroscopic data also reveal nonlinear amplifier behavior and noise.
We have recently shown [Nat. Phys.8, 819 (2012)] that Alkali atoms contained in a vapor cell can serve as a highly accurate standard for microwave (MW) electric field strength as well as polarization. Here we show for the first time that Rydberg atom electromagnetically induced transparency can be used to image MW electric fields with unprecedented precision. The spatial resolution of the method is far into the subwavelength regime ∼λ/650 or 66 μm at 6.9 GHz. The electric field resolutions are similar to those we have already demonstrated ∼50 μV cm(-1). Our experimental results agree with finite element calculations of test electric-field patterns.