Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1701.02320

Ion-irradiated YBa$_2$Cu$_3$O$_7$ Josephson arrays

Aleksei Sharafiev, M. Malnou, C. Feuillet-Palma, C. Ulysse, Pascal Febvre, Jérôme Lesueur, N. Bergeal

Published Jan 9, 2017• 0 citations
arXivHTMLPDF

Abstract

We designed, fabricated and tested short one dimensional arrays of masked ion-irradiated YBa$_2$Cu$_3$O$_7$ Josephson junctions (JJ) embedded into log-periodic spiral antennas. Our arrays consist of 4 or 8 junctions separated either by 960~nm or 80~nm long areas of undamaged YBCO. Samples with distanced junctions and with closely spaced junctions showed qualitatively different behaviors. Well separated arrays demonstrated giant Shapiro steps in the hundreds-GHz band at 66K and were tested as Josephson mixers with improved impedance matching. All closely spaced arrays behaved as one junction with a lower superconducting transition temperature, hence forming a single weak link on distances up to 880~nm. Such design opens a new way to increase the I$_{c}$R$_{N}$ product of ion-irradiated junctions and we speculate that the phenomena and physics behind it might be similar to the so-called "giant" Josephson coupling observed in cuprates.

DOI
10.48550/arxiv.1701.02320

Related papers

HTS Josephson junctions arrays for high-frequency mixing

Aleksei Sharafiev, M. Malnou, C. Feuillet-Palma +6 more

Abstract We designed, fabricated and measured short one-dimensional arrays of masked ion-irradiated YBa 2 Cu 3 O 7 Josephson junctions embedded into log-periodic spiral antennas. They consist of four or eight junctions separated either by 960 nm or 80 nm long areas of pristine material. Large spacing arrays show ‘giant’ Shapiro steps in the hundreds-GHz band at 66 K and are tested as Josephson mixers with improved impedance matching. On the contrary, small spacing arrays behave as one junction with a lower superconducting transition temperature, hence forming a single weak link on distances up to 880 nm. Such design opens a new way to increase the I c R n product of the devices, and therefore the efficiency of Josephson mixers. Hints on the origin of the observed long range proximity effect are proposed.

Superconductor Science and Technology•Nov 27, 2017•18 citations

Tuning Y–Ba–Cu–O Focused Helium Ion Beam Josephson Junctions for Use as THz Mixers

Anthony Cortez, Ethan Y. Cho, Hao Li +3 more

We present Josephson junctions fabricated from high transition temperature superconductor YBa2Cu3O7coupled to spiral THz antennas. The fabrication process involves creating a Josephson junction at the center of a superconducting bridge embedded into a THz spiral antenna using irradiation from a focused helium ion beam. For low doses of helium irradiation, the junctions have metallic barriers and operate at temperatures as high as 67 K. For higher doses of irradiation, insulator barriers are created. These devices have higher resistance but require cooling to lower temperatures (~10 K) due to smaller critical currents. Through optimization of the dose and by trimming the width of the junctions, we have created high resistance devices to improve the impedance match to a spiral antenna. Under 90-GHz radiation, we observe up to 17 Shapiro steps in the I-V curve out to approximately 3 mV at a temperature of 10 K.

IEEE Transactions on Applied Superconductivity•Mar 18, 2019•12 citations

High-Frequency Properties of Y-Ba-Cu-O Josephson Junctions Fabricated with Helium Ion Beam Irradiation

Anthony Cortez, Ethan Y. Cho, Hao Li +3 more

We have fabricated spiral THz antennas containing embedded high TCYBa2Cu3O7 (YBCO) focused helium ion beam Josephson junctions (JJ) for characterization of their high frequency characteristics. The values of the resistance and critical current of the junctions are controlled through the irradiation dose and geometry of the junction. We observe several orders of Shapiro steps in the current voltage characteristics of the device when irradiated with 0.6 THz and a single step when irradiated at 2.52 THz.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2019•2 citations

