Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1612.05796 · Physical Review A

Reexamination of continuous fuzzy measurement on two-level systems

D. Sokolovski, Simone Rusconi, S. Brouard, Elena V. Akhmatskaya

Published Apr 10, 2017• 1 citation
arXivHTMLPDF

Abstract

Imposing restrictions on the Feynman paths of the monitored system has in the past been proposed as a universal model-free approach to continuous quantum measurements. Here we revisit this proposition and demonstrate that a Gaussian restriction, resulting in a sequence of many highly inaccurate (weak) von Neumann measurements, is not sufficiently strong to ensure proximity between a readout and the Feynman paths along which the monitored system evolves. Rather, in the continuous limit, the variations of a typical readout become much larger than the separation between the eigenvalues of the measured quantity. Thus, a typical readout is not represented by a nearly constant curve, correlating with one of the eigenvalues of the measured quantity $\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{A}$, even when decoherence or Zeno effect is achieved for the observed two-level system, and does not point directly to the system's final state. We show that the decoherence in a ``free'' system can be seen as induced by a Gaussian random walk with a drift, eventually directing the system towards one of the eigenstates of $\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{A}$. A similar mechanism appears to be responsible for the Zeno effect in a driven system, when its Rabi oscillations are quenched by monitoring. Alongside the Gaussian case, which can only be studied numerically, we also consider a fully tractable model with a ``hard wall'' restriction and show the results to be similar.

DOI
10.1103/physreva.95.042111

Related papers

Continuous fuzzy measurement of energy for a two-level system

Jürgen Audretsch, Michael B. Mensky

A continuous measurement of energy that is sharp (perfect) leads to the quantum Zeno effect (freezing of the state). Only if the quantum measurement is fuzzy (unsharp), continuous monitoring gives a readout $E(t)$ from which information about the dynamical development of the state vector of the system may be obtained in certain cases. This is studied in detail. Fuzziness is thereby introduced with the help of restricted path integrals equivalent to non-Hermitian Hamiltonians. For an otherwise undisturbed multilevel system it is shown that this measurement represents a model of decoherence. If it lasts long enough, the measurement readout discriminates between the energy levels and the von Neumann state reduction is obtained. For a two-level system under resonance influence (which undergoes, in the absence of measurement, Rabi oscillations between the levels) different regimes of measurement are specified depending on its duration and fuzziness: (i) the Zeno regime, where the measurement results in a freezing of the transitions between the levels, and (ii) the Rabi regime, where the transitions are maintained. It is shown that in the Rabi regime at the border to the Zeno regime a correlation exists between the time-dependent measurement readout and the modified Rabi oscillations of the state of the measured system. Possible realizations of continuous fuzzy measurements of energy are sketched.

arXiv:quant-ph/9703049•Physical Review A•Jul 1, 1997•26 citations

Realization scheme for continuous fuzzy measurement of energy and the monitoring of a quantum transition

Audretsch, J., Mensky, M. B.

The continuous fuzzy measurement of energy of a single two-level system driven by a resonant external field is studied. An analysis is given in the framework of the phenomenological restricted path integral approach (RPI) (which reduces effectively to a Schrodinger equation with a complex Hamiltonian) as well as with reference to the microphysical details of a class of concrete physical realizations. Within the RPI approach it is demonstrated that for appropriately adjusted fuzziness, information about the evolution of the state of the system can be read off from the measurement readout E(t). It is shown furthermore how a measurement of this type may be realized by a series of weak and short interactions of the two-level system with a quantum mechanical meter system. After each interaction a macroscopic measuring apparatus causes the meter to transit into one of two states. The result is used to generate the energy readout E(t). In this way a complete agreement with the RPI approach is demonstrated which thus obtains an operational interpretation.

arXiv:quant-ph/9808062•Aug 28, 1998•7 citations

Zeno effect and ergodicity in finite-time quantum measurements

D. Sokolovski

We demonstrate that an attempt to measure a nonlocal in time quantity, such as the time average $\ensuremath{\langle}A{\ensuremath{\rangle}}_{T}$ of a dynamical variable $A$, by separating Feynman paths into ever narrower exclusive classes traps the system in eigensubspaces of the corresponding operator $\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{A}$. Conversely, in a long measurement of $\ensuremath{\langle}A{\ensuremath{\rangle}}_{T}$ to a finite accuracy, the system explores its Hilbert space and is driven to a universal steady state in which the von Neumann ensemble average of $\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{A}$ coincides with $\ensuremath{\langle}A{\ensuremath{\rangle}}_{T}$. Both effects are conveniently analyzed in terms of singularities and critical points of the corresponding amplitude distribution and the Zeno-like behavior is shown to be a consequence of the conservation of probability.

