We develop a family of perfect quantum error correcting codes that correct for phase errors that arise on any qubit, at any time, during a perfect state transfer experiment. These ensure that we find the optimal operating regime for corrected state transfer. For a specific class of system, we further show that while dephasing noise can be corrected depolarizing noise cannot.
We develop a family of perfect quantum error correcting codes that correct for phase errors that arise on any qubit, at any time, during a perfect state transfer experiment. These ensure that we find the optimal operating regime for corrected state transfer. For a specific class of system, we further show that while dephasing noise can be corrected depolarizing noise cannot.
Quantum error correction is expected to be essential in large-scale quantum technologies. However, the substantial overhead of qubits it requires is thought to greatly limit its utility in smaller, near-term devices. Here we introduce a new family of special-purpose quantum error-correcting codes that offer an exponential reduction in overhead compared to the usual repetition code. They are tailored for a common and important source of decoherence in current experiments, whereby a register of qubits is subject to phase noise through coupling to a common fluctuator, such as a resonator or a spin defect. The smallest instance encodes one logical qubit into two physical qubits, and corrects decoherence to leading-order using a constant number of one- and two-qubit operations. More generally, while the repetition code on n qubits corrects errors to order t^{O(n)}, with t the time between recoveries, our codes correct to order t^{O(2^{n})}. Moreover, they are robust to model imperfections in small- and intermediate-scale devices, where they already provide substantial gains in error suppression. As a result, these hardware-efficient codes open a potential avenue for useful quantum error correction in near-term, pre-fault tolerant devices.
We compare the performance of quantum error correcting codes when memory errors are unitary with the more familiar case of dephasing noise. For a wide range of codes, we analytically compute the effective logical channel that results when the error correction steps are performed noiselessly. Our examples include the entire family of repetition codes, the five-qubit, Steane, Shor, and surface codes. When errors are measured in terms of the diamond norm, we find that the error correction is typically much more effective for unitary errors than for dephasing. We observe this behavior for a wide range of codes after a single level of encoding, and in the thresholds of concatenated codes using hard decoders. We show that this holds with great generality by proving a bound on the performance of any stabilizer code when the noise at the physical level is unitary. By comparing the diamond norm error ${D}_{\ensuremath{\diamond}}^{\ensuremath{'}}$ of the logical qubit with the same quantity at the physical level ${D}_{\ensuremath{\diamond}}$, we show that ${D}_{\ensuremath{\diamond}}^{\ensuremath{'}}\ensuremath{\le}c{D}_{\ensuremath{\diamond}}^{d}$ where d is the distance of the code and c is a constant that depends on the code but not on the error. This bound compares very favorably to the performance of error correction for dephasing noise and other Pauli channels, where an error correcting code of odd distance d will exhibit a scaling ${D}_{\ensuremath{\diamond}}^{\ensuremath{'}}\ensuremath{\sim}{D}_{\ensuremath{\diamond}}^{(d+1)/2}$.
We investigate the performance of a three-qubit error correcting code in the framework of superconducting qubit implementations. Such a code can recover a quantum state perfectly in the case of dephasing errors but only in situations where the dephasing rate is low. Numerical studies in previous work have however shown that the code does increase the fidelity of the encoded state even in the presence of high error probability, during both storage and processing. In this work we give analytical expressions for the fidelity of such a code. We consider two specific schemes for qubit-qubit interaction realizable in superconducting systems; one ${\ensuremath{\sigma}}_{z}{\ensuremath{\sigma}}_{z}$ coupling and one cavity-mediated coupling. With these realizations in mind, and considering errors during storing as well as processing, we calculate the maximum operation time allowed in order to still benefit from the code. We show that this limit can be reached with current technology.
Bosonic quantum error-correcting codes encode logical information in a harmonic oscillator, with the Gottesman-Kitaev-Preskill (GKP) and number-phase (NP) codes representing two fundamentally different encoding paradigms. Although both have been extensively studied, it remains unclear under what physical noise conditions (including photon loss and dephasing) one encoding intrinsically outperforms the other. Here we estimate a quantitative performance boundary between GKP and NP codes under general photon loss-dephasing noise. By optimizing code parameters within each encoding family, we identify the noise regimes in which each code exhibits a fundamental advantage. In particular, we find that the crossover occurs when the dephasing strength is approximately two orders of magnitude smaller than the loss strength, revealing a sharp separation between operational regimes. Beyond this specific comparison, our work establishes a practical and extensible methodology for benchmarking bosonic codes and optimizing their parameters, providing concrete guidance for the experimental selection and deployment of bosonic encodings in realistic noise environments.
