Abstract Quantum key distribution allows for the generation of a secret key between distant parties connected by a quantum channel such as optical fibre or free space. Unfortunately, the rate of generation of a secret key by direct transmission is fundamentally limited by the distance. This limit can be overcome by the implementation of so-called quantum repeaters. Here, we assess the performance of a specific but very natural setup called a single sequential repeater for quantum key distribution. We offer a fine-grained assessment of the repeater by introducing a series of benchmarks . The benchmarks, which should be surpassed to claim a working repeater, are based on finite-energy considerations, thermal noise and the losses in the setup. In order to boost the performance of the studied repeaters we introduce two methods. The first one corresponds to the concept of a cut-off , which reduces the effect of decoherence during the storage of a quantum state by introducing a maximum storage time. Secondly, we supplement the standard classical post-processing with an advantage distillation procedure. Using these methods, we find realistic parameters for which it is possible to achieve rates greater than each of the benchmarks, guiding the way towards implementing quantum repeaters.
Abstract Quantum key distribution allows for the generation of a secret key between distant parties connected by a quantum channel such as optical fibre or free space. Unfortunately, the rate of generation of a secret key by direct transmission is fundamentally limited by the distance. This limit can be overcome by the implementation of so-called quantum repeaters. Here, we assess the performance of a specific but very natural setup called a single sequential repeater for quantum key distribution. We offer a fine-grained assessment of the repeater by introducing a series of benchmarks . The benchmarks, which should be surpassed to claim a working repeater, are based on finite-energy considerations, thermal noise and the losses in the setup. In order to boost the performance of the studied repeaters we introduce two methods. The first one corresponds to the concept of a cut-off , which reduces the effect of decoherence during the storage of a quantum state by introducing a maximum storage time. Secondly, we supplement the standard classical post-processing with an advantage distillation procedure. Using these methods, we find realistic parameters for which it is possible to achieve rates greater than each of the benchmarks, guiding the way towards implementing quantum repeaters.
Quantum key distribution allows for the generation of a secret key between distant parties connected by a quantum channel such as optical fibre or free space. Unfortunately, the rate of generation of a secret key by direct transmission is fundamentally limited by the distance. This limit can be overcome by the implementation of so-called quantum repeaters. Here, we assess the performance of a specific but very natural setup called a single sequential repeater for quantum key distribution. We offer a fine-grained assessment of the repeater by introducing a series of benchmarks. The benchmarks, which should be surpassed to claim a working repeater, are based on finite-energy considerations, thermal noise and the losses in the setup. In order to boost the performance of the studied repeaters we introduce two methods. The first one corresponds to the concept of a cut-off, which reduces the effect of decoherence during storage of a quantum state by introducing a maximum storage time. Secondly, we supplement the standard classical post-processing with an advantage distillation procedure. Using these methods, we find realistic parameters for which it is possible to achieve rates greater than each of the benchmarks, guiding the way towards implementing quantum repeaters.
Quantum key distribution allows for the generation of a secret key between distant parties connected by a quantum channel such as optical fibre or free space. Unfortunately, the rate of generation of a secret key by direct transmission is fundamentally limited by the distance. This limit can be overcome by the implementation of so-called quantum repeaters. Here, we assess the performance of a specific but very natural setup called a single sequential repeater for quantum key distribution. We offer a fine-grained assessment of the repeater by introducing a series of benchmarks. The benchmarks, which should be surpassed to claim a working repeater, are based on finite-energy considerations, thermal noise and the losses in the setup. In order to boost the performance of the studied repeaters we introduce two methods. The first one corresponds to the concept of a cut-off, which reduces the effect of decoherence during the storage of a quantum state by introducing a maximum storage time. Secondly, we supplement the standard classical post-processing with an advantage distillation procedure. Using these methods, we find realistic parameters for which it is possible to achieve rates greater than each of the benchmarks, guiding the way towards implementing quantum repeaters.
