Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1611.00917 · Physical Review A

Quantum nondemolition measurement of optical field fluctuations by optomechanical interaction

A. Pontin, M. Bonaldi, A. Borrielli, L. Marconi, Francesco Marino, G. Pandraud, Giovanni Andrea Prodi, Pasqualina Maria Sarro, Enrico Serra, Francesco Marin

Published Mar 16, 2018• 19 citations
arXivHTMLPDF

Abstract

According to quantum mechanics, if we keep observing a continuous variable we generally disturb its evolution. For a class of observables, however, it is possible to implement a so-called quantum nondemolition measurement: by confining the perturbation to the conjugate variable, the observable is estimated with arbitrary accuracy, or prepared in a well-known state. For instance, when the light bounces on a movable mirror, its intensity is not perturbed (the effect is just seen on the phase of the radiation), but the radiation pressure allows one to trace back its fluctuations by observing the mirror motion. In this work, we implement a cavity optomechanical experiment based on an oscillating micromirror, and we measure correlations between the output light intensity fluctuations and the mirror motion. We demonstrate that the uncertainty of the former is reduced below the shot-noise level determined by the corpuscular nature of light.

DOI
10.1103/physreva.97.033833

Related papers

Quantum nondemolition measurement of light intensity fluctuations in an optomechanical experiment

A. Pontin, M. Bonaldi, A. Borrielli +7 more

According to quantum mechanics, there exists a class of observables for which is possible to confine the perturbation produced by a continuous measurement to the conjugate variable. Therefore, it is possible to devise experimental schemes that allow estimating the observed variable with arbitrary accuracy, or preparing it in a well-known state. Such schemes are referred to as quantum non-demolition measurements (QND). Among these observables there is the amplitude of the light field. Indeed, it is possible to exploit a movable mirror to implement a QND scheme [1]. Intensity fluctuations of an optical field impinging on it are not affected by the interaction. However, the movable mirror is excited by the associated radiation pressure. This, in turn, affects the phase of the field.

Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC)•Jun 1, 2017•0 citations

Exploiting Optomechanical Interactions in Quantum Information

Claudiu Genes, David Vitali, Paolo Tombesi

A multipartite quantum system is entangled when its state cannot be factorized into a product of states or a mixture of such products. Quantum information schemes that exploit this purely quantum mechanical feature have been devised initially for systems with two discrete quantum levels (i.e., qubits), and afterward, extended to continuous-variable (CV) systems characterized by observables with continuous spectra, such as the position and momentum of a particle, or the quadratures of an electromagnetic field. Optomechanical systems, such as a driven optical cavity with vibrating end-mirrors or a classical coherent field scattering sidebands off a freely suspended mirror, hold a promise of being candidates for CV quantum information processing applications. As in most other proposals, light is the information carrier; the difference lies in the choice of a micromirror as a quantum storage device. Desired quantum states can be encoded in acoustic modes. The optomechanical coupling, owing to which quantum state transfer between radiation and mirror is possible, is realized via the radiation pressure effect, which consists in momentum transfer between field and mirror during the scattering process. The use of the vibrational modes of a micromirror as a quantum state encoder system is somehow unexpected because this is a macroscopic ensemble of atoms expected to behave rather classically. However, there are proposals that show that, in principle, the vibrational occupation number of even such a large collection of atoms in a solid can be reduced close to zero, which signifies a clear transition from the classical to the quantum regime. Remarkable progress has been made to experimentally cool the resonator by a few orders of magnitude to quite low occupation numbers. However, in order to approach the quantum limit, one needs to integrate small, light, and flexible micromechanical elements into high-finesse cavities (which are typically much more rigid and massive), which is technically challenging. Furthermore, the mechanical quality factor has to be quite high, but present microfabrication techniques yield a mechanical quality factor scaling down for smaller and smaller microresonators. This chapter starts with developing a general framework for treating the dynamics of a driven optical cavity with a vibrating end-mirror system in which two cooling techniques have been recently demonstrated: (i) cold-damping quantum feedback, where the oscillator position is measured through a phase-sensitive detection of the cavity output and the resulting photocurrent is used for a real-time correction of the dynamics, and (ii) backaction or self-cooling, in which the off-resonant operation of the cavity results in a retarded back action on the mechanical system, and hence, in a “self”-modification of its dynamics. The two situations are illustrated in Fig. 24.1. Analytical results for the final phonon number are obtained for both schemes and their applicability within today's state-of-the-art laboratory setups is analyzed.

