We propose an efficient qubit initialization protocol based on a dissipative environment that can be dynamically adjusted. Here the qubit is coupled to a thermal bath through a tunable harmonic oscillator. On-demand initialization is achieved by sweeping the oscillator rapidly into resonance with the qubit. This resonant coupling with the engineered environment induces fast relaxation to the ground state of the system, and a consecutive rapid sweep back to off resonance guarantees weak excess dissipation during quantum computations. We solve the corresponding quantum dynamics using a Markovian master equation for the reduced density operator of the qubit-bath system. This allows us to optimize the parameters and the initialization protocol for the qubit. Our analytical calculations show that the ground-state occupation of our system is well protected during the fast sweeps of the environmental coupling and, consequently, we obtain an estimate for the duration of our protocol by solving the transition rates between the low-energy eigenstates with the Jacobian diagonalization method. Our results suggest that the current experimental state of the art for the initialization speed of superconducting qubits at a given fidelity can be considerably improved.
We propose an efficient qubit initialization protocol based on a dissipative environment that can be dynamically adjusted. Here the qubit is coupled to a thermal bath through a tunable harmonic oscillator. On-demand initialization is achieved by sweeping the oscillator rapidly into resonance with the qubit. This resonant coupling with the engineered environment induces fast relaxation to the ground state of the system, and a consecutive rapid sweep back to off resonance guarantees weak excess dissipation during quantum computations. We solve the corresponding quantum dynamics using a Markovian master equation for the reduced density operator of the qubit-bath system. This allows us to optimize the parameters and the initialization protocol for the qubit. Our analytical calculations show that the ground-state occupation of our system is well protected during the fast sweeps of the environmental coupling and, consequently, we obtain an estimate for the duration of our protocol by solving the transition rates between the low-energy eigenstates with the Jacobian diagonalization method. Our results suggest that the current experimental state of the art for the initialization speed of superconducting qubits at a given fidelity can be considerably improved.
Abstract We propose an efficient qubit initialization protocol based on a dissipative environment that can be dynamically adjusted. Here, the qubit is coupled to a thermal bath through a tunable harmonic oscillator. On-demand initialization is achieved by sweeping the oscillator rapidly into resonance with the qubit. This resonant coupling with the engineered environment induces fast relaxation to the ground state of the system, and a consecutive rapid sweep back to off resonance guarantees weak excess dissipation during quantum computations. We solve the corresponding quantum dynamics using a Markovian master equation for the reduced density operator of the qubit-bath system. This allows us to optimize the parameters and the initialization protocol for the qubit. Our analytical calculations show that the ground-state occupation of our system is well protected during the fast sweeps of the environmental coupling and, consequently, we obtain an estimate for the duration of our protocol by solving the transition rates between the low-energy eigenstates with the Jacobian diagonalization method. Our results suggest that the current experimental state of the art for the initialization speed of superconducting qubits at a given fidelity can be considerably improved.
The ability to fast reset a qubit state is crucial for quantum information processing. However, to actively reset a qubit requires engineering a pathway to interact with a dissipative bath, which often comes at the cost of reduced qubit protection from the environment. Here, we present a multipurpose architecture that enables fast reset and protection of superconducting qubits during control and readout. In our design, two on-chip diplexers are connected by two transmission lines. The high-pass branch provides a flat passband for convenient allocation of readout resonators above the qubit frequencies, which is preferred for reducing measurement-induced state transitions. In the low-pass branch, we leverage a standing-wave mode below the maximum qubit frequency for a rapid reset. The qubits are located in the common stopband to inhibit dissipation during coherent operations. We demonstrate resetting a transmon qubit from its first excited state to the ground state in 100 ns, achieving a residual population of 2.7%. The reset time may be further shortened to 27 ns by exploiting the coherent population inversion effect. We further extend the technique to resetting the qubit from its second excited state. Our approach promises scalable implementation of fast reset and qubit protection during control and readout, adding to the toolbox of dissipation engineering.
Abstract We determine how to optimally reset a superconducting qubit which interacts with a thermal environment in such a way that the coupling strength is tunable. Describing the system in terms of a time-local master equation with time-dependent decay rates and using quantum optimal control theory, we identify temporal shapes of tunable level splittings which maximize the efficiency of the reset protocol in terms of duration and error. Time-dependent level splittings imply a modification of the system-environment coupling, varying the decay rates as well as the Lindblad operators. Our approach thus demonstrates efficient reservoir engineering employing quantum optimal control. We find the optimized reset strategy to consist in maximizing the decay rate from one state and driving non-adiabatic population transfer into this strongly decaying state.
