Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1712.09245 · Annalen der Physik

High‐Speed Quantum Transducer with a Single‐Photon Emitter in a 2D Resonator

Xingyu Gao, Zhang‐Q. Yin, Tongcang Li

Published Aug 23, 2020• 10 citations
arXivHTMLPDF

Abstract

Abstract Quantum transducers can transfer quantum information between different systems. Microwave–optical photon conversion is important for future quantum networks to interconnect remote superconducting quantum computers with optical fibers. Here, a high‐speed quantum transducer based on a single‐photon emitter in an atomically thin membrane resonator, that can couple single microwave photons to single optical photons, is proposed. The 2D resonator is a freestanding van der Waals heterostructure (which may consist of hexagonal boron nitride, graphene, or other 2D materials) that hosts a quantum emitter. The mechanical vibration (phonon) of the 2D resonator interacts with optical photons by shifting the optical transition frequency of the single‐photon emitter with strain or the Stark effect. The mechanical vibration couples to microwave photons by shifting the resonant frequency of an LC circuit that includes the membrane. Thanks to the small mass of the 2D resonator, both the single‐photon optomechanical coupling strength and the electromechanical coupling strength can reach the strong coupling regime. This provides a way for high‐speed quantum state transfer between a microwave photon, a phonon, and an optical photon.

DOI
10.1002/andp.202000233

Related papers

Hybrid optomechanical systems as transducers for quantum information

S. Deléglise, Thibault Capelle, T. Jacqmin +5 more

Summary form only given. The motion of a micromechanical resonator coupled simultaneously to a high-finesse optical cavity and a microwave resonator can be used to transduce the fragile quantum states generated in the realm of microwave superconducting circuits into optical photons that can transport quantum information over large distances in telecom optical fibers at room temperature. We have engineered the optical and mechanical properties of thin membranes patterned in a suspended high-stress Si3N4 film to realize such a hybrid opto-electro-mechanical system. An optical Fabry-Perot cavity with a finesse exceeding 12 000 was realized between a highly reflective photonic crystal patch realized on the suspended membrane and a conventional high-reflectivity mirror. The electromechanical coupling with a nearby planar superconducting circuit is achieved by approaching the membrane at a sub-micron distance from an on-chip interdigitated capacitor. By operating the hybrid opto-electro-mechanical system in a cryogenic environment, the photon-phonon swap rates between microwave, mechanical, and optical degrees of freedom is expected to overcome the mechanical decoherence rate. An artist view of the device envisioned is depicted on Figure 1.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2017•0 citations

Hybrid optomechanical systems as transducers for quantum information

S. Deléglise, Thibault Capelle, Chen Xu +6 more

The motion of a micromechanical resonator coupled simultaneously to a high-finesse optical cavity and a microwave resonator can be used to transduce the fragile quantum states generated in the realm of microwave superconducting circuits into optical photons that can transport quantum information over large distances in telecom optical fibers at room temperature. We have engineered the optical and mechanical properties of thin membranes patterned in a suspended high-stress Si3N4 film to realize such a hybrid opto-electro-mechanical system. An optical Fabry-Perot cavity with a finesse exceeding 12 000 was realized between a highly reflective photonic crystal patch realized on the suspended membrane and a conventional high-reflectivity mirror. The electromechanical coupling with a nearby planar superconducting circuit is achieved by approaching the membrane at a sub-micron distance from an on-chip interdigitated capacitor. By operating the hybrid opto-electro-mechanical system in a cryogenic environment, the photon-phonon swap rates between microwave, mechanical, and optical degrees of freedom is expected to overcome the mechanical decoherence rate.

Quantum Information and Measurement (QIM)•Jan 1, 2017•0 citations

Microwave-to-Optical Transduction Using a Mechanical Supermode for Coupling Piezoelectric and Optomechanical Resonators

Marcelo Wu, Emil Zeuthen, Krishna C. Balram +1 more

The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency $\ensuremath{\eta}$ and added noise $N$. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in $\mathrm{Ga}\mathrm{As}$, followed by considerations of the $\mathrm{Al}\mathrm{N}$, ${\mathrm{Li}\mathrm{Nb}\mathrm{O}}_{3}$, and $\mathrm{Al}\mathrm{N}$-on-$\mathrm{Si}$ platforms. We present strategies for maximizing $\ensuremath{\eta}$ and minimizing $N$, and find that simultaneously achieving $\ensuremath{\eta}>50\mathrm{%}$ and $N<0.5$ should be possible with current technology. We find that the use of a mechanical supermode for mediating transduction is a key enabler for high-efficiency operation, particularly when paired with an appropriate microwave impedance-matching network. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a valuable resource for quantum information science.

arXiv:1907.04830•Physical Review Applied•Jan 16, 2020•74 citations

Coherent Conversion Between Microwave and Optical Photons—An Overview of Physical Implementations

