Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1702.01609 · Scientific Reports

Analyzing the Quantum Zeno and anti-Zeno effects using optimal projective measurements

Muhammad Junaid Aftab, Adam Zaman Chaudhry

Published Sep 12, 2017• 9 citations
arXivHTMLPDF

Abstract

Measurements in quantum mechanics can not only effectively freeze the quantum system (the quantum Zeno effect) but also accelerate the time evolution of the system (the quantum anti-Zeno effect). In studies of these effects, a quantum state is prepared repeatedly by projecting the quantum state onto the initial state. In this paper, we repeatedly prepare the initial quantum state in a different manner. Instead of only performing projective measurements, we allow unitary operations to be performed, on a very short time-scale, after each measurement. We can then repeatedly prepare the initial state by performing some projective measurement and then, after each measurement, we perform a suitable unitary operation to end up with the same initial state as before. Our objective is to find the projective measurements that minimize the effective decay rate of the quantum state. We find such optimal measurements and the corresponding decay rates for a variety of system-environment models such as the pure dephasing model and the spin-boson model. We find that there can be considerable differences between this optimized effective decay rate and the usual decay rate obtained by repeatedly projecting onto the initial state. In particular, the Zeno and anti-Zeno regimes can be considerably modified.

DOI
10.1038/s41598-017-11787-9

Related papers

The quantum Zeno and anti-Zeno effects with non-selective projective measurements

Mehwish Majeed, Adam Zaman Chaudhry

In studies of the quantum Zeno and anti-Zeno effects, it is usual to consider rapid projective measurements with equal time intervals being performed on the system to check whether or not the system is in the initial state. These projective measurements are selective measurements in the sense that the measurement results are read out and only the case where all the measurement results correspond to the initial state is considered in the analysis of the effect of the measurements. In this paper, we extend such a treatment to consider the effect of repeated non-selective projective measurements - only the final measurement is required to correspond to the initial state, while we do not know the results of the intermediate measurements. We present a general formalism to derive the effective decay rate of the initial quantum state with such nonselective measurements. Importantly, we show that there is a difference between using non-selective projective measurements and the usual approach of considering only selective measurements only if we go beyond the weak system-environment coupling regime in models other than the usual population decay models. As such, we then apply our formalism to investigate the quantum Zeno and anti-Zeno effects for three exactly solvable system-environment models: a single two-level system undergoing dephasing, a single two-level system interacting with an environment of two-level systems and a large spin undergoing dephasing. Our results show that the quantum Zeno and anti-Zeno effects in the presence of non-selective projective measurements can differ very significantly as compared to the repeated selective measurement scenario.

Scientific Reports•Oct 1, 2018•13 citations

The quantum Zeno and anti-Zeno effects with non-selective measurements

Mehwish Majeed, Adam Zaman Chaudhry

In studies of the quantum Zeno and anti-Zeno effects, it is usual to consider rapid projective measurements with equal time intervals being performed on the system to check whether or not the system is in the initial state. These projective measurements are selective measurements in the sense that the measurement results are read out and only the case where all the measurement results correspond to the initial state is considered in the analysis of the effect of the measurements. In this paper, we extend such a treatment to consider the effect of repeated non-selective measurements - only the final measurement is required to correspond to the initial state, while we do not know the results of the intermediate measurements. We present a general formalism to derive the effective decay rate of the initial quantum state with such non-selective measurements. Importantly, we show that there is a difference between using non-selective measurements and the usual approach of considering only selective measurements only if we go beyond the weak system-environment coupling regime in models other than the usual population decay models. As such, we then apply our formalism to investigate the quantum Zeno and anti-Zeno effects for three exactly solvable system-environment models: a single two-level system undergoing dephasing, a single two-level system interacting with an environment of two-level systems, and a large spin undergoing dephasing. Our results show that the quantum Zeno and anti-Zeno effects in the presence of non-selective measurements can differ very significantly as compared to the repeated selective measurement scenario.

arXiv:1808.08012•Aug 24, 2018•0 citations

A general framework for the Quantum Zeno and anti-Zeno effects

Adam Zaman Chaudhry

Repeated measurements can slow down (the quantum Zeno effect) or speed up (the quantum anti-Zeno effect) the temporal evolution of a quantum system. In this paper, a general treatment of the quantum Zeno and anti-Zeno effects is presented which is valid for an arbitrary system-environment model in the weak system-environment coupling regime. It is shown that the effective lifetime of a quantum state that is subjected to repeated projective measurements depends on the overlap of the spectral density of the environment and a generalized 'filter function'. This filter function depends on the system-environment Hamiltonian, the state of the environment, and the measurement being performed. Our general framework is then used to study explicitly the Zeno to anti-Zeno crossover behaviour for the spin-boson model where a single two-level system is coupled to a bosonic environment. It is possible to not only reproduce results for the usual population decay case as well as for the pure dephasing model, but to also study the regime where both decay and dephasing take place. These results are then extended to many two-level systems coupled collectively to the bosonic environment to further illustrate the importance of the correct evaluation of the effective decay rate.

