Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:1604.04490 · Physical Review A

Loss-tolerant parity measurement for distant quantum bits

Alain Sarlette, Mazyar Mirrahimi

Published Mar 27, 2017• 3 citations
arXivHTMLPDF

Abstract

We propose a scheme to measure the parity of two distant qubits, while ensuring that losses on the quantum channel between them does not destroy coherences within the parity subspaces. This capability enables deterministic preparation of highly entangled qubit states whose fidelity is not limited by the transmission loss. The key observation is that, for a probe electromagnetic field in a particular quantum state; namely, a superposition of two coherent states of opposite phases, the transmission loss stochastically applies a near-unitary backaction on the probe state. This leads to a parity measurement protocol where the main effect of the transmission losses is a decrease in the measurement strength. By repeating the nondestructive (weak) parity measurement, one achieves a high-fidelity entanglement in spite of a significant transmission loss.

DOI
10.1103/physreva.95.032329

Related papers

Loss-tolerant parity measurement for distant quantum bits

Alain Sarlette, Mazyar Mirrahimi

Thanks to cat-state probes, we propose a scheme to measure the parity of two distant qubits, while ensuring that losses on the quantum channel between them does not destroy coherences within the parity subspaces.

Quantum Information and Measurement (QIM)•Jan 1, 2017•1 citation

Fault tolerant remote parity detection and entanglement stabilization

Alain Sarlette, Mazyar Mirrahimi

Thanks to cat-state probes, we propose a scheme to measure the parity of twodistant qubits, while ensuring that losses on the quantum channel between them does notdestroy coherences within the parity subspaces.

•Apr 1, 2017•0 citations

High-fidelity feedback-assisted parity measurement in circuit QED

Lars Tornberg, Göran Johansson

We analyze a two-qubit parity measurement based on dispersive readout in circuit quantum electrodynamics. The back action on the qubits has two qualitatively different contributions. One is an unavoidable dephasing in one of the parity subspaces, arising during the transient time of switching on the measurement. The other part is a stochastic rotation of the phase in the same subspace, which persists during the whole measurement. The latter can be determined from the full measurement record using the method of state estimation. Our main result is that the outcome of this phase determination process is independent of the initial state in the state estimation procedure. The procedure can thus be used in a measurement situation where the initial state is unknown. We discuss how this feedback method can be used to achieve a high-fidelity parity measurement for moderate values of the cavity-qubit coupling strength. Finally, we discuss the robustness of the feedback procedure toward errors in the measurement record.

arXiv:1003.5488•Physical Review A•Jul 26, 2010•41 citations

Loss-tolerant concatenated Bell-state measurement with encoded coherent-state qubits for long-range quantum communication

Seok-Hyung Lee, Seung-Woo Lee, Hyunseok Jeong

The coherent-state qubit is a promising candidate for optical quantum information processing due to its nearly deterministic nature of the Bell-state measurement (BSM). However, its nonorthogonality incurs difficulties such as the failure of the BSM. One may use a large amplitude $(\ensuremath{\alpha})$ for the coherent state to minimize the failure probability, but the qubit then becomes more vulnerable to dephasing by photon loss. We propose a hardware-efficient concatenated BSM (CBSM) scheme with modified parity encoding using coherent states with reasonably small amplitudes $(|\ensuremath{\alpha}|⪅2)$, which simultaneously suppresses both failures and dephasing in the BSM procedure. We numerically show that the CBSM scheme achieves a success probability arbitrarily close to unity for appropriate values of $\ensuremath{\alpha}$ and sufficiently low photon loss rates (e.g., $⪅5%$). Furthermore, we verify that the quantum repeater scheme exploiting the CBSM scheme for quantum error correction enables one to carry out efficient long-range quantum communication over 1000 km. We show that the performance is comparable to those of other up-to-date methods and even exceeds them in some cases. Finally, we present methods to prepare logical qubits under modified parity encoding, and we implement elementary logical operations, which consist of several physical-level ingredients such as generation of superpositions of coherent states (SCSs) and elementary gates under the coherent-state basis. We then estimate the effects of imperfect physical-level elements on the performance of the scheme. Our work demonstrates that the encoded coherent-state qubits in free-propagating fields provide an alternative route to fault-tolerant information processing, especially to long-range quantum communication.