N. J. Lambert, Alfredo Rueda, Florian Sedlmeir +1 more

Abstract Quantum information technology based on solid state qubits has created much interest in converting quantum states from the microwave to the optical domain. Optical photons, unlike microwave photons, can be transmitted by fiber, making them suitable for long distance quantum communication. Moreover, the optical domain offers access to a large set of very well‐developed quantum optical tools, such as highly efficient single‐photon detectors and long‐lived quantum memories. For a high fidelity microwave to optical transducer, efficient conversion at single photon level and low added noise is needed. Currently, the most promising approaches to build such systems are based on second‐order nonlinear phenomena such as optomechanical and electro‐optic interactions. Alternative approaches, although not yet as efficient, include magneto‐optical coupling and schemes based on isolated quantum systems like atoms, ions, or quantum dots. Herein, the necessary theoretical foundations for the most important microwave‐to‐optical conversion experiments are provided, their implementations are described, and the current limitations and future prospects are discussed.

arXiv:1906.10255•Advanced Quantum Technologies•Dec 12, 2019•189 citations

Microwave-to-optical transduction using coupled piezoelectric and optomechanical resonators

Marcelo Wu, Emil Zeuthen, Krishna C. Balram +1 more

The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically-mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency $\eta$ and added noise $N$. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in GaAs, followed by considerations of the AlN, LiNbO$_3$, and AlN-on-Si platforms. We present strategies for maximizing $\eta$ and minimizing $N$, and find that simultaneously achieving $\eta>50~\%$ and $N < 0.5$ should be possible with current technology. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a new resource for quantum information science.

•Jul 10, 2019•1 citation

A silicon‐organic hybrid platform for quantum microwave-to-optical transduction

Jeremy D. Witmer, Timothy P. McKenna, Patricio Arrangoiz-Arriola +6 more

Abstract Low-loss fiber optic links have the potential to connect superconducting quantum processors together over long distances to form large scale quantum networks. A key component of these future networks is a quantum transducer that coherently and bidirectionally converts photons from microwave frequencies to optical frequencies. We present a platform for electro-optic photon conversion based on silicon‐organic hybrid photonics. Our device combines high quality factor microwave and optical resonators with an electro-optic polymer cladding to perform microwave-to-optical photon conversion from 6.7 GHz to 193 THz (1558 nm). The device achieves an electro-optic coupling rate of 590 Hz in a millikelvin dilution refrigerator environment. We use an optical heterodyne measurement technique to demonstrate the single-sideband nature of the conversion with a selectivity of approximately 10 dB. We analyze the effects of stray light in our device and suggest ways in which this can be mitigated. Finally, we present initial results on high-impedance spiral resonators designed to increase the electro-optic coupling.

