We design and realise a hybrid interferometer consisting of three paths based on integrated as well as on bulk optical components. This hybrid construction offers a good compromise between stability and footprint on one side and means of intervention on the other. As experimentally verified by the absence of higher-order interferences, amplitude and phase can be manipulated in all paths independently. In conjunction with single photons, the setup can, therefore, be applied for fundamental investigations on quantum mechanics.
We design and realise a hybrid interferometer consisting of three paths based on integrated as well as on bulk optical components. This hybrid construction offers a good compromise between stability and footprint on one side and means of intervention on the other. As experimentally verified by the absence of higher-order interferences, amplitude and phase can be manipulated in all paths independently. In conjunction with single photons, the setup can, therefore, be applied for fundamental investigations on quantum mechanics.
Multi-mode interferometers can be used for a wide range of applications. They allow a higher precision for a phase measurement compared to a simple two-mode version [1, 2]. In quantum optics, schemes for enhancement of non-classical visibility [3] as well as better resilience to photon loss [4] have been proposed. All these schemes depend on a good stability of the used interferometer, which gives integrated optics, such as laser-written waveguides [5], a natural advantage over bulk-optics. Furthermore, waveguide interferometers always ensure perfect mode overlap at the recombiner, yielding higher interference contrast. For some experiments investigating fundamentals of quantum mechanics there is also a need for an individual manipulation and switching of each path [6-10].
Beamsplitters represent fundamental components in both classical and quantum optical systems, enabling the distribution of light, as well as the generation of interference, superposition and entanglement. However, optical networks constructed from conventional bulk 2x2-beamsplitters encounter inherent scalability issues, as the number of required beamsplitters scales quadratically with the number of optical modes for a fully connected network. Metasurfaces offer a promising route to overcome these constraints. By manipulating light at the wavelength scale compact optical components with advanced functionalities can be constructed, which address several modes simultaneously. In this work, we design and experimentally utilize a metasurface as a multiport beamsplitter. Furthermore, we realize a multimode interferometer composed of two cascaded metasurfaces. We characterize the individual and cascaded metasurfaces using classical light, showing controllable splitting ratios through tunable phase relations. We then expand the approach to quantum light, employing single photons to demonstrate second- and third-order photon correlations, as well as single photon interference across multiple spatial paths. These results establish metasurface-based multiport beamsplitters as a scalable and reconfigurable platform bridging classical and quantum photonics.
Integrated photonic circuits with many input and output modes are essential in applications ranging from conventional optical telecommunication networks, to the elaboration of photonic qubits in the integrated quantum information framework. In particular, the latter field has been object in the recent years of an increasing interest: the compactness and phase stability of integrated waveguide circuits are enabling experiments unconceivable with bulk-optics set-ups. Linear photonic devices for quantum information are based on quantum and classical interference effects: the desired circuit operation can be achieved only with tight fabrication control on both power repartition in splitting elements and phase retardance in the various paths. Here we report on a novel three-dimensional circuit architecture, made possible by the unique capabilities of femtosecond laser waveguide writing, which enables us to realize integrated multimode devices implementing arbitrary linear transformations. Networks of cascaded directional couplers can be built with independent control on the splitting ratios and the phase shifts in each branch. In detail, we show an arbitrarily designed 5×5 integrated interferometer: characterization with one- and two-photon experiments confirms the accuracy of our fabrication technique. We exploit the fabricated circuit to implement a small instance of the boson-sampling experiments with up to three photons, which is one of the most promising approaches to realize phenomena hard to simulate with classical computers. We will further show how, by studying classical and quantum interference in many random multimode circuits, we may gain deeper insight into the bosonic coalescence phenomenon.
Within the established theoretical framework of quantum mechanics, interference always occurs between pairs of paths through an interferometer.Higher order interferences with multiple constituents are excluded by Born's rule and can only exist in generalized probabilistic theories.Thus, high-precision experiments searching for such higher order interferences are a powerful method to distinguish between quantum mechanics and more general theories.Here, we perform such a test in an optical multi-path interferometer, which avoids crucial systematic errors, has access to the entire phase space and is more stable than previous experiments.Our results are in accordance with quantum mechanics and rule out the existence of higher order interference terms in optical interferometry to an extent that is more than four orders of magnitude smaller than the expected pairwise interference, refining previous bounds by two orders of magnitude.
Quantum information science aims to harness uniquely quantum mechanical properties to enhance measurement and information technologies, and to explore fundamental aspects of quantum physics. Of the various approaches to quantum computing [1], photons are particularly appealing for their low-noise properties and ease of manipulation at the single qubit level [2]. Encoding quantum information in photons is also an appealing approach to quantum communication, metrology (eg. [3]), measurement (eg. [4]) and other quantum technologies [5]. However, the implementation of optical quantum circuits with bulk optics has reached practical limits. We have developed an integrated waveguide approach to photonic quantum circuits for high performance, miniaturisation and scalability [6]. Here we report high-fidelity silica-on-silicon integrated optical realisations of key quantum photonic circuits, including two-photon quantum interference and a controlled-NOT logic gate [7]. We have demonstrated controlled manipulation of up to four photons on-chip, including high-fidelity single qubit operations, using a lithographically patterned resistive phase shifter [8]. We have used this architecture to implement a small-scale compiled version of Shorʼs quantum factoring algorithm [9] and demonstrated heralded generation of tuneable four photon entangled states from a six photon input [10]. We have combined waveguide photonic circuits with superconducting single photon detectors [11]. We describe complex quantum interference behaviour in multi-mode interference devices with up to eight inputs and outputs [12], and quantum walks of correlated particles in arrays of coupled waveguides [13]. Finally, we give an overview of our recent work on fundamental aspects of quantum measurement [14,15] and single photon sources [16,17].
Integrated photonics promises solutions to questions of stability, complexity, and size in quantum optics. Advances in tunable and non-planar integrated platforms, such as laser-inscribed photonics, continue to bring the realisation of quantum advantages in computation and metrology ever closer, perhaps most easily seen in multi-path interferometry. Here we demonstrate control of two-photon interference in a chip-scale 3D multi-path interferometer, showing a reduced periodicity and enhanced visibility compared to single photon measurements. Observed non-classical visibilities are widely tunable, and explained well by theoretical predictions based on classical measurements. With these predictions we extract Fisher information approaching a theoretical maximum. Our results open a path to quantum enhanced phase measurements.