Abstract We introduce a simulator of a quantum internet with the specific goal to support software development. A quantum internet consists of local quantum processors, which are interconnected by quantum communication channels that enable the transmission of qubits between the different processors. While many simulators exist for local quantum processors, there is presently no simulator for a quantum internet tailored towards software development. Quantum internet protocols require both classical as well as quantum information to be exchanged between the network nodes, next to the execution of gates and measurements on a local quantum processor. This requires quantum internet software to integrate classical communication programming practises with novel quantum ones. SimulaQron is built to enable application development and explore software engineering practises for a quantum internet. SimulaQron can be run on one or more classical computers to simulate local quantum processors, which are transparently connected in the background to enable the transmission of qubits or the generation of entanglement between remote processors. Application software can access the simulated local quantum processors to execute local quantum instructions and measurements, but also to transmit qubits to remote nodes in the network. SimulaQron features a modular design that performs a distributed simulation based on any existing simulation of a quantum computer capable of integrating with Python. Programming libraries for Python and C are provided to facilitate application development.
Abstract We introduce a simulator of a quantum internet with the specific goal to support software development. A quantum internet consists of local quantum processors, which are interconnected by quantum communication channels that enable the transmission of qubits between the different processors. While many simulators exist for local quantum processors, there is presently no simulator for a quantum internet tailored towards software development. Quantum internet protocols require both classical as well as quantum information to be exchanged between the network nodes, next to the execution of gates and measurements on a local quantum processor. This requires quantum internet software to integrate classical communication programming practises with novel quantum ones. SimulaQron is built to enable application development and explore software engineering practises for a quantum internet. SimulaQron can be run on one or more classical computers to simulate local quantum processors, which are transparently connected in the background to enable the transmission of qubits or the generation of entanglement between remote processors. Application software can access the simulated local quantum processors to execute local quantum instructions and measurements, but also to transmit qubits to remote nodes in the network. SimulaQron features a modular design that performs a distributed simulation based on any existing simulation of a quantum computer capable of integrating with Python. Programming libraries for Python and C are provided to facilitate application development.
Abstract We introduce NetQASM, a low-level instruction set architecture for quantum internet applications. NetQASM is a universal, platform-independent and extendable instruction set with support for local quantum gates, powerful classical logic and quantum networking operations for remote entanglement generation. Furthermore, NetQASM allows for close integration of classical logic and communication at the application layer with quantum operations at the physical layer. This enables quantum network applications to be programmed in high-level platform-independent software, which is not possible using any other QASM variants. We implement NetQASM in a series of tools to write, parse, encode and run NetQASM code, which are available online. Our tools include a higher-level software development kit (SDK) in Python, which allows an easy way of programming applications for a quantum internet. Our SDK can be used at home by making use of our existing quantum simulators, NetSquid and SimulaQron, and will also provide a public interface to hardware released on a future iteration of Quantum Network Explorer.
Quantum mechanics shows that if one is able to generate and manipulate entanglement over a distance, one is able to perform certain tasks which are impossible using only classical communication. Classical communication refers to what is used in the Internet of today. A quantum internet would therefore bring new capabilities to our highly connected world. These capabilities both involve (1) the ability to perform tasks with are provably impossible in the current Internet, such as unconditionally secure communication, and (2) the ability to perform certain tasks much more efficient, such as distributed (quantum) computing or extending the baseline of telescopes. To be able to build a quantum internet, two main components are needed: (i) hardware that can store, manipulate and entangle qubits and (ii) a software stack to control the hardware. The core task of both of these is to generate entanglement to be used by applications. In this thesis we focus on the latter, i.e. the development of software and protocols that enable entanglement generation using capable hardware. To enable a certain application, one can certainly, in theory, manually specify each operation the hardware should perform, involving micro-wave pulses, lasers etc. However, in practice this is not feasible, if not to say impossible, due to the complexity of the operations needed, especially in a distributed system such as a quantum network. What is needed is a software stack, which can help with abstracting complexity away in multiple layers. This allows for someone to program a protocol in one layer without knowing all the details of the lower layers. In particular, one can abstract away the hardware details, in order to make higher-layer protocols and applications hardware-agnostic. Therefore, to be able to build a universal, efficient and scalable quantum internet, a software stack is crucial. In chapter 2 we start discussing the networking part of a software stack. Namely, we introduce a network stack for a quantum internet, drawing parallels to the IP/TCP-suite of the classical Internet. We continue with proposing a service and interface of the lowest layer of the network stack: the link layer. The link layer is here responsible for generating entanglement between nodes in a quantum network which are directly connected by a quantum link, i.e. a fiber cable. When developing a protocol or application it is very useful to be able to run it. Both to see if the intended ideas make sense and also to check that the implementation is actually correct. Currently we do not have quantum hardware that exposes a full-fledge API that can be used to execute applications. For this reason, it is very useful to be able to instead simulate the hardware in a way that exposes the same API as the hardware being developed. In chapter 3 we introduce SimulaQron for this exact purpose. Any application of a quantum internet will need entanglement in one way or another. However, entanglement is generally hard to generate and is usually the bottleneck when executing an application. We would therefore like to make use of the generated entanglement in the most optimal way. To be able to do this we need to understand how entanglement can be transformed and distributed in a quantum network. We study the entanglement of a particular class of states called graph states in chapters 4 to 9 and how these states can be transformed in a quantum network.