arXiv:1011.4773•Physical Review A•Dec 21, 2011•10 citations

Quantum measurement theory and the quantum Zeno effect

M. J. Gagen

This is a theoretical thesis in the area of quantum measurement theory. Due to the extensive breadth of this field we choose to narrow our focus to examine a particular problem - the quantum Zeno effect (defined below). Quantum measurement theory is introduced in Chap. 1, using the terminology of effects and operations. This approach allows an operational definition of such terms as a state vector, an ensemble, and a measurement device (for instance), and a consideration of interactions between quantum systems and inaccurate measurement devices. We further introduce the quantum trajectories approach to consider the evolution of an individual quantum system subject to measurement. The quantum Zeno effect is introduced in Chap. 2. Any quantum treatment of a measurement interaction must consider the measurement backaction onto the measured system and this backaction will disrupt the free evolution of the system. The quantum Zeno effect occurs in the strong measurement limit where the measurement backaction totally freezes the evolution of the system, thus rendering the measurement useless. The effect is introduced via projective measurements of two level systems subject to measurement of level populations. At this stage we are able to discuss the main questions addressed by this thesis, and present its structure in Chap. 2. We then develop a new measurement model for the interaction between a system and a measurement device in Chap. 3. Our motivation in doing this is to better model the usual laboratory meter, and in our approach the meter dynamics are such that it relaxes towards an appropriate readout of the system parameter of interest. The irreducible quantum noise of the meter introduces fluctuations that drive the stochastic dynamical collapse of the system wavefunction. In our model, the measured system dynamics (if treated selectively) are described by a stochastic, nonlinear Schroedinger equation. A double well system subject to position measurement provides a natural first application for this model. This is done in Chap. 4 where we monitor the coherent tunnelling of a particle from one well to the other. The advantage afforded by considering this system is that it displays differing regimes where the measurement observable (position) is approximated as possessing either, respectively, a continuous or a discrete eigenvalue structure. Thus, we use this one model to explore the quantum Zeno effect in both measurement regimes. The above treatment is of a theoretical measurement model. In Chap. 5 we turn to consider a recent experimental test of the quantum Zeno effect which examined the dynamics of a two level atom subject to pulsed measurements of atomic level populations. We treat a slightly modified experiment in a fully continuous measurement regime. By first unravelling the optical Bloch equations, and second, using the quantum trajectories approach we demonstrate the existence of certain measurement regimes where there is a quantum Zeno effect, and other regimes where no measurement of the atomic populations is being effected at all. Through these results we demonstrate the importance of making a full analysis of the system-detector interaction before any conclusions can be made. In the remainder of the thesis we propose further possible tests of the quantum Zeno effect. In Chap. 6 the evolution of a Rydberg atom exchanging one photon with a single cavity mode subject to measurement is examined. The measurement is made by monitoring the photon number occupancy of the cavity mode using a beam of Rydberg atoms configured so as to perform phase sensitive detection. In the limit of frequent monitoring we show that the free oscillation of the atomic inversion is disrupted, and the atom is trapped close to its initial state. This is the quantum Zeno effect. In Chap. 7 we realize the Zeno effect on two possible systems. We consider first, a two level Jaynes-Cumming atom interacting with a cavity mode, and second, two electromagnetic modes configured as a multi-level parametric frequency converter. These systems interact with another cavity mode via a quadratic coupling system based on four wave mixing, and constructed to be a quantum nondemolition measurement of the photon number. This mode is damped to the environment thus effecting a measurement of the system populations. Again we show that this interaction, can manifest the quantum Zeno effect. Our explicit modelling of the system-detector interaction enables us to show how the effect depends on the resolution time of the detector. Finally, we consider a proposed measurement of the square of the quadrature phase of an electromagnetic mode in Chap. 8. Here, a three mode interaction mediated by a second order nonlinear susceptibility is considered. One mode, the pump, is prepared in a feedback generated photon number state to give insight into the role of pump noise. The other two modes are treated as an angular momentum system, and we show that photon counting on the two mode rotation system effects the above mentioned measurement. In addition, this measurement provides a direct measure of the second order squeezing of the signal. With that we finish our investigation of the quantum Zeno effect using the techniques of quantum measurement theory. However, in the epilogue [Chap. 9] we note that no thesis in quantum measurement theory would be complete without some consideration of the ``meaning attributed to the theory. In the epilogue we take a novel historical approach and examine the method by which metaphysical theories are formed to draw conclusions regarding quantum metaphysics.

