Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1702.05687 · Optics Express

Engineering temporal-mode-selective frequency conversion in nonlinear optical waveguides: from theory to experiment

Dileep V. Reddy, Michael G. Raymer

Published May 25, 2017• 41 citations
arXivHTMLPDF

Abstract

Quantum frequency conversion (FC) in nonlinear optical media is a powerful tool for temporal-mode selective manipulation of light. Recent attempts at achieving high mode selectivities and/or fidelities have had to resort to multi-dimensional optimization schemes to determine the system's natural Schmidt modes. Certain combinations of relative-group velocities between the relevant frequency bands, medium length, and temporal pulse widths have been known to achieve good selectivities (exceeding 80%) for temporal modes that are nearly identical to pump pulse shapes, even for high conversion efficiencies. Working in this parameter regime using an off-the-shelf, second-harmonic generation, MgO:PPLN waveguide, and with pulses on the order of 500 fs at wavelengths around 800 nm, we verify experimentally that model-predicted Schmidt modes provide the high temporal-mode selectivity expected. The good agreement between experiment and theory paves the way to the implementation of a proposed two-stage FC scheme that is predicted by the present theory to reach near-perfect (100%) selectivity.

DOI
10.1364/oe.25.012952

Related papers

Temporal-mode interferometry: A technique for highly selective quantum pulse gating via cascaded frequency conversion in nonlinear optical waveguides

Dileep V. Reddy

A new, and thus far only, method to overcome a selectivity barrier in parametrically pumped quantum pulse gates is proposed and experimentally demonstrated for the first time, using frequency conversion of optical temporal modes in second-order nonlinear waveguides. Temporal modes and quantum pulse gates are defined and their utilities are explored. Pulsed operation of three-field and four-field, parametric, optical processes are modeled and numerically investigated. A maximum limit to achievable selectivity for quantum pulse gating in uniform media is discovered and theoretically explained. An interferometric means of overcoming said limit and asymptotically approaching unit selectivity is proposed. The principle is experimentally verified by double-passing specifically shaped optical pulses derived from an ultrafast Ti:sapphire laser through a periodically-poled lithium niobate waveguide phasematched for sum-frequency generation. Further improvements and future implications for quantum technologies are discussed.

•Apr 10, 2018•0 citations

Temporal mode selectivity by frequency conversion in second-order nonlinear optical waveguides

Dileep V. Reddy, Michael G. Raymer, Colin J. McKinstrie +2 more

We explore theoretically the feasibility of using frequency conversion by sum- or difference-frequency generation, enabled by three-wave-mixing, for selectively multiplexing orthogonal input waveforms that overlap in time and frequency. Such a process would enable a drop device for use in a transparent optical network using temporally orthogonal waveforms to encode different channels. We model the process using coupled-mode equations appropriate for wave mixing in a uniform second-order nonlinear optical medium pumped by a strong laser pulse. We find Green functions describing the process, and employ Schmidt (singular-value) decompositions thereof to quantify its viability in functioning as a coherent waveform discriminator. We define a selectivity figure of merit in terms of the Schmidt coefficients, and use it to compare and contrast various parameter regimes via extensive numerical computations. We identify the most favorable regime (at least in the case of no pump chirp) and derive the complete analytical solution for the same. We bound the maximum achievable selectivity in this parameter space. We show that including a frequency chirp in the pump does not improve selectivity in this optimal regime. We also find an operating regime in which high-efficiency frequency conversion without temporal-shape selectivity can be achieved while preserving the shapes of a wide class of input pulses. The results are applicable to both classical and quantum frequency conversion.

arXiv:1305.2165•Optics Express•May 31, 2013•60 citations

High-Efficiency Multiplexing of Quantum Information in Optical Temporal Modes

Michael G. Raymer, Dileep V. Reddy

Information can be encoded using temporal modes—sets of field-orthogonal wave- packet shapes. Using a two-stage frequency-conversion scheme in MgO:PPLN, we demonstrate improved mode selectivity for the first three natural (“Schmidt”) modes of the FC process.

