© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

arXiv:1712.08631 · Quantum Science and Technology

Applying electric and magnetic field bias in a 3D superconducting waveguide cavity with high quality factor

M. Stammeier, Sébastien Garcia, Andreas J. Wallraff

Published Jul 13, 2018• 19 citations

Abstract

Abstract Three-dimensional microwave waveguide cavities are essential tools for many cavity quantum electrodynamics experiments. However, the need to control quantum emitters with dc magnetic fields inside the cavity often limits such experiments to normal-conducting cavities with relatively low quality factors of about 10 4 . Similarly, controlling quantum emitters with dc electric fields in normal- and superconducting waveguide cavities has so far been difficult, because the insertion of dc electrodes has strongly limited the quality factor. Here, we present a method to apply dc electric fields within a superconducting waveguide cavity, which is based on the insertion of dc electrodes at the nodes of the microwave electric field. Moreover, we present a method to apply dc magnetic fields within the same cavity by trapping the magnetic flux in holes positioned in facing walls of the cavity. We demonstrate that the TE 301 mode of such a superconducting, rectangular cavity made from niobium maintains a high internal quality factor of Q int ≃ 1.7 × 10 6 at the few photon level and a base temperature of 3 K. A cloud of Rydberg atoms coupled to the microwave electric field of the cavity is used to probe the applied dc electric and magnetic fields via the quadratic Stark effect and the Zeeman effect, respectively.

DOI: 10.1088/2058-9565/aad362

Related papers

3D microwave cavity with magnetic flux control and enhanced quality factor

Yarema Reshitnyk, Markus Jerger, Arkady Fedorov

Three-dimensional (3D) microwave cavities have been extensively used for coupling and interacting with superconducting quantum bits (qubits), providing a versatile platform for quantum control experiments and for realizing hybrid quantum systems. While having high quality factors (>10 6 ) superconducting cavities do not permit magnetic field control of qubits. In contrast, cavities made of normal metals are transparent to magnetic fields, but experience lower quality factors (∼10 4 ). We have created a hybrid cavity which is primarily composed of aluminium but also contains a small copper insert reaching the internal quality factor of ≃10 5 , an order of magnitude improvement over all previously tested normal metal cavities. In order to demonstrate precise magnetic control, we performed spectroscopy of three superconducting qubits, where individual control of each qubit’s frequency was exerted with small external wire coils. An improvement in quality factor and magnetic field control makes this 3D hybrid cavity an attractive new element for circuit quantum electrodynamics experiments.

arXiv:1603.07423•EPJ Quantum Technology•Oct 18, 2016•16 citations

Galvanically split superconducting microwave resonators for introducing internal voltage bias

Sebastian E. de Graaf, Dejan Davidovikj, A. A. Adamyan +2 more

We present the design and performance of high-Q superconducting niobium nitride microwave resonators intended for use in hybrid quantum systems, coupling spin degrees of freedom to the cavity mode, both magnetically and electrically. We demonstrate a solution that allows to introduce static electric fields in the resonator without compromising the microwave performance. Quality factors above 105 remain unchanged in strong applied static electric fields above 10 MV/m and magnetic fields up to ∼400 mT. By design, the configuration of the dc field matches that of the microwave field, especially advantageous for experiments on electrostatically controlled spin systems.

Applied Physics Letters•Feb 3, 2014•25 citations

A split-cavity design for the incorporation of a DC bias in a 3D microwave cavity

Martijn A. Cohen, Mingyun Yuan, Bas W. A. de Jong +3 more

We report on a technique for applying a DC bias in a 3D microwave cavity. We achieve this by isolating the two halves of the cavity with a dielectric and directly using them as DC electrodes. As a proof of concept, we embed a variable capacitance diode in the cavity and tune the resonant frequency with a DC voltage, demonstrating the incorporation of a DC bias into the 3D cavity with no measurable change in its quality factor at room temperature. We also characterize the architecture at millikelvin temperatures and show that the split cavity design maintains a quality factor Qi ∼ 8.8 × 105, making it promising for future quantum applications.

