A class of adaptive decoders (ADs) for coherent-state sequences is studied, including in particular the most common technology for optical-signal processing, e.g., interferometers, coherent displacements, and photon-counting detectors. More generally we consider ADs comprising adaptive procedures based on passive multimode Gaussian unitaries and arbitrary single-mode destructive measurements. For classical communication on quantum phase-insensitive Gaussian channels with a coherent-state encoding, we show that the AD's optimal information transmission rate is not greater than that of a single-mode decoder. Our result also implies that the ultimate classical capacity of quantum phase-insensitive Gaussian channels is unlikely to be achieved with the considered class of ADs.
A class of adaptive decoders (ADs) for coherent-state sequences is studied, including in particular the most common technology for optical-signal processing, e.g., interferometers, coherent displacements, and photon-counting detectors. More generally we consider ADs comprising adaptive procedures based on passive multimode Gaussian unitaries and arbitrary single-mode destructive measurements. For classical communication on quantum phase-insensitive Gaussian channels with a coherent-state encoding, we show that the AD's optimal information transmission rate is not greater than that of a single-mode decoder. Our result also implies that the ultimate classical capacity of quantum phase-insensitive Gaussian channels is unlikely to be achieved with the considered class of ADs.
We study the problem of decoding classical information encoded on quantum states at the output of a quantum channel, with particular focus on increasing the communication rates towards the maximum allowed by Quantum Mechanics. After a brief introduction to the main theoretical formalism employed in the rest of the thesis, i.e., continuous-variable Quantum Information Theory and Quantum Communication Theory, we consider several decoding schemes. First, we treat the problem from an abstract perspective, presenting a method to decompose any quantum measurement into a sequence of easier nested measurements through a binary-tree search. Furthermore we show that this decomposition can be used to build a capacity-achieving decoding protocol for classical communication on quantum channels and to solve the optimal discrimination of some sets of quantum states. These results clarify the structure of optimal quantum measurements, showing that it can be recast in a more operational and experimentally-oriented fashion. Second, we consider a more practical approach and describe three receiver structures for coherent states of the electromagnetic field with applications to single-mode state discrimination and multi-mode decoding at the output of a quantum channel. We treat the problem bearing in mind the technological limitations faced nowadays in the field of optical communications: we evaluate the performance of general decoding schemes based on such technology and report increased performance of two schemes, the first one employing a non-Gaussian transformation and the second one employing a code tailored to be read out easily by the most common detectors. Eventually we characterize a large class of multi-mode adaptive receivers based on common technological resources, obtaining a no-go theorem for their capacity.
A long-standing problem on the classical capacity of bosonic Gaussian channels has recently been resolved by proving the minimum output entropy conjecture. It is also known that the ultimate capacity quantified by the Holevo bound can be achieved asymptotically by using an infinite number of channels. However, it is less understood to what extent the communication capacity can be reached if one uses a finite number of channels, which is a topic of practical importance. In this paper, we study the capacity of Gaussian communication, i.e., employing Gaussian states and Gaussian measurements to encode and decode information under a single-channel use. We prove that the optimal capacity of single-channel Gaussian communication is achieved by one of two well-known protocols, i.e., coherent-state communication or squeezed-state communication, depending on the energy (number of photons) as well as the characteristics of the channel. Our result suggests that the coherent-state scheme known to achieve the ultimate information-theoretic capacity is not a practically optimal scheme for the case of using a finite number of channels. We find that overall the squeezed-state communication is optimal in a small-photon-number regime whereas the coherent-state communication performs better in a large-photon-number regime.