SPIE eBooks•Mar 16, 2010•0 citations

Towards observation of quantum optomechanical correlations

Daniel Garcia-Sanchez, Alexandros Tavernarakis, Aurélien G. Kuhn +8 more

In an interferometric measurement, the quantum radiation pressure noise, which is due to quantum intracavity intensity fluctuations, gives rise to mirror displacement fluctuations and sets a limit in the displacement sensitivity. We have designed a table-top experiment to demonstrate this effect and realize various quantum optics experiments with an optomechanical system.

•Jan 1, 2013•0 citations

Quantum optomechanics at room temperature

H. Schütz

Why are classical theories often sufficient to describe the physics of our world even though everything around us is entirely composed of microscopic quantum systems? The boundary between these two fundamentally dissimilar theories remains an unsolved problem in modern physics. Position measurements of small objects allow us to probe the area where the classical approximation breaks down. In quantum mechanics, Heisenbergâ s uncertainty principle dictates that any measurement of the position must be accompanied by measurement induced back-action---in this case manifested as an uncertainty in the momentum. In recent years, cavity optomechanics has become a powerful tool to perform precise position measurements and investigate their fundamental limitations. The utilization of optical micro-cavities greatly enhances the interaction between light and state-of-the-art nanomechanical oscillators. Therefore, quantum mechanical phenomena have been successfully observed in systems far beyond the microscopic world. In such a cavity optomechanical system, the fluctuations in the position of the oscillator are transduced onto the phase of the light, while fluctuations in the amplitude of the light disturb the momentum of the oscillator during the measurement. As a consequence, correlations are established between the amplitude and phase quadrature of the probe light. However, so far, observation of quantum effects has been limited exclusively to cryogenic experiments, and access to the quantum regime at room temperature has remained an elusive goal because the overwhelming amount of thermal motion masks the weak quantum effects. This thesis describes the engineering of a high-performance cavity optomechanical device and presents experimental results showing, for the first time, the broadband effects of quantum back-action at room temperature. The device strongly couples mechanical and optical modes of exceptionally high quality factors to provide a measurement sensitivity $\sim\!10^4$ times below the requirement to resolve the zero-point fluctuations of the mechanical oscillator. The quantum back-action is then observed through the correlations created between the probe light and the motion of the nanomechanical oscillator. A so-called â variational measurementâ , which detects the transmitted light in a homodyne detector tuned close to the amplitude quadrature, resolves the quantum noise due to these correlations at the level of 10\% of the thermal noise over more than an octave of Fourier frequencies around mechanical resonance. Moreover, building on this result, an additional experiment demonstrates the ability to achieve quantum enhanced metrology. In this case, the generated quantum correlations are used to cancel quantum noise in the measurement record, which then leads to an improved relative signal-to-noise ratio in measurements of an external force. In conclusion, the successful observation of broadband quantum behavior on a macroscopic object at room temperature is an important milestone in the field of cavity optomechanics. Specifically, this result heralds the rise of optomechanical systems as a platform for quantum physics at room temperature and shows promise for generation of ponderomotive squeezing in room-temperature interferometers.

