Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1711.10383 · Physical Review Letters

Nonadditivity of Optical and Casimir-Polder Potentials

Sebastian Fuchs, Robert G. Bennett, Roman V. Krems, Stefan Yoshi Buhmann

Published Aug 22, 2018• 25 citations
arXivHTMLPDF

Abstract

An atom irradiated by an off-resonant laser field near a surface is expected to experience the sum of two fundamental potentials, the optical potential of the laser field and the Casimir-Polder potential of the surface. Here, we report a new nonadditive potential, namely, the laser-induced Casimir-Polder potential, which arises from a correlated coupling of the atom with both the laser and the quantum vacuum. We apply this result to an experimentally realizable scenario of an atomic mirror with an evanescent laser beam leaking out of a surface. We show that the nonadditive term is significant for realistic experimental parameters, transforming potential barriers into potential wells, which can be used to trap atoms near surfaces.

DOI
10.1103/physrevlett.121.083603

Related papers

Casimir-Polder potential of a driven atom

Sebastian Fuchs, Robert G. Bennett, Stefan Yoshi Buhmann

We investigate theoretically the Casimir-Polder potential of an atom which is driven by a laser field close to a surface. This problem is addressed in the framework of macroscopic quantum electrodynamics using the Green's tensor formalism and we distinguish between two different approaches: a perturbative ansatz and a method based on Bloch equations. We apply our results to a concrete example, namely an atom close to a perfectly conducting mirror, and create a scenario where the tunable Casimir-Polder potential becomes similar to the respective potential of an undriven atom due to fluctuating field modes. Whereas the perturbative approach is restricted to large detunings, the ansatz based on Bloch equations is exact and yields an expression for the potential which does not exceed $1/2$ of the undriven Casimir-Polder potential.

arXiv:1802.10360•Physical Review A•Aug 20, 2018•17 citations

Optomechanical Rydberg-Atom Excitation via Dynamic Casimir-Polder Coupling

Mauro Antezza, C. Braggio, G. Carugno +5 more

We study the optomechanical coupling of a oscillating effective mirror with a Rydberg atomic gas, mediated by the dynamical atom-mirror Casimir-Polder force. This coupling may produce a near-field resonant atomic excitation whose probability scales as ∝(d(2)an(4)t)(2)/z(0)(8), where z(0) is the average atom-surface distance, d the atomic dipole moment, a the mirror's effective oscillation amplitude, n the initial principal quantum number, and t the time. We propose an experimental configuration to realize this system with a cold atom gas trapped at a distance ∼2×10 μm from a semiconductor substrate whose dielectric constant is periodically driven by an external laser pulse, hence realizing an effective mechanical mirror motion due to the periodic change of the substrate from transparent to reflecting. For a parabolic gas shape, this effect is predicted to excite about ∼10(2) atoms of a dilute gas of 10(3) trapped Rydberg atoms with n=75 after about 0.5 μs, which is high enough to be detected in typical Rydberg gas experimental conditions.

arXiv:1406.1132•Physical Review Letters•Jul 7, 2014•35 citations

Laser Cooling and Trapping of Neutral Strontium for Spectroscopic Measurements of Casimir-Polder Potentials

Eryn C. Cook

Casimir and Casimir-Polder effects are forces between electrically neutral bodies and particles in vacuum, arising entirely from quantum fluctuations. The modification to the vacuum electromagnetic-field modes imposed by the presence of any particle or surface can result in these mechanical forces, which are often the dominant interaction at small separations. These effects play an increasingly critical role in the operation of micro- and nano-mechanical systems as well as miniaturized atomic traps for precision sensors and quantum-information devices. Despite their fundamental importance, calculations present theoretical and numeric challenges, and precise atom-surface potential measurements are lacking in many geometric and distance regimes. \n \nThe spectroscopic measurement of Casimir-Polder-induced energy level shifts in optical-lattice trapped atoms offers a new experimental method to probe atom-surface interactions. Strontium, the current front-runner among optical frequency metrology systems, has demonstrated characteristics ideal for such precision measurements. An alkaline earth atom possessing ultra-narrow intercombination transitions, strontium can be loaded into an optical lattice at the “magic” wavelength where the probe transition is unperturbed by the trap light. Translation of the lattice will permit controlled transport of tightly-confined atomic samples to well-calibrated atom- surface separations, while optical transition shifts serve as a direct probe of the Casimir-Polder potential. \n \nWe have constructed a strontium magneto-optical trap (MOT) for future Casimir-Polder experiments. This thesis will describe the strontium apparatus, initial trap performance, and some details of the proposed measurement procedure.

