Coupling nitrogen-vacancy (NV) centers in diamonds to optical cavities is a promising way to enhance the efficiency of diamond-based quantum networks. An essential aspect of the full toolbox required for the operation of these networks is the ability to achieve the microwave control of the electron spin associated with this defect within the cavity framework. Here, we report on the fabrication of an integrated platform for the microwave control of an NV center electron spin in an open, tunable Fabry–Pérot microcavity. A critical aspect of the measurements of the cavity’s finesse reveals that the presented fabrication process does not compromise its optical properties. We provide a method to incorporate a thin diamond slab into the cavity architecture and demonstrate the control of the NV center spin. These results show the promise of this design for future cavity-enhanced NV center spin-photon entanglement experiments.
Coupling nitrogen-vacancy (NV) centers in diamonds to optical cavities is a promising way to enhance the efficiency of diamond-based quantum networks. An essential aspect of the full toolbox required for the operation of these networks is the ability to achieve the microwave control of the electron spin associated with this defect within the cavity framework. Here, we report on the fabrication of an integrated platform for the microwave control of an NV center electron spin in an open, tunable Fabry–Pérot microcavity. A critical aspect of the measurements of the cavity’s finesse reveals that the presented fabrication process does not compromise its optical properties. We provide a method to incorporate a thin diamond slab into the cavity architecture and demonstrate the control of the NV center spin. These results show the promise of this design for future cavity-enhanced NV center spin-photon entanglement experiments.
A quantumnetwork would allow the distribution of a quantum state over many spatially separated quantum nodes which individually possess the ability to generate, process and store quantum information. Connecting these nodes through quantum communication channels would enable sending quantum information over arbitrarily long distances, secret key distribution with guaranteed secure communication and distributed quantum computing. An appealing platform for implementation of quantum networks is the nitrogen-vacancy (NV) center in diamond. An NV center is an optically active defect in diamond created by the substitution of two adjacent carbon atoms in the diamond crystal matrix by a nitrogen atom and a neighboring vacancy. The NV center fits remarkably well in the described quantum network framework. Its electronic spin can be optically initialized, read out in a single shot, coherently manipulated and coupled to the nearby carbon-13 nuclear spins. These properties represent necessary ingredients of a multi-qubit quantum node. The possibility of the entanglement between the state of the NV center spin and a photon establishes a photonic quantum link which can enable the entanglement of the quantum nodes, forming a quantum network. First building blocks of the proposed quantum networks based on NV centers were demonstrated by performing entanglement between two distant NV centers separated by more than a kilometer. However, the current success rate of the entangling protocols is greatly reduced due to the low emission probability of the NV center photons into the resonant zero phonon line (ZPL) and the inefficient photon extraction from the diamond. This is the central problem which prevents promoting our experiments beyond proof-of-principle demonstration towards practical implementation of the proposed quantumnetworks. The goal of this thesis is tackling these issues by coupling NV centers to optical cavities which would greatly increase the rate of generation and collection of the ZPL photons through themechanism of Purcell enhancement. The design and the fabrication of the components constituting a diamond-basedFabry-Perot microcavity, as used in this thesis, are described in Chapter 4. For large enhancement of the NV center resonant emission, a low cavity mode volume is necessary. This is achieved by inserting a micrometers thin diamond slab into the cavity architecture; we present the fabrication details of such samples. Chapter 5 describes the fabrication of an integrated platform for microwave signal delivery to the NV centers within a diamond membrane in the cavity architecture. Microwave striplines and arrays of unique markers are embedded in the mirror onto which the diamond is bonded. We investigate the mirror optical properties post fabrication and find that the fabrication method preserves the mirror optical performance. We describe the diamond bonding method and demonstrate addressing of the NV center spin. In Chapter 6 we probe the properties of the cavity with the embedded diamond membrane through measurements of the cavity finesse. We investigate the cavity finesse dependence on length, mode structure and temperature. We further explore the operation at cryogenic temperatures by probing the effect of cryostation vibration on the cavity linewidth. Finally, in Chapter 7 we discuss ways of improving the existing experimental capabilities, outline the first steps for demonstrating enhancement of the NV center resonant emission and suggest future experiments that can be performed with this system. We conclude that coupling of the NV centers to the cavities developed in this research could lead to an increase of remote entanglement success rates by more than three orders of magnitude.