•Jan 1, 2017•0 citations

Quantum Nondemolition Measurement of a Nonclassical State of a Massive Object

Florent Lecocq, J. B. Clark, Raymond W. Simmonds +2 more

By coupling a macroscopic mechanical oscillator to two microwave cavities, we simultaneously prepare and monitor a nonclassical steady state of mechanical motion. In each cavity, correlated radiation pressure forces induced by two coherent drives engineer the coupling between the quadratures of light and motion. We, first, demonstrate the ability to perform a continuous quantum nondemolition measurement of a single mechanical quadrature at a rate that exceeds the mechanical decoherence rate, while avoiding measurement backaction by more than 13 dB. Second, we apply this measurement technique to independently verify the preparation of a squeezed state in the mechanical oscillator, resolving quadrature fluctuations 20% below the quantum noise.

arXiv:1509.01629•Physical Review X•Dec 7, 2015•256 citations

Quantum-nondemolition measurement of light by a piezoelectric crystal

M. Pinard, Claude Fabre, A. Heidmann

We show that an optical cavity made of mirrors coated on a piezoelectric crystal can provide a quantum-nondemolition measurement of the intensity of a light beam. Due to radiation pressure, the crystal length is sensitive to the light intensity and can be measured by an electric circuit. The intensity fluctuations are not modified by reflection on such a cavity and the quantum correlations between these fluctuations and the output current of the electric circuit can be made very large even at nonzero temperature.

