© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

arXiv:1609.05929 · Journal of Physics D Applied Physics

Model reduction of cavity nonlinear optics for photonic logic: a quasi-principal components approach

Zhan Shi, Hendra I. Nurdin

Published Oct 21, 2016• 3 citations

Abstract

Abstract Kerr nonlinear cavities displaying optical thresholding have been proposed for the realization of ultra-low power photonic logic gates. In the ultra-low photon number regime, corresponding to energy levels in the attojoule scale, quantum input–output models become important to study the effect of unavoidable quantum fluctuations on the performance of such logic gates. However, being a quantum anharmonic oscillator, a Kerr-cavity has an infinite dimensional Hilbert space spanned by the Fock states of the oscillator. This poses a challenge to simulate and analyze photonic logic gates and circuits composed of multiple Kerr nonlinearities. For simulation, the Hilbert of the oscillator is typically truncated to the span of only a finite number of Fock states. This paper develops a quasi-principal components approach to identify important subspaces of a Kerr-cavity Hilbert space and exploits it to construct an approximate reduced model of the Kerr-cavity on a smaller Hilbert space. Using this approach, we find a reduced dimension model with a Hilbert space dimension of 15 that can closely match the magnitudes of the mean transmitted and reflected output fields of a conventional truncated Fock state model of dimension 75, when driven by an input coherent field that switches between two levels. For the same input, the reduced model also closely matches the magnitudes of the mean output fields of Kerr-cavity-based AND and NOT gates and a NAND latch obtained from simulation of the full 75 dimension model.

DOI: 10.1088/0022-3727/49/46/465501

Related papers

Nonlinear interferometry approach to photonic sequential logic

Hideo Mabuchi

Motivated by rapidly advancing capabilities for extensive nanoscale patterning of optical materials, I propose an approach to implementing photonic sequential logic that exploits circuit-scale phase coherence for efficient realizations of fundamental components such as a NAND-gate-with-fanout and a bistable latch. Kerr-nonlinear optical resonators are utilized in combination with interference effects to drive the binary logic. Quantum-optical input-output models are characterized numerically using design parameters that yield attojoule-scale energy separation between the latch states.

arXiv:1108.1594•Applied Physics Letters•Oct 10, 2011•37 citations

Cavity enhanced second-order nonlinear quantum photonic logic circuits

Rahul Trivedi, Uday K. Khankhoje, Arka Majumdar

A large obstacle for realizing quantum photonic logic is the weak optical nonlinearity of available materials, which results in large power consumption. In this paper, we present the theoretical design of all-optical logic with second order ($\chi^{(2)}$) nonlinear bimodal cavities and their networks. Using semiclassical models derived from the Wigner quasi-probability distribution function, we analyze the power consumption and signal-to-noise ratio (SNR) of networks implementing an optical AND gate and an optical latch. Comparison between the second and third order $(\chi^{(3)})$ optical logic reveals that while the $\chi^{(3)}$ design outperforms the $\chi^{(2)}$ design in terms of the SNR for the same input power, employing the $\chi^{(3)}$ nonlinearity necessitates the use of cavities with ultra high quality factors ($Q\sim 10^6$) to achieve gate power consumption comparable to that of the $\chi^{(2)}$ design at significantly smaller quality factors ($Q \sim 10^4$). Using realistic estimates of the $\chi^{(2)}$ and $\chi^{(3)}$ nonlinear susceptibilities of available materials, we show that at achievable quality factors ($Q \sim 10^4$), the $\chi^{(2)}$ design is an order of magnitude more energy efficient than the corresponding $\chi^{(3)}$ design.

•Nov 26, 2015•1 citation

A classical simulation of nonlinear Jaynes–Cummings and Rabi models in photonic lattices

B. M. Rodríguez-Lara, Francisco Soto, Alejandro Zárate Cárdenas +1 more

The interaction of a two-level atom with a single-mode quantized field is one of the simplest models in quantum optics. Under the rotating wave approximation, it is known as the Jaynes-Cummings model and without it as the Rabi model. Real-world realizations of the Jaynes-Cummings model include cavity, ion trap and circuit quantum electrodynamics. The Rabi model can be realized in circuit quantum electrodynamics. As soon as nonlinear couplings are introduced, feasible experimental realizations in quantum systems are drastically reduced. We propose a set of two photonic lattices that classically simulates the interaction of a single two-level system with a quantized field under field nonlinearities and nonlinear couplings as long as the quantum optics model conserves parity. We describe how to reconstruct the mean value of quantum optics measurements, such as photon number and atomic energy excitation, from the intensity and from the field, such as von Neumann entropy and fidelity, at the output of the photonic lattices. We discuss how typical initial states involving coherent or displaced Fock fields can be engineered from recently discussed Glauber-Fock lattices. As an example, the Buck-Sukumar model, where the coupling depends on the intensity of the field, is classically simulated for separable and entangled initial states.