We report on the fabrication and characterization of a Fabry-Perot microcavity enclosing a thin diamond membrane at cryogenic temperatures. The cavity is designed to enhance resonant emission of single nitrogen-vacancy centers by allowing spectral and spatial tuning while preserving the optical properties observed in bulk diamond. We demonstrate cavity finesse at cryogenic temperatures within the range of F=4000–12 000 and find a sub-nanometer cavity stability. Modeling shows that coupling nitrogen-vacancy centers to these cavities could lead to an increase in remote entanglement success rates by three orders of magnitude.
The tin-vacancy (SnV) center in diamond is a promising spin-photon interface for quantum networks, combining favorable optical properties with spin coherence above 1K. Unfolding the full potential requires cavity enhancement to increase photon-emitter coupling efficiency. Here, we demonstrate cavity-enhanced light-matter coupling of SnV centers in a fully tunable Fabry-Pérot microcavity operating at temperatures down to 1K with in-situ magnetic field control. We access the diamond-like regime of hybrid cavity modes through integration of low-roughness diamond membranes, where the field is concentrated inside the diamond and Purcell enhancement is maximized. Diamond-like modes deliver a more than two-fold increase in the effective Purcell factor over air-like modes, reaching C0=4.1(1) compared to C0=1.85(5) in the air-like case, while simultaneously relaxing mechanical stability requirements. Resonant probing reveals coherent cavity-emitter coupling with 96% extinction contrast and a coherent cooperativity of C=4.0(14). By applying a magnetic field, we further achieve spin-resolved cavity extinction, observing spin-selective optical transitions with a contrast of Cspin=0.91. These results establish SnV centers in diamond coupled to open Fabry-Pérot microcavities as a promising platform for efficient spin-photon interfaces.
An efficient interface between a spin qubit and single photons is a key enabling system for quantum science and technology. We report on a coherently controlled diamond nitrogen-vacancy center electron spin qubit that is optically interfaced with an open microcavity. Through Purcell enhancement and an asymmetric cavity design, we achieve efficient collection of resonant photons, while on-chip microwave lines allow for spin qubit control at a 10 MHz Rabi frequency. With the microcavity tuned to resonance with the nitrogen-vacancy center’s optical transition, we use excited state lifetime measurements to determine a Purcell factor of 7.3 ± 1.6. Upon pulsed resonant excitation, we find a coherent photon detection probability of 0.5% per pulse. Although this result is limited by the finite excitation probability, it already presents an order of magnitude improvement over the solid immersion lens devices used in previous quantum network demonstrations. Furthermore, we use resonant optical pulses to initialize and read out the electron spin. By combining the efficient interface with spin qubit control, we generate two-qubit and three-qubit spin-photon states and measure heralded Z-basis correlations between the photonic time-bin qubits and the spin qubit. Current applications of NV centers in diamond as spin-photon interfaces for quantum networks are limited by low coherent photon emission. Here, the authors integrate a coherently controlled NV spin qubit with an open microcavity to achieve Purcell-enhanced emission and demonstrate spin-photon state generation.
