Optimization of the fidelity of control operations is of critical importance in the pursuit of fault-tolerant quantum computation. We apply optimal control techniques to demonstrate that a single drive via the cavity in circuit quantum electrodynamics can implement a high-fidelity two-qubit all-microwave gate that directly entangles the qubits via the mutual qubit-cavity couplings. This is performed by driving at one of the qubits' frequencies which generates a conditional two-qubit gate, but will also generate other spurious interactions. These optimal control techniques are used to find pulse shapes that can perform this two-qubit gate with high fidelity, robust against errors in the system parameters. The simulations were all performed using experimentally relevant parameters and constraints.
Optimization of the fidelity of control operations is of critical importance in the pursuit of fault-tolerant quantum computation. We apply optimal control techniques to demonstrate that a single drive via the cavity in circuit quantum electrodynamics can implement a high-fidelity two-qubit all-microwave gate that directly entangles the qubits via the mutual qubit-cavity couplings. This is performed by driving at one of the qubits' frequencies which generates a conditional two-qubit gate, but will also generate other spurious interactions. These optimal control techniques are used to find pulse shapes that can perform this two-qubit gate with high fidelity, robust against errors in the system parameters. The simulations were all performed using experimentally relevant parameters and constraints.
Superconducting circuits are one of the leading architectures in quantum computing. To undertake quantum computing one must be able to perform quantum gates; however, two-qubit gates are still limited in fidelity and gate time. The cross-resonance gate is a two-qubit gate that uses direct microwave drives and has seen much success in its implementation; but, there are theoretical indications that it has not yet reached the coherence limited fidelity value and its gate time is still relatively long compared with other quantum gate methods. Quantum optimal control theory is a powerful tool in the design of controls for quantum operations and has shown the capability to improve gate fidelities and reduce gate times. Robust quantum optimal control methodologies have further built on this to develop high fidelity quantum gates that are robust to uncertainties and noise in the system. In this thesis we use robust quantum optimal control theory to achieve these goals for the cross-resonance gate in a variety of superconducting qubit architectures. First, we investigate two superconducting qubits embedded in a common 3D microwave cavity in which the control drive is implemented via the common cavity mode of the cavity. We determine pulse shapes that implement the cross-resonance gate that are robust to uncertainty in the qubit transition frequencies for both a strictly two-level superconducting qubit and a three-level qubit. Second, we look at the cross-resonance gate with direct drives on each qubit, finding the minimal time to perform the cross-resonance gate with pulses that are robust to uncertainty in a measured system parameter for three cases: two three-level qubits with no drive crosstalk, two three-level qubits with some drive crosstalk, and two two-level qubits. Lastly, we report on simulations undertaken towards implementing a robust, high fidelity cross-resonance gate in a novel superconducting quantum device known as the coaxmon.
Optimal control can be used to significantly improve multi-qubit gates in quantum information processing hardware architectures based on superconducting circuit quantum electrodynamics. We apply this approach not only to dispersive gates of two qubits inside a cavity, but, more generally, to architectures based on two-dimensional (2D) arrays of cavities and qubits. For high-fidelity gate operations, simultaneous evolutions of controls and couplings in the two coupling dimensions of cavity grids are shown to be significantly faster than conventional sequential implementations. Even under experimentally realistic conditions speedups by a factor of three can be gained. The methods immediately scale to large grids and indirect gates between arbitrary pairs of qubits on the grid. They are anticipated to be paradigmatic for 2D arrays and lattices of controllable qubits.
Abstract Soft quantum control is a valid technique for highly selective interactions recently illustrated in Haase et al (2018 Phys. Rev. Lett. 121 050402), holding efficient resonant couplings among target levels while largely suppressing unwanted off-resonant contributions. Here we present a model for implementing a controlled- Z (CZ) gate in superconducting circuit quantum electrodynamics (QED) with two qubits being coupled to a microwave cavity. An external classical field that drives only one qubit, combined with the strong single-mode quantized cavity field dressing both qubits, is employed to induce the CZ gate between two qubits, and is also further tailored as a Gaussian soft control (GSC) to improve gate performances in various aspects. By contrast, we show that, with the same gate time, the CZ gate based on GSC can hold a higher fidelity, greater resilience to parameter errors, and stronger robustness against decoherence of system than that based on a rectangular pulse.
Fault-tolerant quantum computing requires high-fidelity quantum gates that are resilient to control errors and device imperfections. Here, we develop energy-optimal control pulses for single-qubit gates that are simultaneously robust against frequency detuning and waveform inhomogeneities while also suppressing leakage outside the computational subspace. Combining the optimized pulse envelopes with an adaptive control scheme, we experimentally demonstrate optimal robust gates on a superconducting quantum processor. For a gate duration of 90ns, we achieve fidelities above 99.9% for the X gate and 99.6% for Hadamard-type gates. For the X gate, we maintain fidelities above 99.5% for simultaneous drive-amplitude variations up to 20% and qubit detuning up to 4 MHz. This robustness outperforms that of conventional Gaussian pulses by an order of magnitude, without much difference in peak gate fidelity. These results establish a route towards robust single-qubit control in large-scale quantum processors, advancing the development of fault-tolerant quantum computing.
Implementing high-fidelity multiqubit gates is critical for reducing circuit depth in near-term quantum processors and fault-tolerant architectures. However, realizing multiqubit interactions and entanglement remains a critical challenge that limits the implementation of multiqubit gates. Here we propose an all-microwave scheme to realize single-step multiqubit gates incorporating n control and m target qubits, tailored for frequency-tunable superconducting transmon networks. By leveraging cross-resonance (CR) drives, this approach induces effective two-body ZX interactions that are significantly stronger than those achieved in conventional resonant regimes, circumventing the need for tunable couplers. The system's effective Hamiltonian is analytically derived using both quad frame rotation and rigorous block diagonalization. These combined theoretical methods facilitate the identification of optimal parameter regimes that simultaneously enhance desired target couplings and suppress parasitic higher-order terms, such as ZXX interactions. Through numerical simulations and gradient-based pulse-shape optimization, we demonstrate three-qubit gates achieving fidelities exceeding 99.9% within a 60 ns gate duration. Furthermore, we evaluate the fundamental scalability of this framework by extending the optimization to a five-qubit CXXXX architecture, confirming the physical viability of the multi-target driving scheme. Because these multiqubit operations naturally emulate stabilizer measurements, this architecture provides a hardware-efficient strategy for reducing the circuit depth of stabilizer-type operations by replacing sequential two-qubit gate decompositions with single-step multiqubit gates.
Hybrid qubits have recently drawn intense attention in quantum computing. We here propose a method to implement a universal controlled-phase gate of two hybrid qubits via two three-dimensional (3D) microwave cavities coupled to a superconducting flux qutrit. For the gate considered here, the control qubit is a microwave photonic qubit (particle-like qubit), whose two logic states are encoded by the vacuum state and the single-photon state of a cavity, while the target qubit is a cat-state qubit (wave-like qubit), whose two logic states are encoded by the two orthogonal cat states of the other cavity. During the gate operation, the qutrit remains in the ground state; therefore, decoherence from the qutrit is greatly suppressed. The gate realization is quite simple, because only a single basic operation is employed and neither classical pulse nor measurement is used. Our numerical simulations demonstrate that with current circuit quantum electrodynamics technology, this gate can be realized with a high fidelity. The generality of this proposal allows implementing the proposed gate in a wide range of physical systems, such as two 1D or 3D microwave or optical cavities coupled to a natural or artificial three-level atom. Finally, this proposal can be applied to create a novel entangled state between a particle-like photonic qubit and a wave-like cat-state qubit.