A fiber-integrated spectrometer for single-photon pulses outside the telecommunications wavelength range based upon frequency-to-time mapping, implemented by chromatic group delay dispersion (GDD), and precise temporally-resolved single-photon counting, is presented. A chirped fiber Bragg grating provides low-loss GDD, mapping the frequency distribution of an input pulse onto the temporal envelope of the output pulse. Time-resolved detection with fast single-photon-counting modules enables monitoring of a wavelength range from 825 nm to 835 nm with nearly uniform efficiency at 55 pm resolution (24 GHz at 830 nm). To demonstrate the versatility of this technique, spectral interference of heralded single photons and the joint spectral intensity distribution of a photon-pair source are measured. This approach to single-photon-level spectral measurements provides a route to realize applications of time-frequency quantum optics at visible and near-infrared wavelengths, where multiple spectral channels must be simultaneously monitored.
A fiber-integrated spectrometer for single-photon pulses outside the telecommunications wavelength range based upon frequency-to-time mapping, implemented by chromatic group delay dispersion (GDD), and precise temporally-resolved single-photon counting, is presented. A chirped fiber Bragg grating provides low-loss GDD, mapping the frequency distribution of an input pulse onto the temporal envelope of the output pulse. Time-resolved detection with fast single-photon-counting modules enables monitoring of a wavelength range from 825 nm to 835 nm with nearly uniform efficiency at 55 pm resolution (24 GHz at 830 nm). To demonstrate the versatility of this technique, spectral interference of heralded single photons and the joint spectral intensity distribution of a photon-pair source are measured. This approach to single-photon-level spectral measurements provides a route to realize applications of time-frequency quantum optics at visible and near-infrared wavelengths, where multiple spectral channels must be simultaneously monitored.
We present a simple and direct method for measuring laser chirp rate, i.e., group delay dispersion (GDD) of ultrashort laser pulses at power levels compatible with single-quantum-emitter excitation. Traditional pulse characterization techniques rely on nonlinear optical processes that require high peak powers, making them unsuitable for the attojoule regime relevant to on-chip quantum photonics. Our approach utilizes a wavelength-to-time mapping method in which the arrival times of spectrally filtered components of a broadband pulse are recorded using a single-photon detector and correlated via a high-resolution time-tagging system. The resulting linear relationship between wavelength and arrival time directly yields the dispersion parameter and, subsequently, the GDD. We call this technique “WAvelength-Time mapping for CHirp measurement (WATCH).” Beyond single-emitter excitation, this technique can be applied in areas such as single-photon spectroscopy, ultralow-power optical communications, and time-domain quantum control, where linear and non-destructive dispersion characterization is essential.
Quantum physics holds promise to revolutionise a number of technologies by enabling performance beyond what is feasible with classical resources, such as secure communications, precision measurement and high-speed simulation and computation. To realise this, quantum information must be encoded into one of the physical degrees of freedom of light. The time-frequency (TF) domain provides a infinite-dimensional space which is naturally compatible with integrated optical platforms. Additionally, future quantum networks will require coherent coupling of quantum systems that do not necessarily exhibit TF mode overlap. The ability to generate, coherently control and measure a variety of TF states of quantum light is therefore a necessary step towards implementing optical quantum technologies. Developing the building blocks for future optical quantum applications calls for an assortment of methods for measuring the properties of TF states of quantum light. Whilst much progress has been made towards this goal recently, deficiencies with existing methods remain. Efficient spectrally-resolved detection away from the telecoms wavelength range and a robust approach to single-photon state characterisation that is sensitive to the spectral phase have so far proven challenging. Additionally, accessing quantum advantages requires measurements that are sensitive to the nonclassical correlations that can exist between separate subsystems. However, until now a flexible approach to determining the full quantum state of systems of multiple time/frequency entangled photons has been lacking. Here we develop a toolbox of techniques for the measurement of TF quantum states of light for few-photon systems, and apply these to the task of precision measurement. Firstly, we propose, construct and demonstrate efficient single-photon spectrometers based on dispersive time-to-frequency mapping, using chirped fibre Bragg gratings to apply the necessary group delay dispersion. We use two such devices operating in coincidence to realise a full phase-sensitive reconstruction of the TF state of a single photon, by spectrally resolving the output of a nonclassical interference process with an external reference. We also demonstrate a complementary, optical reference-free method. This characterisation tool, an implementation of electro-optic spectral shearing interferometry with coincident spectrally-resolved single-photon detection, melds techniques from ultrafast metrology and quantum optics. We proceed to demonstrate the flexibility of this device by reconstructing a wide range of test pulses generated with a pulse shaper. By implementing this technique in conjunction with spectrally-resolved detection of a second photon, we realise complete characterisation of the TF wave function of a spectrally-entangled broadband photon pair. This method is robust to a wide range of inputs and is generalisable to spectrally mixed states and across a wide range of wavelengths, including to spectrally non-degenerate photon pairs. To demonstrate, we generate an entangled photon pair with controllable TF entanglement and perform a full reconstruction. Lastly, we present a new technique for using TF entangled photon pairs to realise quantum-enhanced measurement of a time delay in a quantum channel in the presence of environmental noise. This scheme is based on entanglement-enhanced rejection of background light. A simple experiment demonstrating the feasibility of such a measurement is presented.