Scientific Reports•Jul 13, 2016•48 citations

A general framework for the Quantum Zeno and anti-Zeno effects

Adam Zaman Chaudhry

A general treatment of the quantum Zeno and anti-Zeno effects is presented which is valid for an arbitrary system-environment model in the weak system-environment coupling regime. It is shown that the effective lifetime of a quantum state that is subjected to repeated projective measurements depends on the overlap of the spectral density of the environment and a generalized `filter function' which in turn depends on the system state that is repeatedly being prepared, the measurement interval, the system parameters, the system-environment coupling, and the environment correlation function. This general framework is then used to study explicitly the Zeno to anti-Zeno crossover behavior for the spin-boson model where a single two-level system is coupled to a bosonic environment. It is shown that our framework reproduces results for the usual population decay case as well as for the pure dephasing model, while at the same time allowing us to study the Zeno to anti-Zeno transition when both decay and dephasing take place. These results are then extended to many two-level systems coupled collectively to the bosonic environment to show that the distinction between the Zeno and anti-Zeno effects becomes more pronounced as the number of two-level systems increases.

arXiv:1604.06561•Apr 22, 2016•0 citations

A generalized framework for the quantum Zeno and anti-Zeno effects in the strong coupling regime

Ghazi Khan, Hudaiba Soomro, Muhammad Usman Baig +2 more

It is well known that repeated projective measurements can either slow down (the Zeno effect) or speed up (the anti-Zeno effect) quantum evolution. Until now, studies of these effects for a two-level system interacting with its environment have focused on repeatedly preparing the excited state via projective measurements. In this paper, we consider the repeated preparation of an arbitrary state of a two-level system that is interacting strongly with an environment of harmonic oscillators. To handle the strong interaction, we perform a polaron transformation and then use a perturbative approach to calculate the decay rates for the system. Upon calculating the decay rates, we discover that there is a transition in their qualitative behaviors as the state being repeatedly prepared continuously moves away from the excited state and toward a uniform superposition of the ground and excited states. Our results should be useful for the quantum control of a two-level system interacting with its environment.

Scientific Reports•Nov 4, 2022•0 citations

The quantum Zeno effect: a solvable model for indirect pre-measurements

Anil Shaji

A simple model of indirect pre-measurements on an unstable quantum state is presented in this paper. The model is completely solvable and the solutions are used to compare the time evolution of the unstable state with and without the influence of the pre-measurement. We find that by choosing the details of the process of pre-measurement appropriately, it is possible to observe both suppression and enhancement of the rate of decay of the unstable state. When the pre-measurements are assumed to lead on to actual measurements, we see that the quantum Zeno effect, and in some instances the 'anti-Zeno' effect, can be produced by repeating the measurement many times in succession. The Zeno effect can appear in our model either as a real consequence of repeated measurements or sometimes merely as an artefact of the manner in which the observations on the system are performed. The anti-Zeno effect appears almost exclusively as an artefact of the details of the measurement. Numerical investigations are included to delineate the regimes in which the quantum Zeno effect and possibly the anti-Zeno effect can occur.

