The metrological ability of carefully designed probes can be wrecked by the presence of noise which alters their evolution, reducing the information on the parameter of interest. This spoils the signal-to-noise ratio of any possible measurement. Here we show an experiment in which the introduction of an ancilla improves the estimation of an optical phase with respect to a standard single-qubit strategy. The advantage originates from the coherent coupling of the probe and the ancilla both at the initialization and measurement stages, generating and selecting a subset of overall configurations less affected by the noise.
The metrological ability of carefully designed probes can be wrecked by the presence of noise which alters their evolution, reducing the information on the parameter of interest. This spoils the signal-to-noise ratio of any possible measurement. Here we show an experiment in which the introduction of an ancilla improves the estimation of an optical phase with respect to a standard single-qubit strategy. The advantage originates from the coherent coupling of the probe and the ancilla both at the initialization and measurement stages, generating and selecting a subset of overall configurations less affected by the noise.
This thesis explores various protocols which can be applied to quantum metrology, such that precision of the measurement can beat the best classical approaches. We first demonstrate that ancilla-assisted schemes can improve phase estimation in the presence of noise, and we propose an experiment to demonstrate these effects. Given that the use of ancillae helps, it is no surprise that there are noisy channels for which the optimal strategy may depend on the noise level. We show that there is a non-trivial crossover between the ancilla-assisted strategy and the parallel-entangled strategy for Pauli noise channels and the amplitude damping channel. We see that under certain circumstances, the environment cannot access the parameter of interest. We then integrated techniques from quantum communication, to derive a general framework that renders quantum metrology protocols into cryptographic ones. Here the protocol is unconditionally secure if the trusted parties wish only to achieve the standard quantum limit. If Heisenberg-limited precision is to be achieved, they sacrifice some security, where adversaries can access information, but only at the risk of getting caught at it (cheat-sensitivity). In many scenarios, the quantum Fisher information is achieved for only one value of the phase. In a particular phase estimation scheme that measures the parity at the output of a Mach-Zehnder interferometer where the input is a two-mode squeezed vacuum, this problem is particularly imminent. We apply an adaptive technique to resolve this issue, showing that one can achieve precisions substantially below the shot noise limit. The key to a quadratically enhanced improvement in quantum metrology is entanglement. Finally, we demonstrate in a photonic system how high-dimensional entanglement can be certified, and provide an alternate interpretation of entanglement from an information-theoretic perspective.
Quantum metrology overcomes standard precision limits and plays a central role in science and technology. Practically, it is vulnerable to imperfections such as decoherence. Here we demonstrate quantum metrology for noisy channels such that entanglement with ancillary qubits enhances the quantum Fisher information for phase estimation but not otherwise. Our photonic experiment covers a range of noise for various types of channels, including for two randomly alternating channels such that assisted entanglement fails for each noisy channel individually. We simulate noisy channels by implementing space-multiplexed dual interferometers with quantum photonic inputs. We demonstrate the advantage of entanglement-assisted protocols in a phase estimation experiment run with either a single-probe or multiprobe approach. These results establish that entanglement with ancillae is a valuable approach for delivering quantum-enhanced metrology. Our approach to entanglement-assisted quantum metrology via a simple linear-optical interferometric network with easy-to-prepare photonic inputs provides a path towards practical quantum metrology.
For phase estimation using qubits, we show that for some noise channels, the optimal entanglement-assisted strategy depends on the noise level. We note that there is a nontrivial crossover between the parallel-entangled strategy and the ancilla-assisted strategy: in the former the probes are all entangled; in the latter the probes are entangled with a noiseless ancilla but not among themselves. The transition can be explained by the fact that separable states are more robust against noise and therefore are optimal in the high-noise limit, but they are in turn outperformed by ancilla-assisted ones.
We report an experimental investigation of the role of measurement in quantum metrology when the states of the probes are mixed. In particular, we investigate optimized local measurements and general global projective measurements, involving entangling operations, of noisy Werner states of polarization entangled photons. We demonstrate experimentally that global measurement presents an advantage in parameter estimation with respect to the optimized local strategy. Moreover, the global strategy provides unambiguous information about the parameter of interest even when the amount of noise is not well characterized. This shows that the coherence in quantum operations, such as the Bell-state projection device used in our protocol, can be used to further boost the quantum advantage in metrology and play a fundamental role in the design of future quantum measurement devices.
A generic qubit unitary operator affected by quantum noise is duplicated and inserted in a coherently superposed channel, superposing two paths offered to a probe qubit across the noisy unitary, and driven by a control qubit. A characterization is performed of the transformation realized by the superposed channel on the joint state of the probe-control qubit pair. The superposed channel is then specifically analyzed for the fundamental metrological task of phase estimation on the noisy unitary, with the performance assessed by the Fisher information, classical or quantum. A comparison is made with conventional estimation techniques and also with a quantum switched channel with indefinite causal order recently investigated for a similar task of phase estimation. In the analysis here, a first important observation is that the control qubit of the superposed channel, although it never directly interacts with the unitary being estimated, can nevertheless be measured alone for effective estimation, while discarding the probe qubit that interacts with the unitary. This property is also present with the switched channel but is inaccessible with conventional techniques. The optimal measurement of the control qubit here is characterized in general conditions. A second important observation is that the noise plays an essential role in coupling the control qubit to the unitary, and that the control qubit remains operative for phase estimation at very strong noise, even with a fully depolarizing noise, whereas conventional estimation and the switched channel become inoperative in these conditions. The results extend the analysis of the capabilities of coherently controlled channels which represent novel devices exploitable for quantum signal and information processing.
The sensitivity in optical interferometry is strongly affected by losses during the signal propagation or at the detection stage. The optimal quantum states of the probing signals in the presence of loss were recently found. However, in many cases of practical interest, their associated accuracy is worse than the one obtainable without employing quantum resources (e.g., entanglement and squeezing) but neglecting the detector's loss. Here, we detail an experiment that can reach the latter even in the presence of imperfect detectors: it employs a phase-sensitive amplification of the signals after the phase sensing, before the detection. We experimentally demonstrated the feasibility of a phase estimation experiment able to reach its optimal working regime. Since our method uses coherent states as input signals, it is a practical technique that can be used for high-sensitivity interferometry and, in contrast to the optimal strategies, does not require one to have an exact characterization of the loss beforehand.