Physical Review A•Mar 1, 1995•27 citations
According to quantum mechanics, if we keep observing a continuous variable we generally disturb its evolution. For a class of observables, however, it is possible to implement a so-called quantum nondemolition measurement: by confining the perturbation to the conjugate variable, the observable is estimated with arbitrary accuracy, or prepared in a well-known state. For instance, when the light bounces on a movable mirror, its intensity is not perturbed (the effect is just seen on the phase of the radiation), but the radiation pressure allows one to trace back its fluctuations by observing the mirror motion. In this work, we implement a cavity optomechanical experiment based on an oscillating micromirror, and we measure correlations between the output light intensity fluctuations and the mirror motion. We demonstrate that the uncertainty of the former is reduced below the shot-noise level determined by the corpuscular nature of light.
According to quantum mechanics, there exists a class of observables for which is possible to confine the perturbation produced by a continuous measurement to the conjugate variable. Therefore, it is possible to devise experimental schemes that allow estimating the observed variable with arbitrary accuracy, or preparing it in a well-known state. Such schemes are referred to as quantum non-demolition measurements (QND). Among these observables there is the amplitude of the light field. Indeed, it is possible to exploit a movable mirror to implement a QND scheme [1]. Intensity fluctuations of an optical field impinging on it are not affected by the interaction. However, the movable mirror is excited by the associated radiation pressure. This, in turn, affects the phase of the field.
A multipartite quantum system is entangled when its state cannot be factorized into a product of states or a mixture of such products. Quantum information schemes that exploit this purely quantum mechanical feature have been devised initially for systems with two discrete quantum levels (i.e., qubits), and afterward, extended to continuous-variable (CV) systems characterized by observables with continuous spectra, such as the position and momentum of a particle, or the quadratures of an electromagnetic field. Optomechanical systems, such as a driven optical cavity with vibrating end-mirrors or a classical coherent field scattering sidebands off a freely suspended mirror, hold a promise of being candidates for CV quantum information processing applications. As in most other proposals, light is the information carrier; the difference lies in the choice of a micromirror as a quantum storage device. Desired quantum states can be encoded in acoustic modes. The optomechanical coupling, owing to which quantum state transfer between radiation and mirror is possible, is realized via the radiation pressure effect, which consists in momentum transfer between field and mirror during the scattering process. The use of the vibrational modes of a micromirror as a quantum state encoder system is somehow unexpected because this is a macroscopic ensemble of atoms expected to behave rather classically. However, there are proposals that show that, in principle, the vibrational occupation number of even such a large collection of atoms in a solid can be reduced close to zero, which signifies a clear transition from the classical to the quantum regime. Remarkable progress has been made to experimentally cool the resonator by a few orders of magnitude to quite low occupation numbers. However, in order to approach the quantum limit, one needs to integrate small, light, and flexible micromechanical elements into high-finesse cavities (which are typically much more rigid and massive), which is technically challenging. Furthermore, the mechanical quality factor has to be quite high, but present microfabrication techniques yield a mechanical quality factor scaling down for smaller and smaller microresonators. This chapter starts with developing a general framework for treating the dynamics of a driven optical cavity with a vibrating end-mirror system in which two cooling techniques have been recently demonstrated: (i) cold-damping quantum feedback, where the oscillator position is measured through a phase-sensitive detection of the cavity output and the resulting photocurrent is used for a real-time correction of the dynamics, and (ii) backaction or self-cooling, in which the off-resonant operation of the cavity results in a retarded back action on the mechanical system, and hence, in a “self”-modification of its dynamics. The two situations are illustrated in Fig. 24.1. Analytical results for the final phonon number are obtained for both schemes and their applicability within today's state-of-the-art laboratory setups is analyzed.
Why are classical theories often sufficient to describe the physics of our world even though everything around us is entirely composed of microscopic quantum systems? The boundary between these two fundamentally dissimilar theories remains an unsolved problem in modern physics. Position measurements of small objects allow us to probe the area where the classical approximation breaks down. In quantum mechanics, Heisenbergâ s uncertainty principle dictates that any measurement of the position must be accompanied by measurement induced back-action---in this case manifested as an uncertainty in the momentum. In recent years, cavity optomechanics has become a powerful tool to perform precise position measurements and investigate their fundamental limitations. The utilization of optical micro-cavities greatly enhances the interaction between light and state-of-the-art nanomechanical oscillators. Therefore, quantum mechanical phenomena have been successfully observed in systems far beyond the microscopic world. In such a cavity optomechanical system, the fluctuations in the position of the oscillator are transduced onto the phase of the light, while fluctuations in the amplitude of the light disturb the momentum of the oscillator during the measurement. As a consequence, correlations are established between the amplitude and phase quadrature of the probe light. However, so far, observation of quantum effects has been limited exclusively to cryogenic experiments, and access to the quantum regime at room temperature has remained an elusive goal because the overwhelming amount of thermal motion masks the weak quantum effects. This thesis describes the engineering of a high-performance cavity optomechanical device and presents experimental results showing, for the first time, the broadband effects of quantum back-action at room temperature. The device strongly couples mechanical and optical modes of exceptionally high quality factors to provide a measurement sensitivity ∼ ⁣104\sim\!10^4∼104 times below the requirement to resolve the zero-point fluctuations of the mechanical oscillator. The quantum back-action is then observed through the correlations created between the probe light and the motion of the nanomechanical oscillator. A so-called â variational measurementâ , which detects the transmitted light in a homodyne detector tuned close to the amplitude quadrature, resolves the quantum noise due to these correlations at the level of 10\% of the thermal noise over more than an octave of Fourier frequencies around mechanical resonance. Moreover, building on this result, an additional experiment demonstrates the ability to achieve quantum enhanced metrology. In this case, the generated quantum correlations are used to cancel quantum noise in the measurement record, which then leads to an improved relative signal-to-noise ratio in measurements of an external force. In conclusion, the successful observation of broadband quantum behavior on a macroscopic object at room temperature is an important milestone in the field of cavity optomechanics. Specifically, this result heralds the rise of optomechanical systems as a platform for quantum physics at room temperature and shows promise for generation of ponderomotive squeezing in room-temperature interferometers.
By coupling a macroscopic mechanical oscillator to two microwave cavities, we simultaneously prepare and monitor a nonclassical steady state of mechanical motion. In each cavity, correlated radiation pressure forces induced by two coherent drives engineer the coupling between the quadratures of light and motion. We, first, demonstrate the ability to perform a continuous quantum nondemolition measurement of a single mechanical quadrature at a rate that exceeds the mechanical decoherence rate, while avoiding measurement backaction by more than 13 dB. Second, we apply this measurement technique to independently verify the preparation of a squeezed state in the mechanical oscillator, resolving quadrature fluctuations 20% below the quantum noise.
We show that an optical cavity made of mirrors coated on a piezoelectric crystal can provide a quantum-nondemolition measurement of the intensity of a light beam. Due to radiation pressure, the crystal length is sensitive to the light intensity and can be measured by an electric circuit. The intensity fluctuations are not modified by reflection on such a cavity and the quantum correlations between these fluctuations and the output current of the electric circuit can be made very large even at nonzero temperature.