Wave functions constructed from electron-pair states can accurately model strong electron correlation effects and are promising approaches especially for larger many-body systems. In this article, we analyze the nature and the type of electron correlation effects that can be captured by wave functions restricted to electron-pair states. We focus on the pair-coupled-cluster doubles (pCCD) ansatz also called the antisymmetric product of the 1-reference orbital geminal (AP1roG) method, combined with an orbital optimization protocol presented in Boguslawski et al. [Phys. Rev. B 89, 201106(R) (2014)], whose performance is assessed against electronic structures obtained form density-matrix renormalization-group reference data. Our numerical analysis covers model systems for strong correlation: the one-dimensional Hubbard model with a periodic boundary condition as well as metallic and molecular hydrogen rings. Specifically, the accuracy of pCCD/AP1roG is benchmarked using the single-orbital entropy, the orbital-pair mutual information, as well as the eigenvalue spectrum of the one-orbital and two-orbital reduced density matrices. Our study indicates that contributions from singly occupied states become important in the strong correlation regime which highlights the limitations of the pCCD/AP1roG method. Furthermore, we examine the effect of orbital rotations within the pCCD/AP1roG model on correlations between orbital pairs.
Wave functions constructed from electron-pair states can accurately model strong electron correlation effects and are promising approaches especially for larger many-body systems. In this article, we analyze the nature and the type of electron correlation effects that can be captured by wave functions restricted to electron-pair states. We focus on the pair-coupled-cluster doubles (pCCD) ansatz also called the antisymmetric product of the 1-reference orbital geminal (AP1roG) method, combined with an orbital optimization protocol presented in Boguslawski et al. [Phys. Rev. B 89, 201106(R) (2014)], whose performance is assessed against electronic structures obtained form density-matrix renormalization-group reference data. Our numerical analysis covers model systems for strong correlation: the one-dimensional Hubbard model with a periodic boundary condition as well as metallic and molecular hydrogen rings. Specifically, the accuracy of pCCD/AP1roG is benchmarked using the single-orbital entropy, the orbital-pair mutual information, as well as the eigenvalue spectrum of the one-orbital and two-orbital reduced density matrices. Our study indicates that contributions from singly occupied states become important in the strong correlation regime which highlights the limitations of the pCCD/AP1roG method. Furthermore, we examine the effect of orbital rotations within the pCCD/AP1roG model on correlations between orbital pairs.
Wave functions based on electron-pair states provide inexpensive and reliable models to describe quantum many-body problems containing strongly correlated electrons, given that broken-pair states have been appropriately accounted for by, for instance, a posteriori corrections. In this article, we analyze the performance of electron-pair methods in predicting orbital-based correlation spectra. We focus on the (orbital-optimized) pair-coupled cluster doubles (pCCD) ansatz with a linearized coupled-cluster (LCC) correction. Specifically, we scrutinize how orbital-based entanglement and correlation measures can be determined from a pCCD-tailored CC wave function. Furthermore, we employ the single-orbital entropy, the orbital-pair mutual information, and the eigenvalue spectra of the two-orbital reduced density matrices to benchmark the performance of the LCC correction for the one-dimensional Hubbard model with the periodic boundary condition as well as the N2 and F2 molecules against density matrix renormalization group reference calculations. Our study indicates that pCCD-LCC accurately reproduces the orbital-pair correlation patterns in the weak correlation limit and for molecules close to their equilibrium structure. Hence, we can conclude that pCCD-LCC predicts reliable wave functions in this regime.
Electron pairs have an illustrious history in chemistry, from powerful concepts to understanding structural stability and reactive changes to the promise of serving as building blocks of quantitative descriptions of the electronic structure of complex molecules and materials. However, traditionally, two-electron wavefunctions (geminals) have not enjoyed the popularity and widespread use of the more standard single-particle methods. This has changed recently, with a renewed interest in the development of geminal wavefunctions as an alternative to describing strongly correlated phenomena. Hence, there is a need to find geminal methods that are accurate, computationally tractable, and do not demand significant input from the user (particularly via cumbersome and often ill-behaved orbital optimization steps). Here, we propose new families of geminal wavefunctions inspired by the pair coupled cluster doubles ansatz. We present a new hierarchy of two-electron wavefunctions that extends the one-reference orbital idea to other geminals. Moreover, we show how to incorporate single-like excitations in this framework without leaving the quasiparticle picture. We explore the role of imposing seniority restrictions on these wavefunctions and benchmark these new methods on model strongly correlated systems.
The Coupled Cluster (CC) method is used to compute the electronic correlation energy in atoms and molecules and often leads to highly accurate results. However, due to its single-reference nature, standard CC in its projected form fails to describe quantum states characterized by strong electronic correlations and multi-reference projective methods become necessary. On the other hand, quantum algorithms for the solution of many-electron problems have also emerged recently. The quantum unitary variant of CC (UCC) with singles and doubles (q-UCCSD) is a popular wavefunction Ansatz for the variational quantum eigensolver algorithm. The variational nature of this approach can lead to significant advantages compared to its classical equivalent in the projected form, in particular, for the description of strong electronic correlation. However, due to the large number of gate operations required in q-UCCSD, approximations need to be introduced in order to make this approach implementable in a state-of-the-art quantum computer. In this work, we evaluate several variants of the standard q-UCCSD Ansatz in which only a subset of excitations is included. In particular, we investigate the singlet and pair q-UCCD approaches combined with orbital optimization. We show that these approaches can capture the dissociation/distortion profiles of challenging systems, such as H4, H2O, and N2 molecules, as well as the one-dimensional periodic Fermi–Hubbard chain. These results promote the future use of q-UCC methods for the solution of challenging electronic structure problems in quantum chemistry.