arXiv:1912.10346•Quantum Science and Technology•Mar 11, 2020•41 citations
Abstract Quantum transducers can transfer quantum information between different systems. Microwave–optical photon conversion is important for future quantum networks to interconnect remote superconducting quantum computers with optical fibers. Here, a high‐speed quantum transducer based on a single‐photon emitter in an atomically thin membrane resonator, that can couple single microwave photons to single optical photons, is proposed. The 2D resonator is a freestanding van der Waals heterostructure (which may consist of hexagonal boron nitride, graphene, or other 2D materials) that hosts a quantum emitter. The mechanical vibration (phonon) of the 2D resonator interacts with optical photons by shifting the optical transition frequency of the single‐photon emitter with strain or the Stark effect. The mechanical vibration couples to microwave photons by shifting the resonant frequency of an LC circuit that includes the membrane. Thanks to the small mass of the 2D resonator, both the single‐photon optomechanical coupling strength and the electromechanical coupling strength can reach the strong coupling regime. This provides a way for high‐speed quantum state transfer between a microwave photon, a phonon, and an optical photon.
Summary form only given. The motion of a micromechanical resonator coupled simultaneously to a high-finesse optical cavity and a microwave resonator can be used to transduce the fragile quantum states generated in the realm of microwave superconducting circuits into optical photons that can transport quantum information over large distances in telecom optical fibers at room temperature. We have engineered the optical and mechanical properties of thin membranes patterned in a suspended high-stress Si3N4 film to realize such a hybrid opto-electro-mechanical system. An optical Fabry-Perot cavity with a finesse exceeding 12 000 was realized between a highly reflective photonic crystal patch realized on the suspended membrane and a conventional high-reflectivity mirror. The electromechanical coupling with a nearby planar superconducting circuit is achieved by approaching the membrane at a sub-micron distance from an on-chip interdigitated capacitor. By operating the hybrid opto-electro-mechanical system in a cryogenic environment, the photon-phonon swap rates between microwave, mechanical, and optical degrees of freedom is expected to overcome the mechanical decoherence rate. An artist view of the device envisioned is depicted on Figure 1.
The motion of a micromechanical resonator coupled simultaneously to a high-finesse optical cavity and a microwave resonator can be used to transduce the fragile quantum states generated in the realm of microwave superconducting circuits into optical photons that can transport quantum information over large distances in telecom optical fibers at room temperature. We have engineered the optical and mechanical properties of thin membranes patterned in a suspended high-stress Si3N4 film to realize such a hybrid opto-electro-mechanical system. An optical Fabry-Perot cavity with a finesse exceeding 12 000 was realized between a highly reflective photonic crystal patch realized on the suspended membrane and a conventional high-reflectivity mirror. The electromechanical coupling with a nearby planar superconducting circuit is achieved by approaching the membrane at a sub-micron distance from an on-chip interdigitated capacitor. By operating the hybrid opto-electro-mechanical system in a cryogenic environment, the photon-phonon swap rates between microwave, mechanical, and optical degrees of freedom is expected to overcome the mechanical decoherence rate.
The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency $\ensuremath{\eta}$ and added noise NNN. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in GaAs\mathrm{Ga}\mathrm{As}GaAs, followed by considerations of the AlN\mathrm{Al}\mathrm{N}AlN, LiNbO3{\mathrm{Li}\mathrm{Nb}\mathrm{O}}_{3}LiNbO3​, and AlN\mathrm{Al}\mathrm{N}AlN-on-Si\mathrm{Si}Si platforms. We present strategies for maximizing $\ensuremath{\eta}$ and minimizing NNN, and find that simultaneously achieving $\ensuremath{\eta}>50\mathrm{%}$ and N<0.5N<0.5N<0.5 should be possible with current technology. We find that the use of a mechanical supermode for mediating transduction is a key enabler for high-efficiency operation, particularly when paired with an appropriate microwave impedance-matching network. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a valuable resource for quantum information science.
Abstract Quantum information technology based on solid state qubits has created much interest in converting quantum states from the microwave to the optical domain. Optical photons, unlike microwave photons, can be transmitted by fiber, making them suitable for long distance quantum communication. Moreover, the optical domain offers access to a large set of very well‐developed quantum optical tools, such as highly efficient single‐photon detectors and long‐lived quantum memories. For a high fidelity microwave to optical transducer, efficient conversion at single photon level and low added noise is needed. Currently, the most promising approaches to build such systems are based on second‐order nonlinear phenomena such as optomechanical and electro‐optic interactions. Alternative approaches, although not yet as efficient, include magneto‐optical coupling and schemes based on isolated quantum systems like atoms, ions, or quantum dots. Herein, the necessary theoretical foundations for the most important microwave‐to‐optical conversion experiments are provided, their implementations are described, and the current limitations and future prospects are discussed.
The successes of superconducting quantum circuits at local manipulation of quantum information and photonics technology at long-distance transmission of the same have spurred interest in the development of quantum transducers for efficient, low-noise, and bidirectional frequency conversion of photons between the microwave and optical domains. We propose to realize such functionality through the coupling of electrical, piezoelectric, and optomechanical resonators. The coupling of the mechanical subsystems enables formation of a resonant mechanical supermode that provides a mechanically-mediated, efficient single interface to both the microwave and optical domains. The conversion process is analyzed by applying an equivalent circuit model that relates device-level parameters to overall figures of merit for conversion efficiency η\etaη and added noise NNN. These can be further enhanced by proper impedance matching of the transducer to an input microwave transmission line. The performance of potential transducers is assessed through finite-element simulations, with a focus on geometries in GaAs, followed by considerations of the AlN, LiNbO3_33​, and AlN-on-Si platforms. We present strategies for maximizing η\etaη and minimizing NNN, and find that simultaneously achieving η>50 %\eta>50~\%η>50 % and N<0.5N < 0.5N<0.5 should be possible with current technology. Our comprehensive analysis of the full transduction chain enables us to outline a development path for the realization of high-performance quantum transducers that will constitute a new resource for quantum information science.
Abstract Low-loss fiber optic links have the potential to connect superconducting quantum processors together over long distances to form large scale quantum networks. A key component of these future networks is a quantum transducer that coherently and bidirectionally converts photons from microwave frequencies to optical frequencies. We present a platform for electro-optic photon conversion based on silicon‐organic hybrid photonics. Our device combines high quality factor microwave and optical resonators with an electro-optic polymer cladding to perform microwave-to-optical photon conversion from 6.7 GHz to 193 THz (1558 nm). The device achieves an electro-optic coupling rate of 590 Hz in a millikelvin dilution refrigerator environment. We use an optical heterodyne measurement technique to demonstrate the single-sideband nature of the conversion with a selectivity of approximately 10 dB. We analyze the effects of stray light in our device and suggest ways in which this can be mitigated. Finally, we present initial results on high-impedance spiral resonators designed to increase the electro-optic coupling.