Frontiers in Optics•Jan 1, 2018•0 citations

Temporal-mode-selective optical Ramsey interferometry via cascaded frequency conversion

Dileep V. Reddy, Michael G. Raymer

Temporal modes (TM) are a new basis for storage and retrieval of quantum information in states of light. The full TM manipulation toolkit requires a practical quantum pulse gate (QPG), which is a device that unitarily maps any given TM component of the optical input field onto a different, easily separable subspace or degree of freedom. An ideal QPG must "separate" the selected TM component with unit efficiency, whilst avoiding crosstalk from orthogonal TMs. All attempts at implementing QPGs in pulsed-pump traveling-wave systems have been unable to satisfy both conditions simultaneously. This is due to a known selectivity limit in processes that rely on spatio-temporally local, nonlinear interactions between pulsed modes traveling at independent group velocities. This limit is a consequence of time ordering in the quantum dynamical evolution, which is predicted to be overcome by coherently cascading multiple stages of low-efficiency, but highly TM-discriminatory QPGs. Multi-stage interferometric quantum frequency conversion in nonlinear waveguides was first proposed for precisely this purpose. TM-nonselective cascaded frequency conversion, also called optical Ramsey interferometry, has recently been demonstrated with continuous-wave (CW) fields. Here, we present the first experimental demonstration of TM-selective optical Ramsey interferometry and show a significant enhancement in TM selectivity over single-stage schemes.

arXiv:1710.06736•Oct 18, 2017•4 citations

Demonstration of coherent time-frequency Schmidt mode selection using dispersion-engineered frequency conversion

Benjamin Brecht, A. Eckstein, Raimund Ricken +4 more

Time-frequency Schmidt (TFS) modes of ultrafast quantum states are naturally compatible with high-bit-rate integrated quantum communication networks. Thus they offer an attractive alternative for the realization of high-dimensional quantum optics. Here, we present a quantum pulse gate based on dispersion-engineered ultrafast frequency conversion in a nonlinear optical waveguide, which is a key element for harnessing the potential of TFS modes. We experimentally retrieve the modal spectral-temporal structure of our device and demonstrate a single-mode operation fidelity of 80%, which is limited by experimental shortcomings. In addition, we retrieve a conversion efficiency of 87.7% with a high signal-to-noise ratio of 8.8 when operating the quantum pulse gate at the single-photon level.

arXiv:1403.4397•Physical Review A•Sep 12, 2014•114 citations

Sorting photon wave packets using temporal-mode interferometry based on multiple-stage quantum frequency conversion

Dileep V. Reddy, Michael G. Raymer, Colin J. McKinstrie

All classical and quantum technologies that encode in and retrieve information from optical fields rely on the ability to selectively manipulate orthogonal field modes of light. Such manipulation can be achieved with high selectivity for polarization modes and transverse-spatial modes. For the time-frequency degree of freedom, this could efficiently be achieved for a limited choice of approximately orthogonal modes, i.e., nonoverlapping bins in time or frequency. We recently proposed a method that surmounts the selectivity barrier for sorting arbitrary orthogonal temporal modes [Opt. Lett. 39, 2924 (2014).] using cascaded interferometric quantum frequency conversion in nonlinear optical media. We call this method temporal-mode interferometry, as it has a close resemblance to the well-known separated-fields atomic interferometry method introduced by Ramsey. The method has important implications for quantum memories, quantum dense coding, quantum teleportation, and quantum key distribution. Here we explore the inner workings of the method in detail, and extend it to multiple stages with a concurrent asymptotic convergence of temporal-mode selectivity to unity. We also complete our analysis of pump-chirp compensation to counter pump-induced nonlinear phase modulation in four-wave mixing implementations.