Perhaps the most important approximations to the electronic structure problem in quantum chemistry are those based on coupled cluster and density functional theories. Coupled cluster theory has been called the ``gold standard'' of quantum chemistry due to the high accuracy that it achieves for weakly correlated systems. Kohn--Sham density functionals based on semilocal approximations are, without a doubt, the most widely used methods in chemistry and material science because of their high accuracy/cost ratio. The root of the success of coupled cluster and density functionals is their ability to efficiently describe the dynamic part of the electron correlation. However, both traditional coupled cluster and density functional approximations may fail catastrophically when substantial static correlation is present. This severely limits the applicability of these methods to a plethora of important chemical and physical problems such as, e.g., the description of bond breaking, transition states, transition metal-, lanthanide- and actinide-containing compounds, and superconductivity. In an attempt to tackle this problem, nonstandard (single-reference) coupled cluster-based techniques that aim to describe static correlation have been recently developed: pair coupled cluster doubles (pCCD) and singlet-paired coupled cluster doubles (CCD0). The ability to describe static correlation in pCCD and CCD0 comes, however, at the expense of important amounts of dynamic correlation so that the high accuracy of standard coupled cluster becomes unattainable. Thus, the reliable and efficient description of static and dynamic correlation in a simultaneous manner remains an open problem for quantum chemistry and many-body theory in general. In this thesis, different ways to combine pCCD and CCD0 with density functionals in order to describe static and dynamic correlation simultaneously (and efficiently) are explored. The combination of wavefunction and density functional methods has a long history in quantum chemistry (practical implementations have appeared in the literature since the 1970s). However, this kind of techniques have not achieved widespread use due to problems such as double counting of correlation and the symmetry dilemma---the fact that wavefunction methods respect the symmetries of Hamiltonian, while modern functionals are designed to work with broken symmetry densities. Here, particular mathematical features of pCCD and CCD0 are exploited to avoid these problems in an efficient manner. The two resulting families of approximations, denoted as pCCD+DFT and CCD0+DFT, are shown to be able to describe static and dynamic correlation in standard benchmark calculations. Furthermore, it is also shown that CCD0+DFT lends itself to combination with correlation from the direct random phase approximation (dRPA). Inclusion of dRPA in the long-range via the technique of range-separation allows for the description of dispersion correlation, the remaining part of the correlation. Thus, when combined with the dRPA, CCD0+DFT can account for all three-types of electron correlation that are necessary to accurately describe molecular systems. Lastly, applications of CCD0+DFT to actinide chemistry are considered in this work. The accuracy of CCD0+DFT for predicting equilibrium geometries and vibrational frequencies of actinide molecules and ions is assessed and compared to that of well-established quantum chemical methods. For this purpose, the f0 actinyl series (UO22+, NpO23+, PuO24+), the isoelectronic NUN, and Thorium (ThO, ThO2+) and Nobelium (NoO, NoO2) oxides are studied. It is shown that the CCD0+DFT description of these species agrees with available experimental data and is comparable with the results given by the highest-level calculations that are possible for such heavy compounds while being, at least, an order of magnitude lower in computational cost.
The Lewis electron-pair picture pervades all of chemistry and a substantialdomain of materials science. “Geminals” are electron-pair quantum states whichare used to express approximate solutions of the Schrödinger equation of polyelec-tronic systems. In quantum chemistry, geminal-based methods are potentially moreeffective than the traditional ones based on the orbital picture: electrons occupyorbitals and experience only the average effect of each other. This is especially truefor strongly correlated-systems. However, the computational cost of using arbitrarygeminal wave functions is non-polynomial in the system size.It is therefore an important challenge to find additional constraints on geminalmodels which preserve the accuracy of the wavefunction description while reducingthe calculations to polynomial cost. The Ayers’ group at Mc Master has developedone such successful geminal model called AP1roG because the wavefunction is anantisymmetric product of geminals with one distinct reference orbital occupied ineach geminal [1]. This ansatz relaxes the so-called “strong-orthogonality” constraintbetween geminals. The latter makes wavefunction matrix element computationsvery easy but appears too drastic from the physical point of view, since the geminalelectron pairs are then distinguishable.We have followed a different path to relax the strong-orthogonality constraint. Wehave defined the geometrical concept of n-orthogonality [2] which can be viewed asa graded indistinguishability measure for electronic states: 1-orthogonality coincideswith strong orthogonality, the larger n the less distinguishable the n-orthogonal elec-tronic states will be. We have studied geminal models constrained by n-orthogonalityrelations for different values of n, imposed to different combinations of geminal prod-uct states [3]. However, in this work the scaling of matrix element computations wasstill unsatisfactory. We will present new ideas developed since then to remedy thisproblem.References[1] P. A Limacher, P. W. Ayers, P. A. Johnson, S. De Baerdemacker, D. Van Neck and P. Bultinck, J. of Chem. Theory and Computation 9, 1394-1401 (2013).[2] P. Cassam-Chenaı̈, Phys. Rev. A77, 032103 (2008).[3] P. Cassam-Chenaı̈, V. Rassolov, Chem. Phys. Lett. 487, 147-152 (2010).
In this review, we discuss the recent progress in developing geminal-based theories for challenging problems in quantum chemistry. Specifically, we focus on the antisymmetrized geminal power, generalized valence bond, antisymmetrized product of strongly orthogonal geminals, singlet-type orthogonal geminals, the antisymmetric product of 1-reference orbital geminal, also known as the pair coupled cluster doubles ansatz, and geminals constructed from Richardson-Gaudin states. Furthermore, we review various corrections to account for the missing dynamical correlation effects in geminal models and possible extensions to target electronically excited states and open-shell species. Finally, we discuss some numerical examples and present-day challenges for geminal-based models, including a quantitative and qualitative analysis of wave functions, and software availability.