We develop a novel concept of a Josephson traveling-wave parametric amplifier with three-wave mixing. The proposed amplifier consists of a microwave transmission line formed by a serial array of nonhysteretic one-junction SQUIDs. These SQUIDs are flux-biased such that the phase drops across the Josephson junctions are equal to 90°. This one-dimensional metamaterial possesses large quadratic nonlinearity and minimal cubic (Kerr-like) nonlinearity. This property allows phase matching and exponential power gain in a wide frequency range. The proof-of-principle measurements performed at temperature T = 4.2 K on Nb trilayer samples have demonstrated the validity of our concept of a practical Josephson parametric amplifier with great promise for quantum-limited performance.
We develop a novel concept of a Josephson traveling-wave parametric amplifier with three-wave mixing. The proposed amplifier consists of a microwave transmission line formed by a serial array of nonhysteretic one-junction SQUIDs. These SQUIDs are flux-biased such that the phase drops across the Josephson junctions are equal to 90°. This one-dimensional metamaterial possesses large quadratic nonlinearity and minimal cubic (Kerr-like) nonlinearity. This property allows phase matching and exponential power gain in a wide frequency range. The proof-of-principle measurements performed at temperature T = 4.2 K on Nb trilayer samples have demonstrated the validity of our concept of a practical Josephson parametric amplifier with great promise for quantum-limited performance.
We develop a concept of traveling-wave Josephson parametric amplifier based on a ladder-type superconducting transmission line containing serial array of one-junctions SQUIDs. The circuit operates in a three-wave mixing mode and exploits both quadratic and cubic (Kerr) nonlinearities in the current-phase relation of the SQUIDs controlled by external magnetic flux. These two types of nonlinearities allow efficient three-wave mixing and perfect phase matching, respectively. The transmission line exhibits a power gain with exponential dependence on its length (number of cells N) in the widest frequency range, 0≲fs,fi≲fp, where fs, fi and fp are the signal, idler and pump frequencies, respectively, obeying relation fs+fi=fp. Estimation of the amplifier characteristics with typical experimental parameters, number of cells N = 700, length of 28 mm and pump frequency of 12.5 GHz yields a flat (-3 dB) gain of about 20 dB in the bandwidth from 3.35 GHz to 9.15 GHz and a saturation power of -90 dBm.
We have developed a concept of the traveling-wave parametric amplifier driven by external magnetic flux. The circuit consists of a serial array of symmetric dc SQUIDs coupled inductively to a separate superconducting LC-transmission line carrying the pump flux-wave. The adjusted phase velocity of the pump wave ensures efficient three wave mixing with the signal and the idler waves. Due to operation in the linear regime of the SQUIDs the matching condition for corresponding wave vectors can be fulfilled in this circuit with sufficiently high accuracy. This property enables large gain and wide bandwidth, whereas inherently minimal depletion of the pump ensures a large dynamic range. The experimental parameters and characteristics of this amplifier have been evaluated and shown great promise for the application in quantum information circuits.
Abstract A Josephson traveling-wave parametric amplifier (JTWPA) is indispensable for the high-fidelity readout of superconducting qubits, owing to its broadband gain and near-quantum-limited noise performance. Conventional JTWPAs implemented with 0-Josephson junctions (0-JTWPAs) avoid magnetic-flux bias but rely on Kerr nonlinearity, which leads to pump-power-dependent phase mismatch, gain ripple, and a limited dynamic range. More recently, three-wave-mixing (3WM) JTWPAs employing flux-biased rf-SQUIDs have been proposed to suppress Kerr effects. However, these designs require a significant external flux bias per unit cell, which complicates cryogenic hardware, introduces sensitivity to flux noise, and limits scalability in large arrays. In this study, we propose and analyze a π -junction-based JTWPA ( π -JTWPA) in which the intrinsic π phase shift of the junction effectively displaces the operating point of the current–phase relation. This approach aims to realize 3WM-type nonlinearity with reduced flux bias while preserving broadband amplification, thereby simplifying flux-bias distribution, enhancing robustness against flux noise, and providing a pathway toward scalable, multiplexed quantum readout architectures. In addition, we examine the potential applicability of the π -JTWPA in four-wave-mixing (4WM) operation.
We develop the concept of quasi-phasematching (QPM) by implementing it in the recently proposed Josephson traveling-wave parametric amplifier (JTWPA) with three-wave mixing (3WM). The amplifier is based on a ladder transmission line consisting of flux-biased radio frequency superconducting quantum interference devices (SQUIDs) whose nonlinearity is of χ(2)-type. QPM is achieved in the 3WM process, ωp=ωs+ωi (where ωp, ωs, and ωi are the pump, signal, and idler frequencies, respectively) due to designing the JTWPA to include periodically inverted groups of these SQUIDs that reverse the sign of the nonlinearity. Modeling shows that the JTWPA bandwidth is relatively large (∼ 0.4ωp) and flat, while unwanted modes, including ω2p=2ωp, ω+=ωp+ωs, and ω−=2ωp−ωs, are strongly suppressed with the help of engineered dispersion.
We introduce a transparency-engineered rf-SQUID cell for Kerr-free three-wave-mixing Josephson metamaterials. This design replaces the conventional tunnel-junction element with an effective Josephson element formed by two junctions in series, yielding a non-sinusoidal energy-phase relation that can be used as a tunable nonlinear design resource. We show that the asymmetry between the two series junctions and the applied flux bias provide independent control over the local expansion of the rf-SQUID potential, enabling operating points where the leading quartic Kerr term is suppressed while the cubic nonlinearity remains finite. We derive the corresponding Kerr-free condition, identify the resulting operating ridge in parameter space, and analyze the local stability and passive-matching constraints that bound its physically accessible portion. Our results provide a compact unit-cell design principle for three-wave-mixing Josephson metamaterials and suggest a route toward Kerr-suppressed Josephson traveling-wave parametric amplifiers.
Investigating the χ(3) Nonlinearity of a Josephson Junction Array for Travelling-Wave Parametric Amplification in the W-Band
At microwave frequencies, Josephson junction arrays have been widely employed to create metamaterials exhibiting a third-order (χ(3)) nonlinearity, analogous to the Kerr effect in optics. These nonlinear metamaterials enable parametric amplification, as in Josephson Travelling-Wave Parametric Amplifiers (JTWPAs), which achieve quantum-limited noise performance over multi-gigahertz bandwidths. The exceptional properties of JTWPAs make them ideal for the sensitive readout of weak microwave signals, with applications in quantum computing, astrophysics, and fundamental physics experiments. Extending JTWPAs to higher frequencies, such as the W-band (70–110 GHz), holds promise for first-stage amplification in astronomical receivers, lowering system noise; as well as for reading out emerging superconducting qubit architectures at these frequencies. In this work, we investigate theχ(3)nonlinear properties of Josephson arrays operating in the W-band as a step toward realising parametric gain at these frequencies. We designed and fabricated an array composed of 704 Nb/Al-AlOx/Nb tunnel junctions and experimentally demonstrated four-wave mixing via idler tone generation, providing clear evidence of third-order nonlinearity. These results mark an important step toward novel millimetre-wave and sub-millimetre-wave parametric-amplifier-based receiver technologies.