As quantum networking hardware remains costly and not yet widely accessible, simulation tools are essential for the design and evaluation of quantum network architectures and protocols. However, designing a scalable and computationally efficient quantum network simulator is intrinsically challenging: (i) quantum dynamics must be emulated on classical computing platforms while capturing the stateful and non-local nature of entanglement, a unique quantum resource without any classical networking analog; (ii) moreover, quantum networking is inherently hybrid, as protocol execution also fundamentally depends on classical signaling. This makes a tight and faithful co-simulation of quantum operations and classical message exchanges a core requirement. In this light, we present Q2NS, a modular and extensible quantum network simulator, built on top of ns-3, designed to seamlessly integrate quantum-network primitives with ns-3’s established classical protocol stack. Q2NS adopts a modular architecture that decouples protocol control logic from node- and channel-level operations, enabling rapid prototyping and adaptation across heterogeneous and evolving Quantum Internet scenarios. Q2NS natively supports multiple quantum state representations through a unified plug-in interface, allowing interchangeable state-vector, density-matrix, and stabilizer backends. We validate Q2NS through realistic use-case studies and comprehensive benchmarks, demonstrating superior computational efficiency over representative state-of-the-art alternatives, while preserving modeling flexibility. Finally, we provide a dedicated visualization tool that jointly captures physical and entanglement-enabled connectivity and supports entangled-state manipulations, facilitating an intuitive interpretation of entanglement dynamics and protocol behavior. Overall, Q2NS offers a flexible, open, and scalable simulation platform for advancing Quantum Internet research.
As quantum networking hardware remains costly and not yet widely accessible, simulation tools are essential for the design and evaluation of quantum network architectures and protocols. However, designing a scalable and computationally efficient quantum network simulator is intrinsically challenging: i) quantum dynamics must be emulated on classical computing platforms while capturing the stateful and non-local nature of entanglement, a quantum resource without any classical networking analog; ii) quantum networking is inherently hybrid, as protocol execution also fundamentally depends on classical signaling. This makes a tight and faithful co-simulation of quantum operations and classical message exchanges a core requirement. In this light, we present Q2NS, a modular and extensible quantum network simulator, built on top of ns-3, designed to seamlessly integrate quantum-network primitives with ns-3's established classical protocol stack. Q2NS adopts a modular architecture that decouples protocol control logic from node- and channel-level operations, enabling rapid prototyping and adaptation across heterogeneous and evolving Quantum Internet scenarios. Q2NS natively supports multiple quantum state representations through a unified interface, allowing interchangeable state-vector, density-matrix, and stabilizer backends. We validate Q2NS through realistic use-case studies and comprehensive benchmarks, demonstrating superior computational efficiency over representative state-of-the-art alternatives, while preserving modeling flexibility. Finally, we provide a dedicated visualization tool that jointly captures physical and entanglement-enabled connectivity and supports entangled-state manipulations, facilitating an intuitive interpretation of entanglement dynamics and protocol behavior. Q2NS offers a flexible, open, and scalable simulation platform for advancing Quantum Internet research.
As quantum networking hardware remains costly and not yet widely accessible, simulation tools are essential for the design and evaluation of quantum network architectures and protocols. However, designing a scalable and computationally efficient quantum network simulator is intrinsically challenging: (i) quantum dynamics must be emulated on classical computing platforms while capturing the stateful and non-local nature of entanglement, a unique quantum resource without any classical networking analog; (ii) moreover, quantum networking is inherently hybrid, as protocol execution also fundamentally depends on classical signaling. This makes a tight and faithful co-simulation of quantum operations and classical message exchanges a core requirement. In this light, we present Q2NS, a modular and extensible quantum network simulator, built on top of ns-3, designed to seamlessly integrate quantum-network primitives with ns-3’s established classical protocol stack. Q2NS adopts a modular architecture that decouples protocol control logic from node- and channel-level operations, enabling rapid prototyping and adaptation across heterogeneous and evolving Quantum Internet scenarios. Q2NS natively supports multiple quantum state representations through a unified plug-in interface, allowing interchangeable state-vector, density-matrix, and stabilizer backends. We validate Q2NS through realistic use-case studies and comprehensive benchmarks, demonstrating superior computational efficiency over representative state-of-the-art alternatives, while preserving modeling flexibility. Finally, we provide a dedicated visualization tool that jointly captures physical and entanglement-enabled connectivity and supports entangled-state manipulations, facilitating an intuitive interpretation of entanglement dynamics and protocol behavior. Overall, Q2NS offers a flexible, open, and scalable simulation platform for advancing Quantum Internet research.
The realization of a Quantum Internet is expected to transform communication networks by enabling intrinsically secure information exchange and distributed quantum applications. However, the experimental study of large-scale quantum networks remains limited by the high cost and operational constraints of quantum hardware. To address this challenge, this paper presents the design of a platform conceived to support research and experimentation in the field of quantum networking. The proposed system provides an emulation environment that mirrors the behavior of a real quantum network, enabling researchers to test protocols and mechanisms through a set of quantum operation instructions accessible via an Application Programming Interface (API). Emulated quantum nodes can be deployed across physically distributed locations, using physical or virtual machines or virtualization containers, allowing experiments to reproduce realistic network conditions and inter-node interactions. This approach enables applications to be executed over a persistent, configurable, and interactive environment that integrates both quantum and classical communication layers. To validate the feasibility of the proposed design, a prototype has been built and used to demonstrate its operation through a multi-hop quantum teleportation proof of concept. The results confirm the viability and flexibility of the architecture, laying the foundation for a distributed framework that facilitates the development and evaluation of quantum network architectures, control mechanisms, and experimental use cases.