Quantum computers have the potential to solve several interesting problems in polynomial \ntime for which no polynomial time classical algorithms have been found. However, \none of the major challenges in building quantum devices is that quantum systems are very \nsensitive to noise arising from undesired interactions with the environment. Noise can lead \nto errors which can corrupt the results of the computation. Quantum error correction is \none way to mitigate the effects of noise arising in quantum devices. \nWith a plethora of quantum error correcting codes that can be used in various settings, \none of the main challenges of quantum error correction is understanding how well various \ncodes perform under more realistic noise models that can be observed in experiments. \nThis thesis proposes a new decoding algorithm which can optimize threshold values of \nerror correcting codes under different noise models. The algorithm can be applied to \nany Markovian noise model. Further, it is shown that for certain noise models, logical \nClifford corrections can further improve a code's threshold value if the code obeys certain \nsymmetries. \n \nSince gates and measurements cannot in general be performed with perfect precision, \nthe operations required to perform quantum error correction can introduce more errors \ninto the system thus negating the benefits of error correction. Fault-tolerant quantum \ncomputing is a way to perform quantum error correction with imperfect operations while \nretaining the ability to suppress errors as long as the noise is below a code's threshold. \nOne of the main challenges in performing fault-tolerant error correction is the high resource \nrequirements that are needed to obtain very low logical noise rates. With the use of \nflag qubits, this thesis develops new fault-tolerant error correction protocols that are applicable \nto arbitrary distance codes. Various code families are shown to satisfy the requirements \nof flag fault-tolerant error correction. We also provide circuits using a constant number of \nqubits for these codes. It is shown that the proposed flag fault-tolerant method uses fewer \nqubits than previous fault-tolerant error correction protocols. \n \nIt is often the case that the noise afflicting a quantum device cannot be fully characterized. \nFurther, even with some knowledge of the noise, it can be very challenging to use \nanalytic decoding methods to improve the performance of a fault-tolerant scheme. This \nthesis presents decoding schemes using several state of the art machine learning techniques \nwith a focus on fault-tolerant quantum error correction in regimes that are relevant to near \nterm experiments. It is shown that even in low noise rate regimes and with no knowledge \nof the noise, noise can be further suppressed for small distance codes. Limitations of machine \nlearning decoders as well as the classical resources required to perform active error \ncorrection are discussed. \n \nIn many cases, gate times can be much shorter than typical measurement times of \nquantum states. Further, classical decoding of the syndrome information used in quantum \nerror correction to compute recovery operators can also be much slower than gate times. \nFor these reasons, schemes where error correction can be implemented in a frame (known \nas the Pauli frame) have been developed to avoid active error correction. In this thesis, we \ngeneralize previous Pauli frame schemes and show how Clifford frame error correction can \nbe implemented with minimal overhead. Clifford frame error correction is necessary if the \nlogical component of recovery operators were chosen from the Clifford group, but could \nalso be used in randomized benchmarking schemes.
Quantum error correction has recently emerged as a tool to enhance quantum sensing under Markovian noise. It works by correcting errors in a sensor while letting a signal imprint on the logical state. This approach typically requires a specialized error-correcting code, as most existing codes correct away both the dominant errors and the signal. To date, however, few such specialized codes are known, among which most require noiseless, controllable ancillas. We show here that such ancillas are not needed when the signal Hamiltonian and the error operators commute, a common limiting type of decoherence in quantum sensors. We give a semidefinite program for finding optimal ancilla-free sensing codes in general, as well as closed-form codes for two common sensing scenarios: qubits undergoing dephasing, and a lossy bosonic mode. Finally, we analyze the sensitivity enhancement offered by the qubit code under arbitrary spatial noise correlations, beyond the ideal limit of orthogonal signal and noise operators.