arXiv:2102.04071•Physical Review Research•Dec 21, 2021•2 citations

Fast high-fidelity parity measurement of spin qubits in quantum dots using modulated pulses

Xingyu Zhu, Tao Tu, Guang‐Can Guo +1 more

Spin qubits in semiconductor quantum dots are a promising candidate for scalable quantum computation. A key step in quantum error correction with spin qubits is the capability to perform high-fidelity parity measurement much faster than the coherence time and to generate entanglement deterministically. Here we propose a parity measurement scheme for two spin qubits by modulated pulses, using a superconducting resonator as a detector. We show that the distinction between spin-parity states can be achieved with a high fidelity within a short measurement time. The combination of parity measurement and feedback control allows the deterministic preparation of various spin entangled states. In addition, the method can be directly applied to parity measurements and surface codes of multiple spin qubits. These results pave the way for fault-tolerant quantum computation with spin qubits.

Physical Review A•Mar 27, 2023•3 citations

Flying-cat parity checks for quantum error correction

Z. M. McIntyre, W. A. Coish

Long range, multiqubit parity checks have applications in both quantum error correction and measurement-based entanglement generation. Such parity checks could be performed using qubit-state-dependent phase shifts on propagating pulses of light described by coherent states | α 〉 of the electromagnetic field. We consider “flying-cat” parity checks based on an entangling operation that is quantum nondemolition for Schrödinger's cat states | α 〉 ± | − α 〉 . This operation encodes parity information in the phase of maximally distinguishable coherent states | ± α 〉 , which can be read out using a phase-sensitive measurement of the electromagnetic field. In contrast to many implementations, where single-qubit errors and measurement errors can be treated as independent, photon loss during flying-cat parity checks introduces errors on physical qubits at a rate that is anticorrelated with the probability for measurement errors. We analyze this trade-off for three-qubit parity checks, which are a requirement for universal fault-tolerant quantum computing with the subsystem surface code. We further show how a six-qubit entangled “tetrahedron” state can be prepared using these three-qubit parity checks. The tetrahedron state can be used as a resource for controlled quantum teleportation of a two-qubit state or as a source of shared randomness with potential applications in three-party quantum key distribution. Finally, we provide conditions for performing high-quality flying-cat parity checks in a state-of-the-art circuit QED architecture, accounting for qubit decoherence, internal cavity losses, and finite-duration pulses, in addition to transmission losses. Published by the American Physical Society 2024