arXiv:1704.07220•Applied Physics Letters•Apr 24, 2017•11 citations

Optimized coplanar waveguide resonators for a superconductor–atom interface

M. A. Beck, J. A. Isaacs, D. Booth +3 more

We describe the design and characterization of superconducting coplanar waveguide cavities tailored to facilitate strong coupling between superconducting quantum circuits and single trapped Rydberg atoms. For initial superconductor–atom experiments at 4.2 K, we show that resonator quality factors above 104 can be readily achieved. Furthermore, we demonstrate that the incorporation of thick-film copper electrodes at a voltage antinode of the resonator provides a route to enhance the zero-point electric fields of the resonator in a trapping region that is 40 μm above the chip surface, thereby minimizing chip heating from scattered trap light. The combination of high resonator quality factor and strong electric dipole coupling between the resonator and the atom should make it possible to achieve the strong coupling limit of cavity quantum electrodynamics with this system.

arXiv:1605.01996•Applied Physics Letters•Aug 29, 2016•15 citations

Optimized coplanar waveguide resonators for a superconductor-atom interface

M. A. Beck, Joshua Isaacs, Donald W. Booth +3 more

We describe the design and characterization of superconducting coplanar waveguide cavities tailored to facilitate strong coupling between superconducting quantum circuits and single trapped Rydberg atoms. For initial superconductor-atom experiments at 4.2 K, we show that resonator quality factors above 104 can be readily achieved. Furthermore, we demonstrate that the incorporation of thick-film copper electrodes at a voltage antinode of the resonator provides a route to enhance the zero-point electric fields of the resonator in a trapping region that is 40 μm above the chip surface, thereby minimizing chip heating from scattered trap light. The combination of high resonator quality factor and strong electric dipole coupling between the resonator and the atom should make it possible to achieve the strong coupling limit of cavity quantum electrodynamics with this system.

•Sep 2, 2016•13 citations

Tunable Superconducting Cavity using Superconducting Quantum Interference Device Metamaterials

Samuel Kim, David B. Shrekenhamer, K. McElroy +2 more

Abstract Here we consider a tunable superconducting cavity that can be used either as a tunable coupler to a qubit inside the cavity or as a tunable low noise, low temperature, RF filter. Our design consists of an array of radio-frequency superconducting quantum interference devices (rf SQUIDs) inside a superconducting cavity. This forms a tunable metamaterial structure which couples to the cavity through its magnetic plasma frequency. By tuning the resonant frequency of the metamaterial through an applied magnetic flux, one can tune the cavity mode profile. This allows us to detune the cavity initially centered at 5.593 GHz by over 200 MHz. The maximum quality factor approaches that of the empty cavity, which is 4.5 × 106. The metamaterial electromagnetic response is controlled via a low-frequency or dc magnetic flux bias, and we present a control line architecture that is capable of applying sufficient magnetic flux bias with minimal parasitic coupling. Together this design allows for an in-situ tunable cavity which enables low-temperature quantum control applications.

Scientific Reports•Mar 15, 2019•12 citations

Abstract Three-dimensional microwave waveguide cavities are essential tools for many cavity quantum electrodynamics experiments. However, the need to control quantum emitters with dc magnetic fields inside the cavity often limits such experiments to normal-conducting cavities with relatively low quality factors of about 10 4 . Similarly, controlling quantum emitters with dc electric fields in normal- and superconducting waveguide cavities has so far been difficult, because the insertion of dc electrodes has strongly limited the quality factor. Here, we present a method to apply dc electric fields within a superconducting waveguide cavity, which is based on the insertion of dc electrodes at the nodes of the microwave electric field. Moreover, we present a method to apply dc magnetic fields within the same cavity by trapping the magnetic flux in holes positioned in facing walls of the cavity. We demonstrate that the TE 301 mode of such a superconducting, rectangular cavity made from niobium maintains a high internal quality factor of Q int ≃ 1.7 × 10 6 at the few photon level and a base temperature of 3 K. A cloud of Rydberg atoms coupled to the microwave electric field of the cavity is used to probe the applied dc electric and magnetic fields via the quadratic Stark effect and the Zeeman effect, respectively.