Engineered dissipation provides a powerful route to controlling and stabilizing quantum states in open systems. Superconducting circuits are particularly suited to this approach due to their tunable coupling to dissipative environments. Here we realize programmable local reservoirs for superconducting qubits through parametrically driven coupling to readout resonators, creating energy-selective incoherent pump and loss. Using coupled superconducting qubits, we autonomously stabilize entangled single-excitation states with fidelity up to 90.8%. We probe the stabilization dynamics under varying initial conditions and bath parameters, and implement robust classical shadow estimation for accurate and scalable state characterization. Finally, we numerically study a configuration where the engineered pump and loss share a common dissipative mode, leading to reservoir-mediated interference and classically correlated steady states. Our results demonstrate a scalable and hardware-efficient framework for dissipative preparation and control of correlated many-body states in superconducting circuits.
Fast qubit reset is essential for qubit reuse in the noisy intermediate-scale quantum computing era, yet it conflicts with the weak decoherence required for high-fidelity computation. We solve the time-optimal reset problem for a frequency-tunable qubit coupled to a structural environment under realistic spectral and control constraints. The optimal strategy consists of a switch--restore--switch sequence, where the qubit is moved from a low-decoherence computational configuration to a high-decoherence restoring configuration and then returned for reuse. For superconducting qubits in four representative environments, this strategy reduces the reset time from typically $\gtrsim\SI{100}{\nano\second}$ to $\SI{20}{\nano\second}$, about 40% of a typical two-qubit gate time, while achieving a reset precision of 10−5. Our results identify environmental spectral structure as a practical resource for rapid, high-fidelity qubit reset and provide a design principle for qubit reuse on qubit-limited processors.
We analyze the dynamics of a qubit-resonator system coupled with a thermal bath and external electromagnetic fields. Using the evolution equations for the set of Heisenberg operators that describe the whole system, we derive an expression for the resonator field, that includes the resonator-drive, the resonator-bath, and resonator-qubit interactions. The renormalization of the resonator frequency, caused by the qubit-resonator interaction, is accounted for. Using the solutions for the resonator field, we derive the equation that describes the qubit dynamics. The dependence of the qubit evolution during the measurement time on the fidelity of a single-shot measurement is studied. The relation between the fidelity and measurement time is shown explicitly. We proposed a novel adiabatic method for the phase qubit measurement. The method utilizes a low-frequency, quasi-classical resonator inductively coupled to the qubit. The resonator modulates the qubit energy, and the back reaction of the qubit causes a shift in the phase of the resonator. The resonator phase shift can be used to determine the qubit state. We have simulated this measurement taking into the account the energy levels outside the phase qubit manifold. We have shown that, for qubit frequencies in the range of 8-12GHZ, a resonator frequency of 500 MHz and a measurement time of 100 ns, the phase difference between the two qubit states is greater than 0.2 rad. This phase difference exceeds the measurement uncertainty, and can be detected using a classical phase-meter. A fidelity of 0.9999 can be achieved for a relaxation time of 0.5 ms. We also model and simulate a microstrip-SQUID amplifier of frequency about 500 MHz, which could be used to amplify the resonator oscillations in the phase qubit adiabatic measurement. The voltage gain and the amplifier noise temperature are calculated. We simulate the preparation of a generalized Bell state and compute the relaxation times required for achieving high fidelities. We consider two capacitively coupled phase qubits similar to that used in the experimental work of R. Bialczak et al. (Nature Physics, 6, 409, 2010). The Bell state was created using a NOT gate and a universal entangling gate. We solved the equation of motion for the density matrix with the Bloch relaxation times, T{sub 1} and T{sub 2}. For every qubit we took into consideration all the states in the shallow well including the states outside the qubit manifold. Also we took into consideration unwanted interaction between the qubits during the application of the NOT gate. The NOT gate was implemented using a Gaussian pulse assuming the frequency difference between the two qubits is 200 MHz. An entangling gate was implemented reducing this frequency difference to zero. We have found the optimal parameters for the Gaussian pulse and the optimal duration for the entangling gate. We have shown that the maximum fidelity of 0.99 can be achieved for the minimum relaxation time, T{sub 1} = 1.2 {micro}s, if T{sub 2} = 2T{sub 1}. By slightly increasing the required value of T{sub 1}, one can sharply reduce the required value for T{sub 2}.