The rate regions of many variations of the standard and wire-tap channels have been thoroughly explored. Secrecy capacity characterizes the loss of rate required to ensure that the adversary gains no information about the transmissions. Authentication does not have a standard metric, despite being an important counterpart to secrecy. While some results have taken an information-theoretic approach to the problem of authentication coding, the full rate region and accompanying trade-offs have yet to be characterized. In this paper, we provide an inner bound of achievable rates with an average authentication and reliability constraint. The bound is established by combining and analyzing two existing authentication schemes for both noisy and noiseless channels. We find that our coding scheme improves upon existing schemes.
The rate regions of many variations of the standard and wire-tap channels have been thoroughly explored. Secrecy capacity characterizes the loss of rate required to ensure that the adversary gains no information about the transmissions. Authentication does not have a standard metric, despite being an important counterpart to secrecy. While some results have taken an information-theoretic approach to the problem of authentication coding, the full rate region and accompanying trade-offs have yet to be characterized. In this paper, we provide an inner bound of achievable rates with an average authentication and reliability constraint. The bound is established by combining and analyzing two existing authentication schemes for both noisy and noiseless channels. We find that our coding scheme improves upon existing schemes.
This paper investigates the secret key authentication capacity region. Specifically, the focus is on a model where a source must transmit information over an adversary controlled channel where the adversary, prior to the source's transmission, decides whether or not to replace the destination's observation with an arbitrary one of their choosing (done in hopes of having the destination accept a false message). To combat the adversary, the source and destination share a secret key which they may use to guarantee authenticated communications. The secret key authentication capacity region here is then defined as the region of jointly achievable message rate, authentication rate, and key consumption rate (i.e., how many bits of secret key are needed). This is the first of a two part study, with the parts differing in how the authentication rate is measured. In this first study the authenticated rate is measured by the traditional metric of the maximum expected probability of false authentication. For this metric, we provide an inner bound which improves on those existing in the literature. This is achieved by adopting and merging different classical techniques in novel ways. Within these classical techniques, one technique derives authentication capability directly from the noisy communications channel, and the other technique derives its' authentication capability directly from obscuring the source.
This paper investigates the secret-key-authenticated-capacity region, where information-theoretic authentication is defined by the ability of the decoder to accept and decode messages originating from a valid encoder while rejecting messages from other invalid sources. The model considered here consists of a valid encoder-decoder pairing that can communicate through a channel controlled by an adversary who is also able to eavesdrop on the encoder’s transmissions. Over multiple rounds of communication, the adversary first decides whether or not to replace the decoder’s observation with an arbitrary one of the adversary’s choosing, with the goal of the adversary being to have the decoder accept and decode their observation as a valid message (different from that of the encoder). To combat the adversary, the encoder and decoder share a secret key. The secret-key-authenticated-capacity region here is then defined as the region of jointly achievable message rate, authentication rate (a to be defined per symbol measure that will generally represent the likelihood that an adversary can fool the decoder), and the key-consumption rate (how many bits of secret key are needed per symbol sent). This is the first of a two-part study, with the parts differing in their measure of the authentication rate. In this first study, the authentication rate is the exponent of blocklength-normalized exponent of the expected probability of false authentication. For this metric, we provide an inner bound which improves on those existing in the literature. This is achieved by adopting and merging different classical techniques in novel ways. Within these classical secret-key-based authentication techniques, one technique derives authentication capability from secure channel coding to send the secret key with the message, and the other technique derives its authentication capability directly from obscuring the source.
In this thesis, we consider a class of information protection problems requiring confidentiality (secrecy) from eavesdropping and integrity (reliability) from jamming in an information-theoretic context. For this purpose, we introduce the arbitrarily varying wire-tap channel (AVWTC) model consisting of a family of wiretap channels indexed by some state that is selected by the jammer in an arbitrary and time-varying manner. We study this model for traditional wiretap codes and randomized wiretap codes, and develop insights about the corresponding secrecy capacity and randomized-code secrecy capacity, respectively. We characterize a lower bound on the randomized-code secrecy capacity of the AVWTC that suggests the secrecy is mainly dictated by a worst-case scenario. Additionally, we establish two upper bounds on the randomized-code secrecy capacity that suggest a single bad ``averaged' state can preclude secure communication, while certain superiorities of the legitimate receiver over the eavesdropper in all ``averaged' states result in a positive secrecy capacity. Finally, we prove that the secrecy capacity of the AVWTC is either zero or equal to its randomized-code secrecy capacity. We show that a ``two-layer' wiretap code is appropriate for combatting the two non-colluding jamming and eavesdropping adversaries.