arXiv:1303.5892•Optics Express•May 17, 2013•53 citations

Decoy-state optical quantum information processing with coherent states

Wenyuan Wang, H. F. Chau

Photonic qubits play an important role in quantum information processing. However, to date, efficient high-speed single photon sources and photon number resolving (PNR) detectors are still difficult to make. Here, we use phase-randomized coherent states and threshold detectors, combined with decoy-state post-processing, to simulate single photon sources and PNR detectors and perform various quantum information processing tasks. We propose a simple linear regression method to predict Fock state statistics based on observable statistics from coherent-state probes, combined with random/structured sampling of probe settings. Compared with traditional decoy-state post-processing based on linear programming and Cartesian product grid sampling, our method enables drastically improved accuracy and much reduced probe resources. It works particularly well for unknown unitary circuits of interest with fixed-size Hilbert space dimensions. For instance, it can accurately simulate 4-photon interference in linear optics with just 32 input/output probe settings and 6-photon interference with 256 probe settings. Moreover, it also works for non-unitary (such as lossy, nonlinear, or arbitrary) quantum channels. This enables a wide variety of applications that can be implemented with easily attainable coherent light sources and threshold detectors, such as characterization of small-scale linear optical quantum computing circuits or quantum sensing/metrology devices.

quant-pharXiv:2610.04581•Oct 6, 2026•0 citations

Cavity-QED models of switches for attojoule-scale nanophotonic logic

Hideo Mabuchi

Quantum optical input-output models are described for a class of optical switches based on cavity quantum electrodynamics (QED) with a single multilevel atom (or comparable bound system of charges) coupled simultaneously to several resonant field modes. A recent limit theorem for quantum stochastic differential equations is used to show that such models converge to a simple scattering matrix in a type of strong-coupling limit that seems natural for nanophotonic systems. Numerical integration is used to show that the behavior of the prelimit model approximates that of the simple scattering matrix in a realistic regime for the physical parameters and that it is possible in the proposed cavity-QED configuration for low-power optical signals to switch higher-power signals at attojoule energy scales.

arXiv:0907.2720•Physical Review A•Oct 22, 2009•41 citations

Quantum noise in large-scale coherent nonlinear photonic circuits

Charles Santori, Jason S. Pelc, Raymond G. Beausoleil +3 more

A semiclassical simulation approach is presented for studying quantum noise in large-scale photonic circuits incorporating an ideal Kerr nonlinearity. A circuit solver is used to generate matrices defining a set of stochastic differential equations, in which the resonator field variables represent random samplings of the Wigner quasi-probability distributions. Although the semiclassical approach involves making a large-photon-number approximation, tests on one- and two-resonator circuits indicate satisfactory agreement between the semiclassical and full-quantum simulation results in the parameter regime of interest. The semiclassical model is used to simulate random errors in a large-scale circuit that contains 88 resonators and hundreds of components in total, and functions as a 4-bit ripple counter. The error rate as a function of on-state photon number is examined, and it is observed that the quantum fluctuation amplitudes do not increase as signals propagate through the circuit, an important property for scalability.

arXiv:1402.5983•Feb 24, 2014•1 citation

Abstract Kerr nonlinear cavities displaying optical thresholding have been proposed for the realization of ultra-low power photonic logic gates. In the ultra-low photon number regime, corresponding to energy levels in the attojoule scale, quantum input–output models become important to study the effect of unavoidable quantum fluctuations on the performance of such logic gates. However, being a quantum anharmonic oscillator, a Kerr-cavity has an infinite dimensional Hilbert space spanned by the Fock states of the oscillator. This poses a challenge to simulate and analyze photonic logic gates and circuits composed of multiple Kerr nonlinearities. For simulation, the Hilbert of the oscillator is typically truncated to the span of only a finite number of Fock states. This paper develops a quasi-principal components approach to identify important subspaces of a Kerr-cavity Hilbert space and exploits it to construct an approximate reduced model of the Kerr-cavity on a smaller Hilbert space. Using this approach, we find a reduced dimension model with a Hilbert space dimension of 15 that can closely match the magnitudes of the mean transmitted and reflected output fields of a conventional truncated Fock state model of dimension 75, when driven by an input coherent field that switches between two levels. For the same input, the reduced model also closely matches the magnitudes of the mean output fields of Kerr-cavity-based AND and NOT gates and a NAND latch obtained from simulation of the full 75 dimension model.

Motivated by rapidly advancing capabilities for extensive nanoscale patterning of optical materials, I propose an approach to implementing photonic sequential logic that exploits circuit-scale phase coherence for efficient realizations of fundamental components such as a NAND-gate-with-fanout and a bistable latch. Kerr-nonlinear optical resonators are utilized in combination with interference effects to drive the binary logic. Quantum-optical input-output models are characterized numerically using design parameters that yield attojoule-scale energy separation between the latch states.