We present a simple and direct method for measuring laser chirp rate, i.e., group delay dispersion (GDD) of ultrashort laser pulses at power levels compatible with single-quantum-emitter excitation. Traditional pulse characterization techniques rely on nonlinear optical processes that require high peak powers, making them unsuitable for the attojoule-to-femtojoule regime relevant to quantum photonics. Our approach utilizes a wavelength-to-time mapping method in which the arrival times of spectrally filtered components of a broadband pulse are recorded using a superconducting nanowire single-photon detector and correlated via a high-resolution time-tagging system. The resulting linear relationship between wavelength and arrival time directly yields the dispersion parameter and, subsequently, the GDD. Beyond single-emitter excitation, this technique can be applied in areas such as single-photon spectroscopy, ultralow-power optical communications, and time-domain quantum control, where linear and non-destructive dispersion characterization is essential.
Time-frequency domain is a promising platform for optical quantum technologies due to large Hilbert space available for quantum information encoding. Moreover, photons appear as perfect candidates for interface between different quantum systems as they can be transmitted over large distances in a low-loss manner. Obviously mostly desired would be such link at telecommunication wavelengths, because it can be integrated with classical communication schemes. We report on a tunable telecom-wavelength photon pair source based on bulk periodically poled potassium titanyl phosphate (PPKTP) pumped by femtosecond laser pulses. The pairs are produced via type-II spontaneous parametric down conversion (SPDC). The spectra of photons, which lies in telecommunication range, in our source can be affected via both changing the spectrum of pumping laser and changing the phase matching by using crystals of different lengths. By appropriate choice of these parameters either the pair of photons occupy single-mode in frequency and is in a separable state or is multimode and entangled [1]. Here we report on experimental active modification the photon pairs’ spectral properties. We employ fast electro-optic temporal phase modulation to induce a deterministic change of photons’ joint spectral intensity (JSI). Central wavelength of one photon is shifted by up to 0.2 nm. The measurement of the spectrum of single photons is based upon frequency to time mapping, implemented by large group delay dispersion (GDD) in chirped fiber Bragg grating (CFBG) [2]. An unprecedented sub-10 pm resolution of correlated single-photon spectral measurements has been achieved. Further work will be done to modify not only the position, but also the shape of JSI by using techniques based on the time-lens principle [3]. References: [1] P. G. Evans, R. S. Bennink, W. P. Grice, T. S. Humble, Phys. Rev. Lett. 105, 253601 (2010) [2] A. O. C. Davis, P. M. Saulnier, M. Karpinski, B. J. Smith, arXiv:1610.03040 (2016) [3] M. Karpiński, M. Jachura, L. J. Wright, B. J. Smith, Nature Photonics 11, 53–57 (2017)
A scalable source of single photons is a key constituent of an efficient quantum photonic architecture. To realize this, it is beneficial to have an ensemble of quantum emitters that can be collectively excited with high efficiency. Semiconductor quantum dots hold great potential in this context due to their excellent photophysical properties. Spectral variability of quantum dots is commonly regarded as a drawback introduced by the fabrication method. However, this is beneficial to realize a frequency-multiplexed single-photon platform. Chirped pulse excitation, relying on the so-called adiabatic rapid passage, is the most efficient scheme to excite a quantum dot ensemble due to its immunity to individual quantum dot parameters. Yet, the existing methods of generating chirped laser pulses to excite a quantum emitter are bulky, lossy, and mechanically unstable, which severely hampers the prospects of a quantum dot photon source. Here, we present a compact, robust, and high-efficiency alternative for chirped pulse excitation of solid-state quantum emitters. Our simple plug-and-play module consists of chirped fiber Bragg gratings, fabricated via femtosecond inscription, to provide high values of dispersion in the near-infrared spectral range, where the quantum dots emit. We characterize and benchmark the performance of our method via chirped excitation of a GaAs quantum dot, establishing high-fidelity single-photon generation. Our highly versatile chirping module coupled to a photon source is a significant milestone toward realizing practical quantum photonic devices.
Abstract Direct measurements on the temporal envelope of quantum light are a challenging task and not many examples are known because most classical pulse characterisation methods do not work on the single-photon level. Knowledge of both spectrum and timing can, however, give insights on properties that cannot be determined by the spectral intensity alone. While temporal measurements on single photons on timescales of tens of picoseconds are possible with superconducting photon detectors, and picosecond measurements have been performed using streak cameras, there are no commercial single-photon sensitive devices with femtosecond resolution available. While time-domain sampling using sum-frequency generation has already been exploited for such a measurement, inefficient conversion has necessitated long integration times to build the temporal profile. We demonstrate a highly efficient waveguided sum-frequency generation process in Lithium Niobate to measure the temporal envelope of single photons with femtosecond resolution with short enough acquisition time to provide a live-view of the measurement. We demonstrate the measurement technique and combine it with spectral measurements using a dispersive-fibre time-of-flight spectrometer to determine upper and lower bounds for the spectral purity of heralded single photons. The approach complements the joint spectral intensity measurements as a measure on the purity can be given without knowledge of the spectral phase.