Three-dimensional (3D) microwave cavities have been extensively used for coupling and interacting with superconducting quantum bits (qubits), providing a versatile platform for quantum control experiments and for realizing hybrid quantum systems. While having high quality factors (>10 6 ) superconducting cavities do not permit magnetic field control of qubits. In contrast, cavities made of normal metals are transparent to magnetic fields, but experience lower quality factors (∼10 4 ). We have created a hybrid cavity which is primarily composed of aluminium but also contains a small copper insert reaching the internal quality factor of ≃10 5 , an order of magnitude improvement over all previously tested normal metal cavities. In order to demonstrate precise magnetic control, we performed spectroscopy of three superconducting qubits, where individual control of each qubit’s frequency was exerted with small external wire coils. An improvement in quality factor and magnetic field control makes this 3D hybrid cavity an attractive new element for circuit quantum electrodynamics experiments.

We present the design and performance of high-Q superconducting niobium nitride microwave resonators intended for use in hybrid quantum systems, coupling spin degrees of freedom to the cavity mode, both magnetically and electrically. We demonstrate a solution that allows to introduce static electric fields in the resonator without compromising the microwave performance. Quality factors above 105 remain unchanged in strong applied static electric fields above 10 MV/m and magnetic fields up to ∼400 mT. By design, the configuration of the dc field matches that of the microwave field, especially advantageous for experiments on electrostatically controlled spin systems.

We report on a technique for applying a DC bias in a 3D microwave cavity. We achieve this by isolating the two halves of the cavity with a dielectric and directly using them as DC electrodes. As a proof of concept, we embed a variable capacitance diode in the cavity and tune the resonant frequency with a DC voltage, demonstrating the incorporation of a DC bias into the 3D cavity with no measurable change in its quality factor at room temperature. We also characterize the architecture at millikelvin temperatures and show that the split cavity design maintains a quality factor Qi ∼ 8.8 × 105, making it promising for future quantum applications.

We describe the design and characterization of superconducting coplanar waveguide cavities tailored to facilitate strong coupling between superconducting quantum circuits and single trapped Rydberg atoms. For initial superconductor–atom experiments at 4.2 K, we show that resonator quality factors above 104 can be readily achieved. Furthermore, we demonstrate that the incorporation of thick-film copper electrodes at a voltage antinode of the resonator provides a route to enhance the zero-point electric fields of the resonator in a trapping region that is 40 μm above the chip surface, thereby minimizing chip heating from scattered trap light. The combination of high resonator quality factor and strong electric dipole coupling between the resonator and the atom should make it possible to achieve the strong coupling limit of cavity quantum electrodynamics with this system.

We describe the design and characterization of superconducting coplanar waveguide cavities tailored to facilitate strong coupling between superconducting quantum circuits and single trapped Rydberg atoms. For initial superconductor-atom experiments at 4.2 K, we show that resonator quality factors above 104 can be readily achieved. Furthermore, we demonstrate that the incorporation of thick-film copper electrodes at a voltage antinode of the resonator provides a route to enhance the zero-point electric fields of the resonator in a trapping region that is 40 μm above the chip surface, thereby minimizing chip heating from scattered trap light. The combination of high resonator quality factor and strong electric dipole coupling between the resonator and the atom should make it possible to achieve the strong coupling limit of cavity quantum electrodynamics with this system.

Abstract Here we consider a tunable superconducting cavity that can be used either as a tunable coupler to a qubit inside the cavity or as a tunable low noise, low temperature, RF filter. Our design consists of an array of radio-frequency superconducting quantum interference devices (rf SQUIDs) inside a superconducting cavity. This forms a tunable metamaterial structure which couples to the cavity through its magnetic plasma frequency. By tuning the resonant frequency of the metamaterial through an applied magnetic flux, one can tune the cavity mode profile. This allows us to detune the cavity initially centered at 5.593 GHz by over 200 MHz. The maximum quality factor approaches that of the empty cavity, which is 4.5 × 106. The metamaterial electromagnetic response is controlled via a low-frequency or dc magnetic flux bias, and we present a control line architecture that is capable of applying sufficient magnetic flux bias with minimal parasitic coupling. Together this design allows for an in-situ tunable cavity which enables low-temperature quantum control applications.