•Apr 10, 2018•1 citation

From Optical Lattice Clocks to the Measurement of Forces in the Casimir Regime

Peter Wolf, P. Lemonde, Astrid Lambrecht +3 more

The authors propose a novel experiment based on atoms trapped close to a macroscopic surface, to study the interactions between the atoms and the surface at very small separations (0.6 to 10 mum). In this range the dominant potential is the QED interaction (Casimir-Polder and Van der Waals) between the surface and the atom. Additionally, several theoretical models suggest the possibility of Yukawa type potentials with sub-mm range, arising from new physics related to gravity. The paper proposes a set-up very similar to neutral atom optical lattice clocks, but with the atoms trapped in lattice sites close to the reflecting mirror. A sequence of pulses of the probe laser at different frequencies is then used to create an interferometer with a coherent superposition between atomic states at different distances from the mirror (in different lattice sites). Assuming atom interferometry state of the art measurement of the phase difference and a duration of the superposition of about 0.1s we expect to be able to measure the potential difference between separated states with an uncertainty of about 10-4Hz. A preliminary analysis of systematic effects for different atoms (Sr, Yb, Rb, Cs) indicates no fundamentally limiting effect at the same level of uncertainty, but does influence the choice of atom and isotope. Based on those estimates, we expect that such an experiment would improve the best existing measurements of the atom-wall QED interaction by <2 orders of magnitude, whilst gaining up to 4 orders of magnitude on the best present limits on new interactions in the range between 100 nm and 100mum

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•Jun 1, 2006•6 citations

Atomic states in optical traps near a planar surface

Riccardo Messina, Sophie Pelisson, Marie-Christine Angonin +1 more

In this paper, we discuss the atomic states in a vertical optical lattice in proximity of a surface. We study the modifications to the ordinary Wannier-Stark states in the presence of a surface, and we characterize the energy shifts produced by the Casimir-Polder interaction between atom and mirror. In this context, we introduce an effective model describing the finite size of the atom in order to regularize the energy corrections. In addition, the modifications to the energy levels due to a hypothetical non-Newtonian gravitational potential as well as their experimental observability are investigated.

arXiv:1103.1581•Physical Review A•May 12, 2011•15 citations

Vacuum field correlations and three-body Casimir–Polder potential with one excited atom

Roberto Passante, Franco Persico, Lucia Rizzuto

The three-body Casimir–Polder potential between one excited and two ground-state atoms is evaluated. A physical model based on the dressed field correlations of vacuum fluctuations is used, generalizing a model previously introduced for three ground-state atoms. Although the three-body potential with one excited atom is already known in the literature, our model gives new insights on the nature of non-additive Casimir–Polder forces with one or more excited atoms.

