We present a $[[7,1,3]]$ quantum error-correcting code that is able to achieve fault-tolerant syndrome measurement using one ancillary qubit per stabilizer for an error model of independent single-qubit Pauli errors. All single-qubit Pauli errors on the ancillary qubits propagate to form exclusively correctable errors on the data qubits. The situation changes for error models with two-qubit Pauli errors. We compare the level-1 logical error rates under two noise models: the standard Pauli symmetric depolarizing error model and an anisotropic error model. The anisotropic model is motivated by control errors on two-qubit gates commonly applied to trapped ion qubits. We find that one ancillary qubit per syndrome measurement is sufficient for fault-tolerance for the anisotropic error, but is not sufficient for the standard depolarizing errors. We then show how to achieve fault tolerance for the standard depolarizing errors by adding flag qubits to check for errors on select ancillary qubits. Our results on this $[[7,1,3]]$ code demonstrates how physically motivated noise models may simplify fault-tolerant protocols.
We present a [[7,1,3]] quantum error-correcting code that is able to achieve fault-tolerant syndrome measurement using one ancillary qubit per stabilizer for an error model of independent single-qubit Pauli errors. All single-qubit Pauli errors on the ancillary qubits propagate to form exclusively correctable errors on the data qubits. The situation changes for error models with two-qubit Pauli errors. We compare the level-1 logical error rates under two noise models: the standard Pauli symmetric depolarizing error model and an anisotropic error model. The anisotropic model is motivated by control errors on two-qubit gates commonly applied to trapped ion qubits. We find that one ancillary qubit per syndrome measurement is sufficient for fault-tolerance for the anisotropic error, but is not sufficient for the standard depolarizing errors. We then show how to achieve fault tolerance for the standard depolarizing errors by adding flag qubits to check for errors on select ancillary qubits. Our results on this [[7,1,3]] code demonstrates how physically motivated noise models may simplify fault-tolerant protocols.
Quantum error correction protects fragile quantum information by encoding it into a larger quantum system. These extra degrees of freedom enable the detection and correction of errors, but also increase the operational complexity of the encoded logical qubit. Fault-tolerant circuits contain the spread of errors while operating the logical qubit, and are essential for realizing error suppression in practice. While fault-tolerant design works in principle, it has not previously been demonstrated in an error-corrected physical system with native noise characteristics. In this work, we experimentally demonstrate fault-tolerant preparation, measurement, rotation, and stabilizer measurement of a Bacon-Shor logical qubit using 13 trapped ion qubits. When we compare these fault-tolerant protocols to non-fault tolerant protocols, we see significant reductions in the error rates of the logical primitives in the presence of noise. The result of fault-tolerant design is an average state preparation and measurement error of 0.6% and a Clifford gate error of 0.3% after error correction. Additionally, we prepare magic states with fidelities exceeding the distillation threshold, demonstrating all of the key single-qubit ingredients required for universal fault-tolerant operation. These results demonstrate that fault-tolerant circuits enable highly accurate logical primitives in current quantum systems. With improved two-qubit gates and the use of intermediate measurements, a stabilized logical qubit can be achieved.
Abstract The accumulation of physical errors 1–3 prevents the execution of large-scale algorithms in current quantum computers. Quantum error correction 4 promises a solution by encoding k logical qubits onto a larger number n of physical qubits, such that the physical errors are suppressed enough to allow running a desired computation with tolerable fidelity. Quantum error correction becomes practically realizable once the physical error rate is below a threshold value that depends on the choice of quantum code, syndrome measurement circuit and decoding algorithm 5 . We present an end-to-end quantum error correction protocol that implements fault-tolerant memory on the basis of a family of low-density parity-check codes 6 . Our approach achieves an error threshold of 0.7% for the standard circuit-based noise model, on par with the surface code 7–10 that for 20 years was the leading code in terms of error threshold. The syndrome measurement cycle for a length- n code in our family requires n ancillary qubits and a depth-8 circuit with CNOT gates, qubit initializations and measurements. The required qubit connectivity is a degree-6 graph composed of two edge-disjoint planar subgraphs. In particular, we show that 12 logical qubits can be preserved for nearly 1 million syndrome cycles using 288 physical qubits in total, assuming the physical error rate of 0.1%, whereas the surface code would require nearly 3,000 physical qubits to achieve said performance. Our findings bring demonstrations of a low-overhead fault-tolerant quantum memory within the reach of near-term quantum processors.