•Jun 25, 1993•3 citations

Quantum Zeno effect appears in stages

Kyrylo Snizhko, Parveen Kumar, Alessandro Romito

In the quantum Zeno effect, quantum measurements can block the coherent oscillation of a two level system by freezing its state to one of the measurement eigenstates. The effect is conventionally controlled by the measurement frequency. Here we study the development of the Zeno regime as a function of the measurement strength for a continuous partial measurement. We show that the onset of the Zeno regime is marked by a cascade of transitions in the system dynamics as the measurement strength is increased. Some of these transitions are only apparent in the collective behavior of individual quantum trajectories and are invisible to the average dynamics. They include the appearance of a region of dynamically inaccessible states and of singularities in the steady-state probability distribution of states. These predicted dynamical features, which can be readily observed in current experiments, show the coexistence of fundamentally unpredictable quantum jumps with those continuously monitored and reverted in recent experiments.

•Sep 29, 2020•62 citations

Stochastic quantum trajectories demonstrate the quantum Zeno effect in open spin 1/2, spin 1 and spin 3/2 systems

Sophia M. Walls, Julien M Schachter, Haocheng Qian +1 more

Abstract We investigate the quantum Zeno effect (QZE) in spin 1/2, spin 1 and spin 3/2 open quantum systems undergoing Rabi oscillations, revealing unexplored features for the spin 1 and spin 3/2 systems. The systems interact with an environment designed to perform continuous measurements of an observable, driving the systems stochastically towards one of the eigenstates of the corresponding operator. The system-environment coupling constant represents the strength of the measurement. Stochastic quantum trajectories are generated by unravelling a Markovian Lindblad master equation using the quantum state diffusion formalism. These are regarded as a more appropriate representation of system behaviour than consideration of the averaged evolution since the latter can mask the effect of measurement. Complete positivity is maintained and thus the trajectories can be considered as physically meaningful. The QZE is investigated over a range of measurement strengths. Increasing the strength leads to greater system dwell in the vicinity of the eigenstates of the measured observable and lengthens the time taken by the system to return to that eigenstate, thus the QZE emerges. For very strong measurement, the Rabi oscillations resemble randomly occurring near-instantaneous jumps between eigenstates. The trajectories followed by the quantum system are heavily dependent on the measurement strength which other than slowing down and adding noise to the Rabi oscillations, changes the paths taken in spin phase space from a circular precession into elaborate figures-of-eight. For spin 1 and spin 3/2 systems, the measurement strength determines which eigenstates are explored and the QZE is stronger when the system dwells in the vicinity of certain eigenstates compared to others.