This paper investigates the secret key-authenticated-capacity region, where information-theoretic authentication is defined by the ability of the decoder to accept and decode messages originating from a valid encoder while rejecting messages from other invalid sources. The model considered here consists of a valid encoder-decoder pairing that can communicate through a channel controlled by an adversary who is also able to eavesdrop on the encoder’s transmissions. Prior to the encoder’s transmission, the adversary decides whether or not to replace the decoder’s observation with an arbitrary one of the adversary’s choosing, with the adversary’s objective being to have the decoder accept and decode their observation to a valid message (different from that of the encoder). To combat the adversary, the encoder and decoder share a secret key. The secret key-authenticated-capacity region is defined as the region of jointly achievable message rate, authentication rate (a to be defined per symbol measure that will generally represent the likelihood that an adversary can fool the decoder), and the key-consumption rate (how many bits of secret key are needed per symbol sent). This is the second of a two-part study, with the parts differing in their measure of the authentication rate. For this second study, the probability of false authentication is considered as a function of the system state, where the system state is defined by the message being transmitted, the value of the secret key, the adversary’s channel observations, and the adversary’s (possibly stochastic) choice for the decoder’s observation. Termed the typical-authentication rate, the authentication measure considered here corresponds to an upper bound on the probability of false authentication for the majority of system states. For this measure, we derive matching inner and outer bounds for the secret key-enabled authenticated capacity region in terms of traditional information-theoretic measures. In doing so, it is shown that the typical-authentication rate and the message rate exhibit a one-to-one trade-off in the capacity region.
This work establishes that the physical layer can be used to perform information-theoretic authentication in additive white Gaussian noise (AWGN) channels, as long as the adversary is not omniscient. The model considered consists of an encoder, decoder, and adversary, where the adversary knows the message given to the encoder, has a non-causal noisy observation of the encoder’s transmission and may use unlimited transmission power, while the decoder observes a noisy version of the sum of the encoder and adversary’s outputs. A method to modify a generic existing channel code to enable authentication is presented. This method relies on injecting message-dependent noise into the transmission and accepting the transmission as authentic only if the correct noise levels for the decoded message are observed. One drawback to this method is that the encoder must still transmit a low-power signal in the case where there is no message to send. It is shown that this modification costs an asymptotically negligible amount of the coding rate, while still enabling authentication as long as the adversary’s observation is not noiseless. Also notable is that this modification is not (asymptotically) a function of the statistical characterization of the adversary’s channel and no secret key is required. We believe these features will pave the way for a robust practical implementation. Using these results, the channel-authenticated capacity is calculated and shown to be equal to the non-adversarial channel capacity. As our results will show, information-theoretic authentication in AWGN channels is possible without the need for the legitimate party to have a model-based advantage over the adversary. While this modular scheme is designed for use in the given channel model, it is applicable to a wide range of settings.
This paper studies the secrecy results for the two-way wiretap channel (TW-WC) with an external eavesdropper under a strong secrecy metric. Employing non-adaptive coding, we analyze theinformation leakageand the decoding error probability, and derive inner bounds on the secrecy capacity regions for the TW-WC under strong joint and individual secrecy constraints. For the TW-WC without cost constraint, both the secrecy and error exponents could be characterized by theconditional Rényi mutual informationin a concise and compact form. And, some special cases secrecy capacity region and sum-rate capacity results are established, demonstrating that adaption is useless in some cases or the maximum sum-rate that could be achieved by non-adaptive coding. For the TW-WC with cost constraint, we consider the peak cost constraint and extend our secrecy results by using the constant composition codes. Accordingly, we characterize both the secrecy and error exponents bya modification of Rényi mutual information, which yields inner bounds on the secrecy capacity regions for the general discrete memoryless TW-WC with cost constraint. Our method works even when a pre-noisy processing is employed based on a conditional distribution in the encoder and can be easily extended to other multi-user communication scenarios.