The optomechanics can generate fantastic effects of optics due to appropriate mechanical control. Here we theoretically study effects of slow and fast lights in a single-sided optomechanical cavity with an external force. The force-induced transparency of slow and fast lights and the force-dependent conversion between the slow and fast lights result from effects of the rotating-wave approximation (RWA) and the anti-RWA, which can be controlled by properly modifying the effective cavity frequency due to the external force. These force-induced phenomena can be applied to control the light group velocity and to detect the force variation, which are feasible using current laboratory techniques.
The optomechanics can generate fantastic effects of optics due to appropriate mechanical control. Here we theoretically study effects of slow and fast lights in a single-sided optomechanical cavity with an external force. The force-induced transparency of slow and fast lights and the force-dependent conversion between the slow and fast lights result from effects of the rotating-wave approximation (RWA) and the anti-RWA, which can be controlled by properly modifying the effective cavity frequency due to the external force. These force-induced phenomena can be applied to control the light group velocity and to detect the force variation, which are feasible using current laboratory techniques.
We theoretically investigate the optomechanically induced transparency (OMIT) phenomenon and the fast and slow light effects of a four-mode optomechanical system with the Kerr medium. The optomechanical system is composed of an array of three single-mode cavities and a mechanical oscillator. The three cavities are a passive cavity, a no-loss-gain cavity and a gain optical cavity, respectively. A Kerr medium is inserted in the passive cavity. We study the influence of the Kerr medium on the stability of the optomechanical system, and find that the stable regime of the optomechanical system can be adjusted by changing the Kerr coefficient. We demonstrate that the phenomenon of optomechanically induced transparency will appear when the Kerr medium exists in the optomechanical system and find that the frequency position of the absorption peak on the left increases linearly with the Kerr coefficient. In addition, we also investigate the fast and slow light effects in this system. The results show that we can control the fast and slow light by adjusting the Kerr coefficient, tunneling strength, and driving field strength. This study has potential application prospects in the fields of quantum optical devices and quantum information processing.
Abstract Slow light propagation is an important phenomenon in quantum optics. Here, we theoretically study the properties of slow light in a simple optomechanical system considering an effect of non-rotating wave approximation (NRWA) that was ignored in previous related works. With the NRWA effect, the ultraslow light can be easily achieved at the window of optomechanically induced transparency, especially in unresolved sideband regime. From the theoretical results, we find the upper bound of the time delay is exactly the mechanical ringdown time which can last for several minutes (mHz linewidth) in recent experiments. Additionally, the interesting phenomena of the perfect optomechanically induced transmission and absorption are studied in the system with the NRWA effect. We believe the results can be used to control optical transmission in modern optical networks.
Cavity optomechanics has enabled slow-to-fast light conversion, but traditional optomechanic systems suffer from limited tunability due to fixed mechanical frequencies. To address this constraint, we introduce a magnon degree of freedom into an optomechanical system, constructing a system that integrates photons, phonons, and magnons. We establish the theoretical model of the optomagnonic-Laguerre-Gaussian rotational system, and present numerical simulations of Fano resonances and group delay. By manipulating the magnon degree of freedom, we not only achieve slow-to-fast light conversion associated with magnons but also successfully realize such conversion effects associated with mechanical rotation-this achievement effectively overcomes the inherent tunability limitations of pure optomechanical systems and expands the frequency coverage of light conversion effects. Notably, we numerically demonstrate bidirectional light speed conversion (slow-to-fast and fast-to-slow) via continuous control field frequency modulation to tune cavity mode detuning. Additionally, our results show that adjusting optomagnonic parameters enables dynamic switching between slow light and fast light at multiple frequencies. This work provides a flexible platform for multi-frequency light speed control, with potential applications in all-optical networks and quantum communications.
In recent years, due to the rapid development of nano science and advanced semiconductor technology, one is able to observe more significant quantum optomechanical effects as optomechanical system turns smaller in size. Optomechanically induced transparency, fast and slow light, optical storage as well as other quantum optical and nonlinear optical effects have become the focus of research. On the other hand, the optomechanical systems coupled to other small subsystems (such as atoms, quantum dots, single electron transistors, etc.) also attract great attention in research. This is because the coupling system has not only provided more degrees of freedom for quantum manipulation, but also opened up more channels for classical and quantum information transfer. In this paper we study the optomechanically induced transparency and fast/slow light phase control in atom-assisted optomechanical cavity. Unlike the traditional systems, in this model the mechanical resonator is directly driven by a weak auxiliary driving field. We therefore find that with the change of amplitude ratio and phase difference between the auxiliary driving field and the probe field, the absorption and dispersion properties of the whole system and the group delay time vary accordingly. In the absence of auxiliary field, we observe the spectral features of the hybrid electromagnetically induced transparency and optomechanically induced transparency (OMIT) in an atom-cavity-oscillator tripartite optomechanical system. When there exists no phase difference between the auxiliary field and the probe field, we find that the membrane resonance absorption is enhanced with the increase of auxiliary field strength at resonance, causing the the optomechanically induced transparency to be suppressed, and therefore we can modify the amplitude of auxiliary field to control the depth of the OMIT window. When keeping amplitude ratio between the auxiliary field and the probe field unchanged, the modification of the phase difference between the auxiliary field and the probe field directly affects the we can not only realize the manipulation of OMIT window depth, but also control the transformation of tunable optical switch among "absorption", "transparent" and "gain" of the system. Therefore, through changing the phase of auxiliary field and probe field, we can not only realize the manipulation of OMIT window depth, but also control the transformation of tunable optical switch among "absorption" , "transparent" and "gain". In the meantime, we find that the system’s group delay time varies periodically with the change of phase difference. It is worth noting that by adjusting the phase difference and the atomic number, we can not only change the magnitude of the group delay, but also realize the conversion between slow light and fast light effect.
Abstract We investigate the phenomenon of optomechanically induced transparency assisted by a hybrid two-cavity optomechanical system. The system consists of two optical cavities and four mechanical resonators, and each optical cavity is filled with two-level atomic ensembles. Our study demonstrates that the characteristics of optomechanically induced transparency vary with different coupling parameters. Specifically, the number of transparent windows increases with the introduction of atomic ensembles and Coulomb interaction. Furthermore, the positions of the transparent points can be manipulated by the coupling parameters. It is found that increasing the Coulomb coupling between mechanical oscillators shifts the transparent points further apart. Furthermore, we also explore the slow/fast light effect by analyzing the phase and group delay of the probe field. Our approach enables the control of multiple optomechanically induced transparency and provides potential applications in quantum information processing.
We study optomechanically induced amplification and perfect transparency in a double-cavity optomechanical system. We find that if two control lasers with appropriate amplitudes and detunings are applied to drive the system, optomechanically induced amplification of a probe laser can occur. In addition, perfect optomechanically induced transparency, which is robust to mechanical dissipation, can be realized by the same type of driving. These results indicate important progress toward signal amplification, light storage, fast light, and slow light in quantum information processes.