YBa$_2$Cu$_3$O$_7$ nano-constriction Josephson junctions and SQUIDs fabricated by focused helium-ion-beam irradiation

Christoph Schmid, Christopher Buckreus, David Haas +9 more

By focused $30\,\mathrm{keV}$ He ion beam irradiation, epitaxially grown YBa$_2$Cu$_3$O$_7$ (YBCO) thin films can be driven from the superconducting to the insulating state with increasing irradiation dose. A properly chosen dose suppresses superconductivity down to $4\,\mathrm{K}$, while crystallinity is still preserved. With this approach we create areas of normal-conducting YBCO that can be used to define resistively shunted constriction-type Josephson junctions (cJJs) on the nanometer scale. We also demonstrate that the fabricated cJJs can be incorporated in direct current superconducting quantum interference devices and can be used as detector junctions in THz antennas.

cond-mat.supr-conCross-listedarXiv:2511.19197•Nov 25, 2025•0 citations

Josephson oscillation linewidth of ion-irradiated YBa 2 Cu 3 O 7 junctions

A Sharafiev, M. Malnou, C. Feuillet-Palma +4 more

Abstract We report on the noise properties of ion-irradiated YBa 2 Cu 3 O 7 Josephson junctions. This work aims at investigating the linewidth of the Josephson oscillation with a detector response experiment at ≃132 GHz. Experimental results are compared with a simple analytical model based on the Likharev–Semenov equation and the de Gennes dirty limit approximation. We show that the main source of low-frequency fluctuations in these junctions is the broadband Johnson noise and that the excess 1 f noise contribution does not prevail in the temperature range of interest, as reported in some other types of high- T c superconducting Josephson junctions. Finally, we discuss the interest of ion-irradiated junctions to implement frequency-tunable oscillators consisting of synchronized arrays of Josephson junctions.

arXiv:1603.08466•Superconductor Science and Technology•May 17, 2016•10 citations

The effects of annealing a 2-dimensional array of ion-irradiated Josephson junctions

Ethan Y. Cho, K Kouperine, Y Zhuo +2 more

Abstract We have fabricated the two-dimensional arrays of superconducting quantum interference devices (SQUIDs) using YBa 2 Cu 3 O 7- δ ion-irradiated Josephson junctions, and we have studied the effects of post-annealing the arrays at 100 ◦ C in oxygen. The maximum voltage modulation, V B , in a magnetic field for DC biased arrays at 50 K is initially 1.2 mV, but increases to 3 mV after annealing. Furthermore, the temperature where the largest V B occurs increases from 45 K to 48.5 K after annealing. We present and simulate a model where annealing causes diffusion and recombination of the low-energy oxygen defects that narrows the barrier, resulting in an increase in the Josephson binding energy. We show that this process stabilizes after 40 minutes of annealing and leads to a significant improvement in the properties of the array.