Quantum communication enables the implementation of tasks that are unachievable with classical resources. However, losses on the communication channel preclude the direct long-distance transmission of quantum information in many relevant scenarios. In principle, quantum repeaters allow one to overcome losses. However, realistic hardware parameters make long-distance quantum communication a challenge in practice. For instance, in many protocols an entangled pair is generated that needs to wait in quantum memory until the generation of an additional pair. During this waiting time the first pair decoheres, impacting the quality of the final entanglement produced. At the cost of a lower rate, this effect can be mitigated by imposing a cutoff condition. For instance, a maximum storage time for entanglement after which it is discarded. In this article, we optimize the cutoffs for quantum repeater chains. First, we develop an algorithm for computing the probability distribution of the waiting time and fidelity of entanglement produced by repeater chain protocols which include a cutoff. Then, we use the algorithm to optimize cutoffs in order to maximize the secret-key rate between the end nodes of the repeater chain. In this article, we find that the use of the optimal cutoff extends the parameter regime for which secret key can be generated and, moreover, significantly increases the secret-key rate for a large range of parameters.
This thesis assesses the theoretical performance of a realistic multi-node quantum repeater that is implementable with current technology. A quantum repeater, by definition, allows for communication rates in a channel to be larger than what is fundamentally possible over a loss only channel. We consider a simple, one-way, multi-node quantum repeater that utilizes entanglement swapping in the absence of any quantum error correction or entanglement purification. We create a theoretical model of the quantum repeater, incorporating the imperfections of each component within the system, to get an accurate key rate using current, viable state-of-the-art experimental parameters. Our main goal is to benchmark the performance of this specific multi-node quantum repeater. We compare the performance of this multi-node system to that of a single node repeater, which has been previously analysed for this architecture. We are interested to see if there is an advantage for introducing more nodes in this type of system. We also provide some suggestions for improving the key rate performance.
This thesis is an exploration of quantum repeaters from a practical point of view. Quantum repeaters are devices which help improve the quantum communication capacity of a lossy bosonic channel (which include photonic channels such as optical fiber) beyond what is possible using a purely lossy channel. The analyses in this thesis involve modeling the experimental imperfections inherent in the various devices which comprise a quantum repeater, then combining these models to calculate various quantities of interest. \n \nTwo systems are analyzed in this thesis. One is a simple quantum repeater, while the other is a potential building block for more complex quantum repeaters. \n \nThe simple quantum repeater scheme can be implemented with currently available technology. In it, two parties perform quantum key distribution (QKD) by exchanging photons with two quantum memories placed between them. Its secret key rate ideally scales as the square root of the transmittivity of the optical channel, which is superior to QKD schemes based on direct transmission because key rates for the latter scale at best linearly with transmittivity. Taking into account imperfections in the setup, such as detector efficiency and dark counts, we present parameter regimes in which our protocol outperforms protocols based on direct transmission. We find that implementing our scheme with trapped ions is a promising way to reach the necessary parameter regimes, and that the regimes are easier to reach if the optical channels are very lossy. \n \nThe creation of entanglement between two quantum memories is an important building block in some quantum repeater schemes. We consider a specific quantum memory consisting of an atom trapped in a cavity. The system allows a CNOT operation to be performed between an atom and a photon. We study three methods for taking advantage of this to entangle two atoms: (1) interacting a coherent pulse with each atom, then performing an entangling measurement on the pulses; (2) interacting a single coherent pulse with each atom sequentially; (3) emitting an entangled photon from one atom and interacting it with the other atom. The success probability of each method is compared, as well as the quality of the entangled states produced by each one, taking into account imperfections which appear in a specific experimental implementation of such memories. We find that there is a tradeoff between success probability and entangled state quality when coherent states are used, and that method 3 provides higher-quality entangled states than is possible with the other two methods.
Quantum communications promise to provide information theoretic security in the exchange of information. However, unlike their classical counterpart, they utilise dim optical pulses whose amplification is prohibited. Consequently, their transmission rate and range is confined below a theoretical limit known as repeaterless secret key capacity. Overcoming this limit with today’s technology was believed to be impossible until the recent proposal of Twin-field (TF) quantum key distribution (QKD), a scheme that uses phase-coherent optical signals and an auxiliary measuring station to distribute quantum information. Here, TF-QKD and its main variations are initially explored and compared in simulations, to assess their performance in different attributes. Such schemes are also practically implemented for the first time in two experiments. The first is a proof-of-principle implementation over significant channel losses, in excess of 90 dB. In the second, the setup is developed further and the protocol is implemented over real fibre channels exceeding 600 km in length, representing the first fibre-based secure quantum communication beyond the barriers of 600 km and 100 dB. In both cases, in the high loss/distance regime, the resulting secure key rates exceed the repeaterless secret key capacity, a result never achieved before.