A large obstacle for realizing quantum photonic logic is the weak optical nonlinearity of available materials, which results in large power consumption. In this paper, we present the theoretical design of all-optical logic with second order (

\chi^{(2)}

) nonlinear bimodal cavities and their networks. Using semiclassical models derived from the Wigner quasi-probability distribution function, we analyze the power consumption and signal-to-noise ratio (SNR) of networks implementing an optical AND gate and an optical latch. Comparison between the second and third order

(\chi^{(3)})

optical logic reveals that while the

\chi^{(3)}

design outperforms the

\chi^{(2)}

design in terms of the SNR for the same input power, employing the

\chi^{(3)}

nonlinearity necessitates the use of cavities with ultra high quality factors (

Q\sim 10^6

) to achieve gate power consumption comparable to that of the

\chi^{(2)}

design at significantly smaller quality factors (

Q \sim 10^4

). Using realistic estimates of the

\chi^{(2)}

and

\chi^{(3)}

nonlinear susceptibilities of available materials, we show that at achievable quality factors (

Q \sim 10^4

), the

\chi^{(2)}

design is an order of magnitude more energy efficient than the corresponding

\chi^{(3)}

design.

The interaction of a two-level atom with a single-mode quantized field is one of the simplest models in quantum optics. Under the rotating wave approximation, it is known as the Jaynes-Cummings model and without it as the Rabi model. Real-world realizations of the Jaynes-Cummings model include cavity, ion trap and circuit quantum electrodynamics. The Rabi model can be realized in circuit quantum electrodynamics. As soon as nonlinear couplings are introduced, feasible experimental realizations in quantum systems are drastically reduced. We propose a set of two photonic lattices that classically simulates the interaction of a single two-level system with a quantized field under field nonlinearities and nonlinear couplings as long as the quantum optics model conserves parity. We describe how to reconstruct the mean value of quantum optics measurements, such as photon number and atomic energy excitation, from the intensity and from the field, such as von Neumann entropy and fidelity, at the output of the photonic lattices. We discuss how typical initial states involving coherent or displaced Fock fields can be engineered from recently discussed Glauber-Fock lattices. As an example, the Buck-Sukumar model, where the coupling depends on the intensity of the field, is classically simulated for separable and entangled initial states.

Photonic qubits play an important role in quantum information processing. However, to date, efficient high-speed single photon sources and photon number resolving (PNR) detectors are still difficult to make. Here, we use phase-randomized coherent states and threshold detectors, combined with decoy-state post-processing, to simulate single photon sources and PNR detectors and perform various quantum information processing tasks. We propose a simple linear regression method to predict Fock state statistics based on observable statistics from coherent-state probes, combined with random/structured sampling of probe settings. Compared with traditional decoy-state post-processing based on linear programming and Cartesian product grid sampling, our method enables drastically improved accuracy and much reduced probe resources. It works particularly well for unknown unitary circuits of interest with fixed-size Hilbert space dimensions. For instance, it can accurately simulate 4-photon interference in linear optics with just 32 input/output probe settings and 6-photon interference with 256 probe settings. Moreover, it also works for non-unitary (such as lossy, nonlinear, or arbitrary) quantum channels. This enables a wide variety of applications that can be implemented with easily attainable coherent light sources and threshold detectors, such as characterization of small-scale linear optical quantum computing circuits or quantum sensing/metrology devices.

Quantum optical input-output models are described for a class of optical switches based on cavity quantum electrodynamics (QED) with a single multilevel atom (or comparable bound system of charges) coupled simultaneously to several resonant field modes. A recent limit theorem for quantum stochastic differential equations is used to show that such models converge to a simple scattering matrix in a type of strong-coupling limit that seems natural for nanophotonic systems. Numerical integration is used to show that the behavior of the prelimit model approximates that of the simple scattering matrix in a realistic regime for the physical parameters and that it is possible in the proposed cavity-QED configuration for low-power optical signals to switch higher-power signals at attojoule energy scales.

A semiclassical simulation approach is presented for studying quantum noise in large-scale photonic circuits incorporating an ideal Kerr nonlinearity. A circuit solver is used to generate matrices defining a set of stochastic differential equations, in which the resonator field variables represent random samplings of the Wigner quasi-probability distributions. Although the semiclassical approach involves making a large-photon-number approximation, tests on one- and two-resonator circuits indicate satisfactory agreement between the semiclassical and full-quantum simulation results in the parameter regime of interest. The semiclassical model is used to simulate random errors in a large-scale circuit that contains 88 resonators and hundreds of components in total, and functions as a 4-bit ripple counter. The error rate as a function of on-state photon number is examined, and it is observed that the quantum fluctuation amplitudes do not increase as signals propagate through the circuit, an important property for scalability.