One of the main problems that optical quantum computing has to overcome is the efficient construction of two-photon gates. Theoretically these gates can be realized using Kerr-nonlinearities, but the techniques involved are experimentally very difficult. We therefore employ linear optics with projective measurements to generate these non-linearities. The downside is that the measurement-induced nonlinearities achieved with linear optics are less versatile and the success rate can be quite low. This project is mainly the result of a literature study but also a theoretical work on the physics behind quantum optical multiports which is essential for realizing two-photon gates. By applying different postcorrection techniques we increase the probability of success in a modifed non-linear sign shift gate which is foundational for the two photon controlled-NOT gate. We prove that it's not possible to correct the states by only using a single beam splitter. We show that it might be possible to increase the probability of success using a more complex setup with at least two error-correcting beam splitters.
One of the main problems that optical quantum computing has to overcome is the efficient construction of two-photon gates. Theoretically these gates can be realized using Kerr-nonlinearities, but the techniques involved are experimentally very difficult. We therefore employ linear optics with projective measurements to generate these non-linearities. The downside is that the measurement-induced nonlinearities achieved with linear optics are less versatile and the success rate can be quite low. This project is mainly the result of a literature study but also a theoretical work on the physics behind quantum optical multiports which is essential for realizing two-photon gates. By applying different postcorrection techniques we increase the probability of success in a modifed non-linear sign shift gate which is foundational for the two photon controlled-NOT gate. We prove that it's not possible to correct the states by only using a single beam splitter. We show that it might be possible to increase the probability of success using a more complex setup with at least two error-correcting beam splitters.
This thesis covers several topics in optical quantum computation. A quantum computer is a computational device which is able to manipulate information by performing unitary operations on some physical system whose state can be described as a vector (or mixture of vectors) in a Hilbert space. The basic unit of information, called the qubit, is considered to be a system with two orthogonal states, which are assigned logical values of 0 and 1. Photons make excellent candidates to serve as qubits. They have little interactions with the environment. Many operations can be performed using very simple linear optical devices such as beam splitters and phase shifters. Photons can easily be processed through circuit-like networks. Operations can be performed in very short times. Photons are ideally suited for the long-distance communication of quantum information. The great difficulty in constructing an optical quantum computer is that photons naturally interact weakly with one another. This thesis first gives a brief review of two early approaches to optical quantum computation. It will describe how any discrete unitary operation can be performed using a single photon and a network of beam splitters, and how the Kerr effect can be used to construct a two photon logic gate. Second, this work provides a thorough introduction to the linear optical quantum computer developed by Knill, Laflamme, and Milburn. It then presents this author's results on the reliability of this scheme when implemented using imperfect photon detectors. This author finds that quantum computers of this sort cannot be built using current technology. Third, this dissertation describes a method for constructing a linear optical quantum computer using nearly orthogonal coherent states of light as the qubits. It shows how a universal set of logic operations can be performed, including calculations of the fidelity with which these operations may be accomplished. It discusses methods for reducing and correcting errors and recovering from failed operations. Lastly it describes an analysis of the long distance transmission of the coherent state qubits and shows how transmission errors can be corrected.
The first section of the work investigates light modes as a means of implementing optical qubits and qudits. The modes considered are polarization mode, path mode, transverse spatial mode, frequency mode, temporal bin-mode and temporal mode. Subsequently, mathematical model of linear optical elements like beam splitters (BS) and phase shifters are deduced and their capability of representing any single qubit optical gate is exposed. Finally Knill, Laflamme and Milburn (KLM) method of using linear optical elements to promote nonlinear operations based on nonlinear (nondeterministic) sign-flip gate (NS) is explained, and designs of two qubits conditional sign flip gate (c-z1/16) and CNOT gate, both based on KLM method, are demonstrated. So, universal set of quantum gates based on linear optics is possible.
If suitable quantum optical interactions were available, transforming the field mode operators in a nonlinear fashion, the all-photonics platform could be one of the strongest contenders for realizing a quantum computer. While single-photon qubits may be processed directly, “brighter” logical qubits may be embedded in individual oscillator modes, using so-called bosonic codes, for an in-principle fault-tolerant processing. In this paper, we show how elements of all-optical, universal, and fault-tolerant quantum computation can be implemented using only beam splitters together with single-mode cubic phase gates in reasonable numbers, and possibly off-line squeezed-state or single-photon resources. Our approach is based on a decomposition technique combining exact gate decompositions and approximate Trotterization. This allows for efficient decompositions of certain nonlinear continuous-variable multimode gates into the elementary gates, where the few cubic gates needed may even be weak or all identical, thus facilitating potential experiments. The final gate operations include two-mode controlled phase rotation and three-mode Rabi-type Hamiltonian gates, which are shown to be employable for realizing high-fidelity single-photon two-qubit entangling gates or creating high-quality Gottesman-Kitaev-Preskill states. We expect our method to be of general use with various applications, including those that rely on quartic Kerr-type interactions. Published by the American Physical Society 2024
Reliable entangling gates for qubits encoded in single-photon states represent a major challenge on the road to scalable quantum computing architectures based on linear optics. In this work, we present two approaches to develop high-fidelity, near-deterministic controlled-sign-shift gates based on the techniques of quantum gate teleportation. On the one hand, teleportation in a discrete-variable setting, i.e., for qubits, offers unit-fidelity operations but suffers from low success probabilities. Here, we apply recent results on advanced linear optical Bell measurements to reach a near-deterministic regime. On the other hand, in the setting of continuous variables, associated with coherent states, squeezing, and, typically, Gaussian states, teleportation can be performed in a deterministic fashion, but the finite amount of squeezing implies an inevitable deformation of a teleported single-mode state. Using a new generalized form of the nonlinear-sign-shift gate for gate teleportation, we are able to achieve fidelities of the resulting controlled-sign gate above 90. A special focus is also put on a comparison of the two approaches, not only with respect to fidelity and success probability, but also in terms of resource consumption.
We design optimal interferometric schemes for the implementation of two-qubit linear-optical quantum filters diagonal in the computational basis. The filtering is realized by the interference of the two photons encoding the qubits in a multiport linear-optical interferometer, followed by conditioning on presence of a single photon in each output port of the filter. The filter thus operates in the coincidence basis, similarly to many linear-optical unitary quantum gates. The implementation of a filter with linear optics may require an additional overhead in terms of a reduced overall success probability of the filtering and the optimal filters are those that maximize the overall success probability. We discuss in detail the case of symmetric real filters and extend our analysis also to asymmetric and complex filters.
We show that it is possible to reduce the number of two-qubit gates needed for the construction of an arbitrary controlled-unitary transformation by up to 2 times using a tunable controlled-phase gate. On the platform of linear optics, where two-qubit gates can only be achieved probabilistically, our method significantly reduces the amount of components and increases success probability of a two-qubit gate. The experimental implementation of our technique presented in this Letter for a controlled single-qubit unitary gate demonstrates that only one tunable controlled-phase gate is needed instead of two standard controlled-not gates. Thus, not only do we increase the success probability by about 1 order of magnitude (with the same resources), but also avoid the need for conducting quantum nondemolition measurement otherwise required to join two probabilistic gates. Subsequently, we generalize our method to a higher order, showing that n-times controlled gates can be optimized by replacing blocks of controlled-not gates with tunable controlled-phase gates.