Journal of Physics A Mathematical and General•Nov 4, 2004•4 citations
Measurements in quantum mechanics can not only effectively freeze the quantum system (the quantum Zeno effect) but also accelerate the time evolution of the system (the quantum anti-Zeno effect). In studies of these effects, a quantum state is prepared repeatedly by projecting the quantum state onto the initial state. In this paper, we repeatedly prepare the initial quantum state in a different manner. Instead of only performing projective measurements, we allow unitary operations to be performed, on a very short time-scale, after each measurement. We can then repeatedly prepare the initial state by performing some projective measurement and then, after each measurement, we perform a suitable unitary operation to end up with the same initial state as before. Our objective is to find the projective measurements that minimize the effective decay rate of the quantum state. We find such optimal measurements and the corresponding decay rates for a variety of system-environment models such as the pure dephasing model and the spin-boson model. We find that there can be considerable differences between this optimized effective decay rate and the usual decay rate obtained by repeatedly projecting onto the initial state. In particular, the Zeno and anti-Zeno regimes can be considerably modified.
In studies of the quantum Zeno and anti-Zeno effects, it is usual to consider rapid projective measurements with equal time intervals being performed on the system to check whether or not the system is in the initial state. These projective measurements are selective measurements in the sense that the measurement results are read out and only the case where all the measurement results correspond to the initial state is considered in the analysis of the effect of the measurements. In this paper, we extend such a treatment to consider the effect of repeated non-selective projective measurements - only the final measurement is required to correspond to the initial state, while we do not know the results of the intermediate measurements. We present a general formalism to derive the effective decay rate of the initial quantum state with such nonselective measurements. Importantly, we show that there is a difference between using non-selective projective measurements and the usual approach of considering only selective measurements only if we go beyond the weak system-environment coupling regime in models other than the usual population decay models. As such, we then apply our formalism to investigate the quantum Zeno and anti-Zeno effects for three exactly solvable system-environment models: a single two-level system undergoing dephasing, a single two-level system interacting with an environment of two-level systems and a large spin undergoing dephasing. Our results show that the quantum Zeno and anti-Zeno effects in the presence of non-selective projective measurements can differ very significantly as compared to the repeated selective measurement scenario.
In studies of the quantum Zeno and anti-Zeno effects, it is usual to consider rapid projective measurements with equal time intervals being performed on the system to check whether or not the system is in the initial state. These projective measurements are selective measurements in the sense that the measurement results are read out and only the case where all the measurement results correspond to the initial state is considered in the analysis of the effect of the measurements. In this paper, we extend such a treatment to consider the effect of repeated non-selective measurements - only the final measurement is required to correspond to the initial state, while we do not know the results of the intermediate measurements. We present a general formalism to derive the effective decay rate of the initial quantum state with such non-selective measurements. Importantly, we show that there is a difference between using non-selective measurements and the usual approach of considering only selective measurements only if we go beyond the weak system-environment coupling regime in models other than the usual population decay models. As such, we then apply our formalism to investigate the quantum Zeno and anti-Zeno effects for three exactly solvable system-environment models: a single two-level system undergoing dephasing, a single two-level system interacting with an environment of two-level systems, and a large spin undergoing dephasing. Our results show that the quantum Zeno and anti-Zeno effects in the presence of non-selective measurements can differ very significantly as compared to the repeated selective measurement scenario.
Repeated measurements can slow down (the quantum Zeno effect) or speed up (the quantum anti-Zeno effect) the temporal evolution of a quantum system. In this paper, a general treatment of the quantum Zeno and anti-Zeno effects is presented which is valid for an arbitrary system-environment model in the weak system-environment coupling regime. It is shown that the effective lifetime of a quantum state that is subjected to repeated projective measurements depends on the overlap of the spectral density of the environment and a generalized 'filter function'. This filter function depends on the system-environment Hamiltonian, the state of the environment, and the measurement being performed. Our general framework is then used to study explicitly the Zeno to anti-Zeno crossover behaviour for the spin-boson model where a single two-level system is coupled to a bosonic environment. It is possible to not only reproduce results for the usual population decay case as well as for the pure dephasing model, but to also study the regime where both decay and dephasing take place. These results are then extended to many two-level systems coupled collectively to the bosonic environment to further illustrate the importance of the correct evaluation of the effective decay rate.
A general treatment of the quantum Zeno and anti-Zeno effects is presented which is valid for an arbitrary system-environment model in the weak system-environment coupling regime. It is shown that the effective lifetime of a quantum state that is subjected to repeated projective measurements depends on the overlap of the spectral density of the environment and a generalized `filter function' which in turn depends on the system state that is repeatedly being prepared, the measurement interval, the system parameters, the system-environment coupling, and the environment correlation function. This general framework is then used to study explicitly the Zeno to anti-Zeno crossover behavior for the spin-boson model where a single two-level system is coupled to a bosonic environment. It is shown that our framework reproduces results for the usual population decay case as well as for the pure dephasing model, while at the same time allowing us to study the Zeno to anti-Zeno transition when both decay and dephasing take place. These results are then extended to many two-level systems coupled collectively to the bosonic environment to show that the distinction between the Zeno and anti-Zeno effects becomes more pronounced as the number of two-level systems increases.
It is well known that repeated projective measurements can either slow down (the Zeno effect) or speed up (the anti-Zeno effect) quantum evolution. Until now, studies of these effects for a two-level system interacting with its environment have focused on repeatedly preparing the excited state via projective measurements. In this paper, we consider the repeated preparation of an arbitrary state of a two-level system that is interacting strongly with an environment of harmonic oscillators. To handle the strong interaction, we perform a polaron transformation and then use a perturbative approach to calculate the decay rates for the system. Upon calculating the decay rates, we discover that there is a transition in their qualitative behaviors as the state being repeatedly prepared continuously moves away from the excited state and toward a uniform superposition of the ground and excited states. Our results should be useful for the quantum control of a two-level system interacting with its environment.
A simple model of indirect pre-measurements on an unstable quantum state is presented in this paper. The model is completely solvable and the solutions are used to compare the time evolution of the unstable state with and without the influence of the pre-measurement. We find that by choosing the details of the process of pre-measurement appropriately, it is possible to observe both suppression and enhancement of the rate of decay of the unstable state. When the pre-measurements are assumed to lead on to actual measurements, we see that the quantum Zeno effect, and in some instances the 'anti-Zeno' effect, can be produced by repeating the measurement many times in succession. The Zeno effect can appear in our model either as a real consequence of repeated measurements or sometimes merely as an artefact of the manner in which the observations on the system are performed. The anti-Zeno effect appears almost exclusively as an artefact of the details of the measurement. Numerical investigations are included to delineate the regimes in which the quantum Zeno effect and possibly the anti-Zeno effect can occur.