arXiv:1501.03216•Physical Review A•Jan 15, 2015•29 citations
Quantum frequency conversion (FC) in nonlinear optical media is a powerful tool for temporal-mode selective manipulation of light. Recent attempts at achieving high mode selectivities and/or fidelities have had to resort to multi-dimensional optimization schemes to determine the system's natural Schmidt modes. Certain combinations of relative-group velocities between the relevant frequency bands, medium length, and temporal pulse widths have been known to achieve good selectivities (exceeding 80%) for temporal modes that are nearly identical to pump pulse shapes, even for high conversion efficiencies. Working in this parameter regime using an off-the-shelf, second-harmonic generation, MgO:PPLN waveguide, and with pulses on the order of 500 fs at wavelengths around 800 nm, we verify experimentally that model-predicted Schmidt modes provide the high temporal-mode selectivity expected. The good agreement between experiment and theory paves the way to the implementation of a proposed two-stage FC scheme that is predicted by the present theory to reach near-perfect (100%) selectivity.
A new, and thus far only, method to overcome a selectivity barrier in parametrically pumped quantum pulse gates is proposed and experimentally demonstrated for the first time, using frequency conversion of optical temporal modes in second-order nonlinear waveguides. Temporal modes and quantum pulse gates are defined and their utilities are explored. Pulsed operation of three-field and four-field, parametric, optical processes are modeled and numerically investigated. A maximum limit to achievable selectivity for quantum pulse gating in uniform media is discovered and theoretically explained. An interferometric means of overcoming said limit and asymptotically approaching unit selectivity is proposed. The principle is experimentally verified by double-passing specifically shaped optical pulses derived from an ultrafast Ti:sapphire laser through a periodically-poled lithium niobate waveguide phasematched for sum-frequency generation. Further improvements and future implications for quantum technologies are discussed.
We explore theoretically the feasibility of using frequency conversion by sum- or difference-frequency generation, enabled by three-wave-mixing, for selectively multiplexing orthogonal input waveforms that overlap in time and frequency. Such a process would enable a drop device for use in a transparent optical network using temporally orthogonal waveforms to encode different channels. We model the process using coupled-mode equations appropriate for wave mixing in a uniform second-order nonlinear optical medium pumped by a strong laser pulse. We find Green functions describing the process, and employ Schmidt (singular-value) decompositions thereof to quantify its viability in functioning as a coherent waveform discriminator. We define a selectivity figure of merit in terms of the Schmidt coefficients, and use it to compare and contrast various parameter regimes via extensive numerical computations. We identify the most favorable regime (at least in the case of no pump chirp) and derive the complete analytical solution for the same. We bound the maximum achievable selectivity in this parameter space. We show that including a frequency chirp in the pump does not improve selectivity in this optimal regime. We also find an operating regime in which high-efficiency frequency conversion without temporal-shape selectivity can be achieved while preserving the shapes of a wide class of input pulses. The results are applicable to both classical and quantum frequency conversion.
Temporal modes (TM) are a new basis for storage and retrieval of quantum information in states of light. The full TM manipulation toolkit requires a practical quantum pulse gate (QPG), which is a device that unitarily maps any given TM component of the optical input field onto a different, easily separable subspace or degree of freedom. An ideal QPG must "separate" the selected TM component with unit efficiency, whilst avoiding crosstalk from orthogonal TMs. All attempts at implementing QPGs in pulsed-pump traveling-wave systems have been unable to satisfy both conditions simultaneously. This is due to a known selectivity limit in processes that rely on spatio-temporally local, nonlinear interactions between pulsed modes traveling at independent group velocities. This limit is a consequence of time ordering in the quantum dynamical evolution, which is predicted to be overcome by coherently cascading multiple stages of low-efficiency, but highly TM-discriminatory QPGs. Multi-stage interferometric quantum frequency conversion in nonlinear waveguides was first proposed for precisely this purpose. TM-nonselective cascaded frequency conversion, also called optical Ramsey interferometry, has recently been demonstrated with continuous-wave (CW) fields. Here, we present the first experimental demonstration of TM-selective optical Ramsey interferometry and show a significant enhancement in TM selectivity over single-stage schemes.
Time-frequency Schmidt (TFS) modes of ultrafast quantum states are naturally compatible with high-bit-rate integrated quantum communication networks. Thus they offer an attractive alternative for the realization of high-dimensional quantum optics. Here, we present a quantum pulse gate based on dispersion-engineered ultrafast frequency conversion in a nonlinear optical waveguide, which is a key element for harnessing the potential of TFS modes. We experimentally retrieve the modal spectral-temporal structure of our device and demonstrate a single-mode operation fidelity of 80%, which is limited by experimental shortcomings. In addition, we retrieve a conversion efficiency of 87.7% with a high signal-to-noise ratio of 8.8 when operating the quantum pulse gate at the single-photon level.
All classical and quantum technologies that encode in and retrieve information from optical fields rely on the ability to selectively manipulate orthogonal field modes of light. Such manipulation can be achieved with high selectivity for polarization modes and transverse-spatial modes. For the time-frequency degree of freedom, this could efficiently be achieved for a limited choice of approximately orthogonal modes, i.e., nonoverlapping bins in time or frequency. We recently proposed a method that surmounts the selectivity barrier for sorting arbitrary orthogonal temporal modes [Opt. Lett. 39, 2924 (2014).] using cascaded interferometric quantum frequency conversion in nonlinear optical media. We call this method temporal-mode interferometry, as it has a close resemblance to the well-known separated-fields atomic interferometry method introduced by Ramsey. The method has important implications for quantum memories, quantum dense coding, quantum teleportation, and quantum key distribution. Here we explore the inner workings of the method in detail, and extend it to multiple stages with a concurrent asymptotic convergence of temporal-mode selectivity to unity. We also complete our analysis of pump-chirp compensation to counter pump-induced nonlinear phase modulation in four-wave mixing implementations.