We present a fault-tolerant [[8, 1, 3]] non-CSS quantum error correcting code and study its logical error rates. We modify Gottesman's encoding procedure for stabilizer codes to suit a class of non-CSS quantum codes. We adopt the bare ancilla method presented by Brown et al. to reorder the measurement sequence in the syndrome extraction step and upgrade it to obtain higher pseudo-thresholds and lower leading order terms of logical error rates under the standard depolarizing and anisotropic noise models.
Stabilizer quantum error correction (QEC) codes, in particular topological surface codes, are prime candidates to enable practical quantum computing. While it is widely believed that strictly fault-tolerant protocols can only be implemented using single- and two-qubit gates, several quantum computing platforms, including trapped ions, neutral atoms, and superconducting qubits, support native multi-qubit operations. In this Letter, we show that stabilizer measurement circuits for unrotated surface codes can be fault tolerant using single auxiliary qubits and three-qubit gates. These gates enable lower-depth circuits with fewer fault locations and potentially shorter QEC cycle times. We find that in an optimistic parameter regime where fidelities of three-qubit gates are the same as those of two-qubit gates, the logical error rate can be up to one order of magnitude lower and the threshold significantly higher, increasing from ≈0.63% to ≈0.83%. Our results, applicable to a wide range of platforms, motivate further investigation into multi-qubit gates for fault-tolerant QEC as they can offer substantial time and physical qubit resource advantages to reach a given target logical error rate.
Building fault-tolerant quantum computers with large numbers of logical qubits requires both scalable hardware architectures and error-correcting codes that make efficient use of physical qubits. Photonic interconnects address both of these challenges by allowing the physical qubits to be distributed across multiple processors while providing the non-local connectivity necessary to implement resource-efficient codes such as high-rate quantum low-density parity-check (qLDPC) codes. A key requirement for realising this architecture is the ability to perform stabiliser measurements between remote processors, which has not previously been demonstrated experimentally. Here we report the first experimental demonstration of distributed quantum error detection and correction. We generate entanglement between network qubits in two separate trapped-ion processors and use it to perform remote syndrome measurements on data qubits. We first realise a distributed [[2, 1, 1]] repetition code, detecting phase-flip errors on a logical qubit encoded across the two modules in real time and suppressing logical errors. We then combine these mid-circuit syndrome measurements with real-time feedforward to actively correct arbitrary single-qubit Pauli errors on a distributed Bell state. These results provide an experimental foundation for quantum error correction (QEC) across modular quantum architectures.
Qubits with strongly biased noise, in which phase-flip errors are orders of magnitude more frequent than bit-flips, arise both naturally, as in electron and nuclear spins, and by engineering, as in stabilized cat qubits. This noise structure holds the promise of reducing the daunting hardware overhead of fault-tolerant quantum computing, but exploiting it requires physical operations that do not convert frequent phase-flips into rare bit-flips. In this review, we analyze the most prominent fault-tolerant protocols for biased-noise qubits, organized according to the available set of such bias-preserving operations. When this set is restricted to the CZ gate together with preparation and measurement in the X basis, we show that the complexity of the required syndrome extraction gadgets essentially cancels the benefit of the noise bias: at experimentally relevant error rates, one may as well ignore the bias and rely on standard error correction designed for depolarizing noise. The situation changes drastically when a bias-preserving CX gate is available: the hierarchy of errors can then be reflected in the structure of the code, with frequent phase-flips corrected by a dedicated high-threshold code and rare bit-flips by concatenation with a high-rate code. The same hierarchy also enables hardware-efficient preparation of magic states. Finally, as a bias-preserving CX is forbidden in naturally biased platforms and challenging in engineered ones, we present a measurement-based architecture in which a high-fidelity quantum non-demolition readout of multi-qubit Pauli Z operators takes its place, extending these overhead reductions to a much broader range of physical platforms.