arXiv:2209.10626•Journal of Physics A Mathematical and Theoretical•Apr 4, 2024•7 citations
Imposing restrictions on the Feynman paths of the monitored system has in the past been proposed as a universal model-free approach to continuous quantum measurements. Here we revisit this proposition and demonstrate that a Gaussian restriction, resulting in a sequence of many highly inaccurate (weak) von Neumann measurements, is not sufficiently strong to ensure proximity between a readout and the Feynman paths along which the monitored system evolves. Rather, in the continuous limit, the variations of a typical readout become much larger than the separation between the eigenvalues of the measured quantity. Thus, a typical readout is not represented by a nearly constant curve, correlating with one of the eigenvalues of the measured quantity A\ifmmode^\elseˆ\fi\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{A}A\ifmmode^\elseˆ\fi​, even when decoherence or Zeno effect is achieved for the observed two-level system, and does not point directly to the system's final state. We show that the decoherence in a free'' system can be seen as induced by a Gaussian random walk with a drift, eventually directing the system towards one of the eigenstates of $\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{A}$. A similar mechanism appears to be responsible for the Zeno effect in a driven system, when its Rabi oscillations are quenched by monitoring. Alongside the Gaussian case, which can only be studied numerically, we also consider a fully tractable model with a hard wall'' restriction and show the results to be similar.
A continuous measurement of energy that is sharp (perfect) leads to the quantum Zeno effect (freezing of the state). Only if the quantum measurement is fuzzy (unsharp), continuous monitoring gives a readout E(t)E(t)E(t) from which information about the dynamical development of the state vector of the system may be obtained in certain cases. This is studied in detail. Fuzziness is thereby introduced with the help of restricted path integrals equivalent to non-Hermitian Hamiltonians. For an otherwise undisturbed multilevel system it is shown that this measurement represents a model of decoherence. If it lasts long enough, the measurement readout discriminates between the energy levels and the von Neumann state reduction is obtained. For a two-level system under resonance influence (which undergoes, in the absence of measurement, Rabi oscillations between the levels) different regimes of measurement are specified depending on its duration and fuzziness: (i) the Zeno regime, where the measurement results in a freezing of the transitions between the levels, and (ii) the Rabi regime, where the transitions are maintained. It is shown that in the Rabi regime at the border to the Zeno regime a correlation exists between the time-dependent measurement readout and the modified Rabi oscillations of the state of the measured system. Possible realizations of continuous fuzzy measurements of energy are sketched.
The continuous fuzzy measurement of energy of a single two-level system driven by a resonant external field is studied. An analysis is given in the framework of the phenomenological restricted path integral approach (RPI) (which reduces effectively to a Schrodinger equation with a complex Hamiltonian) as well as with reference to the microphysical details of a class of concrete physical realizations. Within the RPI approach it is demonstrated that for appropriately adjusted fuzziness, information about the evolution of the state of the system can be read off from the measurement readout E(t). It is shown furthermore how a measurement of this type may be realized by a series of weak and short interactions of the two-level system with a quantum mechanical meter system. After each interaction a macroscopic measuring apparatus causes the meter to transit into one of two states. The result is used to generate the energy readout E(t). In this way a complete agreement with the RPI approach is demonstrated which thus obtains an operational interpretation.
We demonstrate that an attempt to measure a nonlocal in time quantity, such as the time average $\ensuremath{\langle}A{\ensuremath{\rangle}}_{T}$ of a dynamical variable AAA, by separating Feynman paths into ever narrower exclusive classes traps the system in eigensubspaces of the corresponding operator $\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{A}$. Conversely, in a long measurement of $\ensuremath{\langle}A{\ensuremath{\rangle}}_{T}$ to a finite accuracy, the system explores its Hilbert space and is driven to a universal steady state in which the von Neumann ensemble average of $\stackrel{\ifmmode \hat{}\else \^{}\fi{}}{A}$ coincides with $\ensuremath{\langle}A{\ensuremath{\rangle}}_{T}$. Both effects are conveniently analyzed in terms of singularities and critical points of the corresponding amplitude distribution and the Zeno-like behavior is shown to be a consequence of the conservation of probability.
This is a theoretical thesis in the area of quantum measurement theory. Due to the extensive breadth of this field we choose to narrow our focus to examine a particular problem - the quantum Zeno effect (defined below). Quantum measurement theory is introduced in Chap. 1, using the terminology of effects and operations. This approach allows an operational definition of such terms as a state vector, an ensemble, and a measurement device (for instance), and a consideration of interactions between quantum systems and inaccurate measurement devices. We further introduce the quantum trajectories approach to consider the evolution of an individual quantum system subject to measurement. The quantum Zeno effect is introduced in Chap. 2. Any quantum treatment of a measurement interaction must consider the measurement backaction onto the measured system and this backaction will disrupt the free evolution of the system. The quantum Zeno effect occurs in the strong measurement limit where the measurement backaction totally freezes the evolution of the system, thus rendering the measurement useless. The effect is introduced via projective measurements of two level systems subject to measurement of level populations. At this stage we are able to discuss the main questions addressed by this thesis, and present its structure in Chap. 2. We then develop a new measurement model for the interaction between a system and a measurement device in Chap. 3. Our motivation in doing this is to better model the usual laboratory meter, and in our approach the meter dynamics are such that it relaxes towards an appropriate readout of the system parameter of interest. The irreducible quantum noise of the meter