This thesis describes a series of experiments on the control of the optical properties of the nitrogen-vacancy (NV) center in diamond, and on control of the electron and nuclear spin states associated with the NV center. The NV center is a fluorescing atomic defect center in diamond, consisting of a substitutional nitrogen atom adjacent to a vacancy in the diamond carbon lattice. The electron spin of the NV center can be initialized and read out optically, and coherently manipulated with high fidelity even at room temperature. This unique combination of properties has attracted much attention to the NV center in recent years for application in quantum information technologies. The experiments in this work focus on exploiting the intrinsic hybrid nature of the NV center. The NV center forms a hybrid spin register, as its electron spin is always coupled to the nuclear spin of its own nitrogen nucleus, and can furthermore be coupled to additional nuclear carbon-13 spins in the diamond. In addition, the electronic spin state can be mapped onto the state of a photon, in principle allowing long range transmission of quantum information and measurement-based entanglement of distant NV center registers. The long-term goal is to achieve a large scale quantum network where the different constituents each perform the task they are most well suited for: the stable nuclear spins store the quantum information, photons transfer quantum information over long distances, and the fast electron spin interfaces between spin and photon states. For measurement-based entanglement of distant NV centers it is of primary importance to maximize the emission and detection of coherent photons emitted by the NV center. Spontaneous emission can be controlled and enhanced by coupling an emitter to a photonic cavity. Chapters 3, 4, and 5 of this thesis describe experiments aimed at maximizing the coherent photon emission rate of an NV center by coupling the NV center to a photonic crystal cavity. One of the main challenges is to position a single NV center into the nanometer-sized cavity mode. Chapter 3 describes the development of a nanopositioning technique, which allows diamond nanocrystals ~50 nm in size containing single NV centers to be placed at arbitrary locations on a chip, with nanometer precision. By using a sharp etched tungsten tip, individual nanocrystals can be picked up, moved and placed under real-time imaging with an electron microscope. We explicitly demonstrate that the unique optical and spin properties of the NV center are conserved by the nanopositioning process. In chapter 4, we apply the nanopositioning technique to couple single NV centers contained in a diamond nanocrystals to gallium phosphide photonic crystal cavities. These cavities resonate in the visible with high quality factors, and are designed to have the lowest energy mode coincide with the zero-phonon line of the NV center. Efficient coupling is evidenced by a strong enhancement of NV center emission at the cavity wavelength. The high quality factor of a photonic crystal cavity is a result of careful design and fabrication. The introduction of a nanocrystal may therefore be expected to have a detrimental effect on the optical properties of a cavity. In chapter 5 we investigate the effect of a nanocrystal on the optical properties of photonic crystal cavities. Our simulations and measurements show that the effect of a nanocrystal is in fact only minor, a promising result for future work on cavity-QED systems in the solid state and with diamond defect centers in particular. Understanding and mitigating decoherence is a key challenge for quantum science and technology. The main source of decoherence for solid-state spin systems is the uncontrolled spin bath environment. Chapter 6 describes experiments that exploit quantum control of the NV center and recently developed dynamical decoupling techniques to study the properties of the surrounding bath of spins belonging to single substitutional nitrogen atoms. The coherence properties of a single NV center are affected by changes in the state of the bath spins, allowing a single NV center to be used as a probe to detect bath spin resonances and study the quantum dynamics of the spin bath. We use quantum control of the spin bath to extend the dephasing time of the NV center, important for the application of the NV center in DC magnetometry. In chapter 7 we describe the development and implementation of decoherence protected quantum gates for the hybrid spin register formed by the NV center electron spin that is coupled to the nuclear spin of its own nitrogen atom. Electron and nuclear spins evolve and decohere at vastly different rates, making it challenging to use such a hybrid system as a fully functional quantum register. We create a universal set of two-qubit quantum gates by integrating dynamical decoupling techniques into the gate operation. We demonstrate the power of our gate design by implementing for the first time Grover's quantum search algorithm on a solid-state spin register.
A key requirement for many applications in solid-state quantum sciences is a high fluence of indistinguishable photons. The spontaneous emission of these photons is governed by the coupling of an excited quantum system to electromagnetic vacuum fluctuations. In our experiment, we enhance this coupling by engineering a tunable Fabry-Perot microcavity. The quantum system we study is the nitrogen-vacancy (NV) center in diamond, a workhorse for quantum science and engineering, due to its optical transitions and the coherent electron spin system it hosts. Our device consists of a high-quality, nano-fabricated, single-crystalline diamond membrane bonded to a planar mirror; the cavity is completed by a second, concave mirror. Using piezo positioners, we achieve full spectral and spatial tunability and freedom in selecting NVs with favorable emission properties in our low-temperature (4 Kelvin) experiments. Upon tuning of the cavity into resonance, we find significant enhancement of the 637 nm zero phonon line for several individual NVs which is accompanied by a strong reduction of the overall photoluminescence (PL) lifetime. We infer a 30-fold enhancement of the zero-phonon transition rate at best. The fraction of the PL emission associated to this resonant transition is thereby increased from 3% to 46%. Our results constitute a significant leap on the route towards the implementation of fast long-distance quantum networks, which are currently limited by the photon emission rate in their nodes. Furthermore, our versatile design is readily applicable to other solid-state quantum emitters like color centers in silicon carbide.