Quantum topological error correction codes for quantum computation and communication
Daryus Chandra
The employment of quantum error correction codes (QECCs) within quantum computers potentially offers a reliability improvement for both quantum computation and communications tasks. However, the laws of quantum mechanics prevent us from directly invoking the mature family of classical error correction codes in the quantum domain. In order to circumvent the associated problems, the notion of quantum stabilizer codes (QSCs) was proposed in conjunction with syndrome-based decoding in the quantum regime. However, most of the powerful QSC schemes require long codewords for achieving a high performance, which potentially imposes additional challenges for implementation concerning their implementation, since their decoding may require longer than the quantum circuit's coherence time. Hence at the time of writing, QSCs exhibiting short to moderate codeword lengths are preferable. We commence by describing the pivotal problem encountered by classical error-correction codes, which also emerges when designing the QSCs, namely the intrinsic trade-off between the minimum distance versus coding rate. The complete formulation of this particular trade-off does not exist, but several lower and upper bounds can be found in the literature. It has been shown that a substantial gap can be observed between the upper and lower bound of the minimum distance, given the codeword length and the quantum coding rate. Hence, we propose an appealingly simple and invertible analytical approximation, for characterizing the trade-off between the quantum coding rate and the minimum distance of QSCs as well as their corresponding quantum bit error rate (QBER) performance upper-bound. For example, for a half-rate QSC having a codeword length of n = 128, the minimum distance is bounded by 11 < d < 22, while our approximation yields a minimum distance of d = 17 for the above-mentioned code. Next, we link this parametric study of the minimum distance versus quantum coding rate to the popular QSCs, namely to the family of quantum topological error correction codes (QTECCs). In order to construct the classical-to-quantum isomorphism, we conceive and investigate the family of classical topological error correction codes (TECCs), assuming that the bits of a codeword can be arranged in a lattice structure. We then present the classical-to-quantum isomorphism to pave the way for constructing their dual pairs in the quantum domain, which are the QTECCs. Finally, we characterize the performance of QTECCs in the face of the quantum depolarizing channel in terms of both their QBER and fidelity. Specifically, we demonstrate that for quantum coding rate rQ ~ 0, the threshold probability of the QBER below which the colour, rotated-surface, surface, and toric codes become capable of improving the uncoded QBER are given by 1.8 ×10-2, 1.3 ×10-2, 6.3 ×10-2 and 6.8 ×10-2, respectively. Furthermore, we also demonstrate that we can achieve beneficial fidelity improvements above the minimum fidelity of 0.94, 0.97 and 0.99 by employing the rQ = 1/7 colour code, the rQ = 1/9 rotated-surface code, and the rQ = 1/13 surface code, respectively. However, QSCs require additional quantum gates for their employment. Incorporating more quantum gates for performing error correction potentially introduces further sources of quantum decoherence into quantum computers. In this scenario, the primary challenge is to find the sufficient condition required by each of the quantum gates for beneficially employing QECCs in order to yield reliability improvements, given that the quantum gates utilized by the QECCs also introduce quantum decoherence. In this treatise, we approach this problem by firstly presenting the general framework of protecting quantum gates by the amalgamation of the transversal configuration of quantum gates and QSCs, which can be viewed as syndrome-based QECCs. Secondly, we provide examples of the advocated framework by invoking QTECCs for protecting both transversal Hadamard gates and controlled (CNOT) gates. Both our simulation and analytical results explicitly show that by utilizing QTECCs, the fidelity of the quantum gates can be beneficially improved, provided that quantum gates satisfying a certain minimum depolarization fidelity threshold (Fth) are available. For instance, for protecting transversal Hadamard gates, the minimum fidelity values required for each of the gates in order to attain fidelity improvements are 99.74%, 99.73%, 99.87%, and 99.86%, when they are protected by colour, rotated-surface, surface, and toric codes, respectively. Unfortunately, these specific Fth values can only be obtained for a very large number of physical qubits (n → ∞), when the quantum coding rate of the QTECCs approaches zero (rQ → 0). Finally, in order to conceive QSCs exhibiting a high quantum coding rate, we modify the construction of QTECCs for conceiving a low-complexity concatenated quantum turbocode (QTC). The above-mentioned high quantum coding rate is obtained by combining the quantum-domain version of short-block codes (SBCs) also known as single parity-check (SPC) codes as the outer codes and quantum unity-rate codes (QURCs) as the inner codes. Despite its design simplicity, the proposed QTC yields a near-hashing-bound error correction performance. For instance, compared to the best half-rate QTC known in the literature, namely the quantum irregular convolutional codes (QIrCCs) combined with the QURC scheme, which operates at the distance of D = 0.037 from the quantum hashing bound, our novel QSBC-QURC scheme can operate at the lower distance of D = 0:029. It is also worth mentioning that this is the first instantiation of QTCs capable of adjusting the quantum encoders according to the quantum coding rate required for mitigating the Pauli errors imposed by the time-variant depolarizing probabilities of the quantum channel.
•Jan 1, 2019•0 citations