Superconductor Science and Technology•Jul 22, 2016•11 citations
Ion-irradiated YBa2_22​Cu3_33​O7_77​ Josephson arrays
We designed, fabricated and tested short one dimensional arrays of masked ion-irradiated YBa2_22​Cu3_33​O7_77​ Josephson junctions (JJ) embedded into log-periodic spiral antennas. Our arrays consist of 4 or 8 junctions separated either by 960nm or 80nm long areas of undamaged YBCO. Samples with distanced junctions and with closely spaced junctions showed qualitatively different behaviors. Well separated arrays demonstrated giant Shapiro steps in the hundreds-GHz band at 66K and were tested as Josephson mixers with improved impedance matching. All closely spaced arrays behaved as one junction with a lower superconducting transition temperature, hence forming a single weak link on distances up to 880~nm. Such design opens a new way to increase the Ic_{c}c​RN_{N}N​ product of ion-irradiated junctions and we speculate that the phenomena and physics behind it might be similar to the so-called "giant" Josephson coupling observed in cuprates.
Abstract We designed, fabricated and measured short one-dimensional arrays of masked ion-irradiated YBa 2 Cu 3 O 7 Josephson junctions embedded into log-periodic spiral antennas. They consist of four or eight junctions separated either by 960 nm or 80 nm long areas of pristine material. Large spacing arrays show ‘giant’ Shapiro steps in the hundreds-GHz band at 66 K and are tested as Josephson mixers with improved impedance matching. On the contrary, small spacing arrays behave as one junction with a lower superconducting transition temperature, hence forming a single weak link on distances up to 880 nm. Such design opens a new way to increase the I c R n product of the devices, and therefore the efficiency of Josephson mixers. Hints on the origin of the observed long range proximity effect are proposed.
We present Josephson junctions fabricated from high transition temperature superconductor YBa2Cu3O7coupled to spiral THz antennas. The fabrication process involves creating a Josephson junction at the center of a superconducting bridge embedded into a THz spiral antenna using irradiation from a focused helium ion beam. For low doses of helium irradiation, the junctions have metallic barriers and operate at temperatures as high as 67 K. For higher doses of irradiation, insulator barriers are created. These devices have higher resistance but require cooling to lower temperatures (~10 K) due to smaller critical currents. Through optimization of the dose and by trimming the width of the junctions, we have created high resistance devices to improve the impedance match to a spiral antenna. Under 90-GHz radiation, we observe up to 17 Shapiro steps in the I-V curve out to approximately 3 mV at a temperature of 10 K.
We have fabricated spiral THz antennas containing embedded high TCYBa2Cu3O7 (YBCO) focused helium ion beam Josephson junctions (JJ) for characterization of their high frequency characteristics. The values of the resistance and critical current of the junctions are controlled through the irradiation dose and geometry of the junction. We observe several orders of Shapiro steps in the current voltage characteristics of the device when irradiated with 0.6 THz and a single step when irradiated at 2.52 THz.
YBa2_22​Cu3_33​O7_77​ nano-constriction Josephson junctions and SQUIDs fabricated by focused helium-ion-beam irradiation
By focused 30 keV30\,\mathrm{keV}30keV He ion beam irradiation, epitaxially grown YBa2_22​Cu3_33​O7_77​ (YBCO) thin films can be driven from the superconducting to the insulating state with increasing irradiation dose. A properly chosen dose suppresses superconductivity down to 4 K4\,\mathrm{K}4K, while crystallinity is still preserved. With this approach we create areas of normal-conducting YBCO that can be used to define resistively shunted constriction-type Josephson junctions (cJJs) on the nanometer scale. We also demonstrate that the fabricated cJJs can be incorporated in direct current superconducting quantum interference devices and can be used as detector junctions in THz antennas.
Abstract We report on the noise properties of ion-irradiated YBa 2 Cu 3 O 7 Josephson junctions. This work aims at investigating the linewidth of the Josephson oscillation with a detector response experiment at ≃132 GHz. Experimental results are compared with a simple analytical model based on the Likharev–Semenov equation and the de Gennes dirty limit approximation. We show that the main source of low-frequency fluctuations in these junctions is the broadband Johnson noise and that the excess 1 f noise contribution does not prevail in the temperature range of interest, as reported in some other types of high- T c superconducting Josephson junctions. Finally, we discuss the interest of ion-irradiated junctions to implement frequency-tunable oscillators consisting of synchronized arrays of Josephson junctions.
Abstract We have fabricated the two-dimensional arrays of superconducting quantum interference devices (SQUIDs) using YBa 2 Cu 3 O 7- δ ion-irradiated Josephson junctions, and we have studied the effects of post-annealing the arrays at 100 ◦ C in oxygen. The maximum voltage modulation, V B , in a magnetic field for DC biased arrays at 50 K is initially 1.2 mV, but increases to 3 mV after annealing. Furthermore, the temperature where the largest V B occurs increases from 45 K to 48.5 K after annealing. We present and simulate a model where annealing causes diffusion and recombination of the low-energy oxygen defects that narrows the barrier, resulting in an increase in the Josephson binding energy. We show that this process stabilizes after 40 minutes of annealing and leads to a significant improvement in the properties of the array.