Laser-light (coherent-state) modulation is sufficient to achieve the ultimate (Holevo) capacity of classical communication over a lossy and noisy optical channel, but requires a receiver that jointly detects long modulated code words with highly nonlinear quantum operations, which are near-impossible to realize using current technology. We analyze the capacity of the lossy-noisy optical channel when the transmitter uses coherent-state modulation but the receiver is restricted to a general quantum-limited Gaussian receiver, i.e., one that may involve arbitrary combinations of Gaussian operations [passive linear optics: beam splitters and phase shifters; second-order nonlinear optics (or active linear optics): squeezers, along with homodyne or heterodyne detection measurements] and any amount of classical feedforward within the receiver. Under these assumptions, we show that the Gaussian receiver that attains the maximum mutual information is either homodyne detection, heterodyne detection, or time sharing between the two, depending upon the received power level. In other words, our result shows that to exceed the theoretical limit of conventional coherent optical communication, one has to incorporate non-Gaussian, i.e., third- or higher-order nonlinear operations in the receiver. Finally we compare our Gaussian receiver limit with experimentally feasible non-Gaussian receivers and show that in the regime of low received photon flux, it is possible to overcome the Gaussian receiver limit by relatively simple non-Gaussian receivers based on photon counting.
The classical capacity of a noisy optical channel is the maximum rate at which information can be transmitted reliably, given a constraint on the mean input energy. For the ubiquitous bosonic Gaussian channels, which include standard models of loss and noise in fibre and free-space optical links, determining this rate requires addressing whether entanglement between channel uses or non-Gaussian signals can outperform Gaussian encodings. More precisely, the question is whether the energy-constrained Holevo information is additive across arbitrarily many channel uses and coincides with its Gaussian counterpart. We answer these fundamental questions in the affirmative for every single-mode bosonic Gaussian channel at every input energy. Namely, we prove that independently prepared Gaussian states with Gaussian-distributed random displacements achieve the capacity, including in the low-energy regime where squeezing the signals competes with encoding information in their displacement. Our proof connects an entanglement inequality to a sharp, additive lower bound on output entropy. We then characterise communication above capacity: under a strict total photon-number cutoff, the probability of correct decoding decreases exponentially with the number of channel uses, and we derive explicit bounds on the decay exponent. When only the mean photon number is constrained, a simple energy-rescaling formula determines exactly the entire asymptotic rate--error trade-off: the capacity at mean photon number N and allowed average decoding error ε equals the vanishing-error capacity at mean photon number N/(1−ε). Together, these results identify the ultimate limits of classical communication for some of the most fundamental models of optical communication.
Laser-light (coherent-state) modulation is sufficient to achieve the ultimate (Holevo) capacity of classical communication over a lossy and noisy optical channel, but requires a receiver that jointly detects long modulated codewords with highly nonlinear quantum operations, which are near-impossible to realize using current technology. We analyze the capacity of the lossy-noisy optical channel when the transmitter uses coherent state modulation but the receiver is restricted to a general quantum-limited Gaussian receiver, i.e., one that may involve arbitrary combinations of Gaussian operations (passive linear optics: beamsplitters and phase-shifters, second order nonlinear process (squeezers), along with homodyne or heterodyne detection measurements) and any amount of classical feedforward within the receiver. Under these assumptions, we show that the Gaussian receiver that attains the maximum mutual information is either homodyne detection, heterodyne detection, or time sharing between the two, depending upon the received power level. In other words, our result shows that to exceed the theoretical limit of conventional coherent optical communications, one has to incorporate non-Gaussian (i.e. higher order nonlinear) operations in the receiver.
Optimization methods aimed at estimating the capacities of a general Gaussian channel are developed. Specifically evaluation of classical capacity as maximum of the Holevo information is pursued over all possible Gaussian encodings for the lossy bosonic channel, but extension to other capacities and other Gaussian channels seems feasible. Solutions for both memoryless and memory channels are presented. It is first dealt with single-use (single-mode) channel where the capacity dependence on channel's parameters is analyzed providing the full classification of possible cases. Then, it is dealt with multiple uses (multimode) channel where the capacity dependence on the (multimode) environment state is analyzed when both total environment energy and environment purity are fixed. This allows a fair comparison among different environments, thus understanding the role of memory (intermode correlations) and phenomenon like superadditivity of the capacity. The developed methods are also used for deriving transmission rates with heterodyne and homodyne measurements at the channel output. Classical capacity and transmission rates are presented within a unique framework where the rates can be treated as logarithmic approximations of the capacity.