Quantum spectral analysis: bandwidth at time (a lecture)

Florian Kaiser, Djeylan Aktas, Bruno Fedrici +3 more

We demonstrate an experimental method for measuring energy-time entanglement over almost 80 nm spectral bandwidth in a single shot with a quantum bit error rate below 0.5%. Our scheme is extremely cost-effective and efficient in terms of resources as it employs only one source of entangled photons and one fixed unbalanced interferometer per phase-coded analysis basis. We show that the maximum analysis spectral bandwidth is obtained when the analysis interferometers are properly unbalanced, a strategy which can be straightforwardly applied to most of today's experiments based on energy-time and time-bin entanglement. Our scheme has therefore a great potential for boosting bit rates and reducing the resource overhead of future entanglement-based quantum key distribution systems.

Mario Mastriani

Valter Moretti

Vincent Crozatier, V. Lavielle, Fabien Bretenaker +2 more

We demonstrate implementation of the chirp transform algorithm with photon echoes in an Er/sup 3+/:YSO crystal at 1536 nm for application to spectral analysis of RF signals. The principle and features of the technique are presented using a simple picture in the time-frequency plane. Experimental results with low-bandwidth RF signals demonstrate 40-kHz spectral resolution and a time-bandwidth product of 500. Extension to broad-band RF signals is discussed.

Friso Schlottau, Max Colice, Kelvin H. Wagner +1 more

We present experimental results for what is to our knowledge the first spectral-hole-burning based rf spectrum analyzer to cover 10 GHz of rf analysis bandwidth. The rf signal of interest is modulated onto an optical carrier, and the resultant optical sidebands are burned into the inhomogeneously broadened absorption band of a Tm3+:YAG crystal. At the same time a second, frequency-swept laser reads out the absorption profile, which is a double-sideband replica of the rf spectrum, and thus the rf spectrum can be deduced after spectral calibration of the nonlinear readout chirp. This initial demonstration shows spectral analysis covering 10 GHz of bandwidth with >5500 spectral channels and provides 43 dB of dynamic range.

David B. Pearson