arXiv:2402.17001•Physical Review Research•Jun 4, 2024•3 citations
We propose a scheme to measure the parity of two distant qubits, while ensuring that losses on the quantum channel between them does not destroy coherences within the parity subspaces. This capability enables deterministic preparation of highly entangled qubit states whose fidelity is not limited by the transmission loss. The key observation is that, for a probe electromagnetic field in a particular quantum state; namely, a superposition of two coherent states of opposite phases, the transmission loss stochastically applies a near-unitary backaction on the probe state. This leads to a parity measurement protocol where the main effect of the transmission losses is a decrease in the measurement strength. By repeating the nondestructive (weak) parity measurement, one achieves a high-fidelity entanglement in spite of a significant transmission loss.
We analyze a two-qubit parity measurement based on dispersive readout in circuit quantum electrodynamics. The back action on the qubits has two qualitatively different contributions. One is an unavoidable dephasing in one of the parity subspaces, arising during the transient time of switching on the measurement. The other part is a stochastic rotation of the phase in the same subspace, which persists during the whole measurement. The latter can be determined from the full measurement record using the method of state estimation. Our main result is that the outcome of this phase determination process is independent of the initial state in the state estimation procedure. The procedure can thus be used in a measurement situation where the initial state is unknown. We discuss how this feedback method can be used to achieve a high-fidelity parity measurement for moderate values of the cavity-qubit coupling strength. Finally, we discuss the robustness of the feedback procedure toward errors in the measurement record.
The coherent-state qubit is a promising candidate for optical quantum information processing due to its nearly deterministic nature of the Bell-state measurement (BSM). However, its nonorthogonality incurs difficulties such as the failure of the BSM. One may use a large amplitude $(\ensuremath{\alpha})$ for the coherent state to minimize the failure probability, but the qubit then becomes more vulnerable to dephasing by photon loss. We propose a hardware-efficient concatenated BSM (CBSM) scheme with modified parity encoding using coherent states with reasonably small amplitudes $(|\ensuremath{\alpha}|⪅2)$, which simultaneously suppresses both failures and dephasing in the BSM procedure. We numerically show that the CBSM scheme achieves a success probability arbitrarily close to unity for appropriate values of $\ensuremath{\alpha}$ and sufficiently low photon loss rates (e.g., ⪅5⪅5%⪅5). Furthermore, we verify that the quantum repeater scheme exploiting the CBSM scheme for quantum error correction enables one to carry out efficient long-range quantum communication over 1000 km. We show that the performance is comparable to those of other up-to-date methods and even exceeds them in some cases. Finally, we present methods to prepare logical qubits under modified parity encoding, and we implement elementary logical operations, which consist of several physical-level ingredients such as generation of superpositions of coherent states (SCSs) and elementary gates under the coherent-state basis. We then estimate the effects of imperfect physical-level elements on the performance of the scheme. Our work demonstrates that the encoded coherent-state qubits in free-propagating fields provide an alternative route to fault-tolerant information processing, especially to long-range quantum communication.
Spin qubits in semiconductor quantum dots are a promising candidate for scalable quantum computation. A key step in quantum error correction with spin qubits is the capability to perform high-fidelity parity measurement much faster than the coherence time and to generate entanglement deterministically. Here we propose a parity measurement scheme for two spin qubits by modulated pulses, using a superconducting resonator as a detector. We show that the distinction between spin-parity states can be achieved with a high fidelity within a short measurement time. The combination of parity measurement and feedback control allows the deterministic preparation of various spin entangled states. In addition, the method can be directly applied to parity measurements and surface codes of multiple spin qubits. These results pave the way for fault-tolerant quantum computation with spin qubits.
Long range, multiqubit parity checks have applications in both quantum error correction and measurement-based entanglement generation. Such parity checks could be performed using qubit-state-dependent phase shifts on propagating pulses of light described by coherent states | α 〉 of the electromagnetic field. We consider “flying-cat” parity checks based on an entangling operation that is quantum nondemolition for Schrödinger's cat states | α 〉 ± | − α 〉 . This operation encodes parity information in the phase of maximally distinguishable coherent states | ± α 〉 , which can be read out using a phase-sensitive measurement of the electromagnetic field. In contrast to many implementations, where single-qubit errors and measurement errors can be treated as independent, photon loss during flying-cat parity checks introduces errors on physical qubits at a rate that is anticorrelated with the probability for measurement errors. We analyze this trade-off for three-qubit parity checks, which are a requirement for universal fault-tolerant quantum computing with the subsystem surface code. We further show how a six-qubit entangled “tetrahedron” state can be prepared using these three-qubit parity checks. The tetrahedron state can be used as a resource for controlled quantum teleportation of a two-qubit state or as a source of shared randomness with potential applications in three-party quantum key distribution. Finally, we provide conditions for performing high-quality flying-cat parity checks in a state-of-the-art circuit QED architecture, accounting for qubit decoherence, internal cavity losses, and finite-duration pulses, in addition to transmission losses. Published by the American Physical Society 2024