arXiv:quant-ph/0411033•Journal of Modern Optics•Sep 20, 2005•16 citations
An atom irradiated by an off-resonant laser field near a surface is expected to experience the sum of two fundamental potentials, the optical potential of the laser field and the Casimir-Polder potential of the surface. Here, we report a new nonadditive potential, namely, the laser-induced Casimir-Polder potential, which arises from a correlated coupling of the atom with both the laser and the quantum vacuum. We apply this result to an experimentally realizable scenario of an atomic mirror with an evanescent laser beam leaking out of a surface. We show that the nonadditive term is significant for realistic experimental parameters, transforming potential barriers into potential wells, which can be used to trap atoms near surfaces.
We investigate theoretically the Casimir-Polder potential of an atom which is driven by a laser field close to a surface. This problem is addressed in the framework of macroscopic quantum electrodynamics using the Green's tensor formalism and we distinguish between two different approaches: a perturbative ansatz and a method based on Bloch equations. We apply our results to a concrete example, namely an atom close to a perfectly conducting mirror, and create a scenario where the tunable Casimir-Polder potential becomes similar to the respective potential of an undriven atom due to fluctuating field modes. Whereas the perturbative approach is restricted to large detunings, the ansatz based on Bloch equations is exact and yields an expression for the potential which does not exceed 1/21/21/2 of the undriven Casimir-Polder potential.
We study the optomechanical coupling of a oscillating effective mirror with a Rydberg atomic gas, mediated by the dynamical atom-mirror Casimir-Polder force. This coupling may produce a near-field resonant atomic excitation whose probability scales as ∝(d(2)an(4)t)(2)/z(0)(8), where z(0) is the average atom-surface distance, d the atomic dipole moment, a the mirror's effective oscillation amplitude, n the initial principal quantum number, and t the time. We propose an experimental configuration to realize this system with a cold atom gas trapped at a distance ∼2×10 μm from a semiconductor substrate whose dielectric constant is periodically driven by an external laser pulse, hence realizing an effective mechanical mirror motion due to the periodic change of the substrate from transparent to reflecting. For a parabolic gas shape, this effect is predicted to excite about ∼10(2) atoms of a dilute gas of 10(3) trapped Rydberg atoms with n=75 after about 0.5 μs, which is high enough to be detected in typical Rydberg gas experimental conditions.
Casimir and Casimir-Polder effects are forces between electrically neutral bodies and particles in vacuum, arising entirely from quantum fluctuations. The modification to the vacuum electromagnetic-field modes imposed by the presence of any particle or surface can result in these mechanical forces, which are often the dominant interaction at small separations. These effects play an increasingly critical role in the operation of micro- and nano-mechanical systems as well as miniaturized atomic traps for precision sensors and quantum-information devices. Despite their fundamental importance, calculations present theoretical and numeric challenges, and precise atom-surface potential measurements are lacking in many geometric and distance regimes. \n \nThe spectroscopic measurement of Casimir-Polder-induced energy level shifts in optical-lattice trapped atoms offers a new experimental method to probe atom-surface interactions. Strontium, the current front-runner among optical frequency metrology systems, has demonstrated characteristics ideal for such precision measurements. An alkaline earth atom possessing ultra-narrow intercombination transitions, strontium can be loaded into an optical lattice at the “magic” wavelength where the probe transition is unperturbed by the trap light. Translation of the lattice will permit controlled transport of tightly-confined atomic samples to well-calibrated atom- surface separations, while optical transition shifts serve as a direct probe of the Casimir-Polder potential. \n \nWe have constructed a strontium magneto-optical trap (MOT) for future Casimir-Polder experiments. This thesis will describe the strontium apparatus, initial trap performance, and some details of the proposed measurement procedure.
The authors propose a novel experiment based on atoms trapped close to a macroscopic surface, to study the interactions between the atoms and the surface at very small separations (0.6 to 10 mum). In this range the dominant potential is the QED interaction (Casimir-Polder and Van der Waals) between the surface and the atom. Additionally, several theoretical models suggest the possibility of Yukawa type potentials with sub-mm range, arising from new physics related to gravity. The paper proposes a set-up very similar to neutral atom optical lattice clocks, but with the atoms trapped in lattice sites close to the reflecting mirror. A sequence of pulses of the probe laser at different frequencies is then used to create an interferometer with a coherent superposition between atomic states at different distances from the mirror (in different lattice sites). Assuming atom interferometry state of the art measurement of the phase difference and a duration of the superposition of about 0.1s we expect to be able to measure the potential difference between separated states with an uncertainty of about 10-4Hz. A preliminary analysis of systematic effects for different atoms (Sr, Yb, Rb, Cs) indicates no fundamentally limiting effect at the same level of uncertainty, but does influence the choice of atom and isotope. Based on those estimates, we expect that such an experiment would improve the best existing measurements of the atom-wall QED interaction by <2 orders of magnitude, whilst gaining up to 4 orders of magnitude on the best present limits on new interactions in the range between 100 nm and 100mum
In this paper, we discuss the atomic states in a vertical optical lattice in proximity of a surface. We study the modifications to the ordinary Wannier-Stark states in the presence of a surface, and we characterize the energy shifts produced by the Casimir-Polder interaction between atom and mirror. In this context, we introduce an effective model describing the finite size of the atom in order to regularize the energy corrections. In addition, the modifications to the energy levels due to a hypothetical non-Newtonian gravitational potential as well as their experimental observability are investigated.