introduces fluctuations that drive the stochastic dynamical collapse of the system wavefunction. In our model, the measured system dynamics (if treated selectively) are described by a stochastic, nonlinear Schroedinger equation. A double well system subject to position measurement provides a natural first application for this model. This is done in Chap. 4 where we monitor the coherent tunnelling of a particle from one well to the other. The advantage afforded by considering this system is that it displays differing regimes where the measurement observable (position) is approximated as possessing either, respectively, a continuous or a discrete eigenvalue structure. Thus, we use this one model to explore the quantum Zeno effect in both measurement regimes. The above treatment is of a theoretical measurement model. In Chap. 5 we turn to consider a recent experimental test of the quantum Zeno effect which examined the dynamics of a two level atom subject to pulsed measurements of atomic level populations. We treat a slightly modified experiment in a fully continuous measurement regime. By first unravelling the optical Bloch equations, and second, using the quantum trajectories approach we demonstrate the existence of certain measurement regimes where there is a quantum Zeno effect, and other regimes where no measurement of the atomic populations is being effected at all. Through these results we demonstrate the importance of making a full analysis of the system-detector interaction before any conclusions can be made. In the remainder of the thesis we propose further possible tests of the quantum Zeno effect. In Chap. 6 the evolution of a Rydberg atom exchanging one photon with a single cavity mode subject to measurement is examined. The measurement is made by monitoring the photon number occupancy of the cavity mode using a beam of Rydberg atoms configured so as to perform phase sensitive detection. In the limit of frequent monitoring we show that the free oscillation of the atomic inversion is disrupted, and the atom is trapped close to its initial state. This is the quantum Zeno effect. In Chap. 7 we realize the Zeno effect on two possible systems. We consider first, a two level Jaynes-Cumming atom interacting with a cavity mode, and second, two electromagnetic modes configured as a multi-level parametric frequency converter. These systems interact with another cavity mode via a quadratic coupling system based on four wave mixing, and constructed to be a quantum nondemolition measurement of the photon number. This mode is damped to the environment thus effecting a measurement of the system populations. Again we show that this interaction, can manifest the quantum Zeno effect. Our explicit modelling of the system-detector interaction enables us to show how the effect depends on the resolution time of the detector. Finally, we consider a proposed measurement of the square of the quadrature phase of an electromagnetic mode in Chap. 8. Here, a three mode interaction mediated by a second order nonlinear susceptibility is considered. One mode, the pump, is prepared in a feedback generated photon number state to give insight into the role of pump noise. The other two modes are treated as an angular momentum system, and we show that photon counting on the two mode rotation system effects the above mentioned measurement. In addition, this measurement provides a direct measure of the second order squeezing of the signal. With that we finish our investigation of the quantum Zeno effect using the techniques of quantum measurement theory. However, in the epilogue [Chap. 9] we note that no thesis in quantum measurement theory would be complete without some consideration of the ``meaning attributed to the theory. In the epilogue we take a novel historical approach and examine the method by which metaphysical theories are formed to draw conclusions regarding quantum metaphysics.
In the quantum Zeno effect, quantum measurements can block the coherent oscillation of a two level system by freezing its state to one of the measurement eigenstates. The effect is conventionally controlled by the measurement frequency. Here we study the development of the Zeno regime as a function of the measurement strength for a continuous partial measurement. We show that the onset of the Zeno regime is marked by a cascade of transitions in the system dynamics as the measurement strength is increased. Some of these transitions are only apparent in the collective behavior of individual quantum trajectories and are invisible to the average dynamics. They include the appearance of a region of dynamically inaccessible states and of singularities in the steady-state probability distribution of states. These predicted dynamical features, which can be readily observed in current experiments, show the coexistence of fundamentally unpredictable quantum jumps with those continuously monitored and reverted in recent experiments.
Abstract We investigate the quantum Zeno effect (QZE) in spin 1/2, spin 1 and spin 3/2 open quantum systems undergoing Rabi oscillations, revealing unexplored features for the spin 1 and spin 3/2 systems. The systems interact with an environment designed to perform continuous measurements of an observable, driving the systems stochastically towards one of the eigenstates of the corresponding operator. The system-environment coupling constant represents the strength of the measurement. Stochastic quantum trajectories are generated by unravelling a Markovian Lindblad master equation using the quantum state diffusion formalism. These are regarded as a more appropriate representation of system behaviour than consideration of the averaged evolution since the latter can mask the effect of measurement. Complete positivity is maintained and thus the trajectories can be considered as physically meaningful. The QZE is investigated over a range of measurement strengths. Increasing the strength leads to greater system dwell in the vicinity of the eigenstates of the measured observable and lengthens the time taken by the system to return to that eigenstate, thus the QZE emerges. For very strong measurement, the Rabi oscillations resemble randomly occurring near-instantaneous jumps between eigenstates. The trajectories followed by the quantum system are heavily dependent on the measurement strength which other than slowing down and adding noise to the Rabi oscillations, changes the paths taken in spin phase space from a circular precession into elaborate figures-of-eight. For spin 1 and spin 3/2 systems, the measurement strength determines which eigenstates are explored and the QZE is stronger when the system dwells in the vicinity of certain eigenstates compared to others.