In order to guarantee the output of a quantum computation, we usually assume that the component devices are trusted. However, when the total computation process is large, it is not easy to guarantee the whole system when we have scaling effects, unexpected noise, or unaccounted for correlations between several subsystems. If we do not trust the measurement basis or the prepared entangled state, we do need to be worried about such uncertainties. To this end, we propose a self-guaranteed protocol for verification of quantum computation under the scheme of measurement-based quantum computation where no prior-trusted devices (measurement basis or entangled state) are needed. The approach we present enables the implementation of verifiable quantum computation using the measurement-based model in the context of a particular instance of delegated quantum computation where the server prepares the initial computational resource and sends it to the client, who drives the computation by single-qubit measurements. Applying self-testing procedures, we are able to verify the initial resource as well as the operation of the quantum devices and hence the computation itself. The overhead of our protocol scales with the size of the initial resource state to the power of 4 times the natural logarithm of the initial state's size.
In order to guarantee the output of a quantum computation, we usually assume that the component devices are trusted. However, when the total computation process is large, it is not easy to guarantee the whole system when we have scaling effects, unexpected noise, or unaccounted for correlations between several subsystems. If we do not trust the measurement basis or the prepared entangled state, we do need to be worried about such uncertainties. To this end, we propose a self-guaranteed protocol for verification of quantum computation under the scheme of measurement-based quantum computation where no prior-trusted devices (measurement basis or entangled state) are needed. The approach we present enables the implementation of verifiable quantum computation using the measurement-based model in the context of a particular instance of delegated quantum computation where the server prepares the initial computational resource and sends it to the client, who drives the computation by single-qubit measurements. Applying self-testing procedures, we are able to verify the initial resource as well as the operation of the quantum devices and hence the computation itself. The overhead of our protocol scales with the size of the initial resource state to the power of 4 times the natural logarithm of the initial state's size.
Verifiable blind quantum computation provides a cloud scenario for scalable quantum information processing. However, constructing one resource-efficient verification protocol is still an open problem. In this paper, the context of verification we consider is the measurement-based model, in which the client receives the graph state prepared by the server and performs single-qubit measurements on it to drive the computation. We first utilize three entanglement witnesses to estimate the fidelity of the prepared graph state. Applying entanglement witnesses to design the test phase, we propose verification protocols. Our protocol requires overhead in terms of copies of the graph state that scales as O(n2logn), where n is the number of qubits of the graph state. Furthermore, the soundness of our protocol is improved. The advantages of our protocol are derived from the fact that each entanglement witness can be implemented by the client with a fixed number of measurement settings.
Self-testing is a method to characterise an arbitrary quantum system based only on its classical input-output correlations, and plays an important role in device-independent quantum information processing as well as quantum complexity theory. Prior works on self-testing require the assumption that the system’s state is shared among multiple parties that only perform local measurements and cannot communicate. Here, we replace the setting of multiple non-communicating parties, which is difficult to enforce in practice, by a single computationally bounded party. Specifically, we construct a protocol that allows a classical verifier to robustly certify that a single computationally bounded quantum device must have prepared a Bell pair and performed single-qubit measurements on it, up to a change of basis applied to both the device’s state and measurements. This means that under computational assumptions, the verifier is able to certify the presence of entanglement, a property usually closely associated with two separated subsystems, inside a single quantum device. To achieve this, we build on techniques first introduced by Brakerski et al. (2018) and Mahadev (2018) which allow a classical verifier to constrain the actions of a quantum device assuming the device does not break post-quantum cryptography.
Self-testing is a method to characterise an arbitrary quantum system based only on its classical input-output correlations, and plays an important role in device-independent quantum information processing as well as quantum complexity theory. Prior works on self-testing require the assumption that the system's state is shared among multiple parties that only perform local measurements and cannot communicate. Here, we replace the setting of multiple non-communicating parties, which is difficult to enforce in practice, by a single computationally bounded party. Specifically, we construct a protocol that allows a classical verifier to robustly certify that a single computationally bounded quantum device must have prepared a Bell pair and performed single-qubit measurements on it, up to a change of basis applied to both the device's state and measurements. This means that under computational assumptions, the verifier is able to certify the presence of entanglement, a property usually closely associated with two separated subsystems, inside a single quantum device. To achieve this, we build on techniques first introduced by Brakerski et al. (2018) and Mahadev (2018) which allow a classical verifier to constrain the actions of a quantum device assuming the device does not break post-quantum cryptography.
Self-testing is a method to characterise an arbitrary quantum system based only on its classical input-output correlations, and plays an important role in device-independent quantum information processing as well as quantum complexity theory. Prior works on self-testing require the assumption that the system’s state is shared among multiple parties that only perform local measurements and cannot communicate. Here, we replace the setting of multiple non-communicating parties, which is difficult to enforce in practice, by a single computationally bounded party. Specifically, we construct a protocol that allows a classical verifier to robustly certify that a single computationally bounded quantum device must have prepared a Bell pair and performed single-qubit measurements on it, up to a change of basis applied to both the device’s state and measurements. This means that under computational assumptions, the verifier is able to certify the presence of entanglement, a property usually closely associated with two separated subsystems, inside a single quantum device. To achieve this, we build on techniques first introduced by Brakerski et al. (2018) and Mahadev (2018) which allow a classical verifier to constrain the actions of a quantum device assuming the device does not break post-quantum cryptography.
Quantum computers promise to offer a considerable speed-up in solving certain problems, compared to the best classical algorithms. In many instances, the gap between quantum and classical running times is conjectured to be exponential. While this is great news for those applications where quantum computers would provide such an advantage, it also raises a significant challenge: how can classical computers verify the correctness of quantum computations? In attempting to answer this question, a number of protocols have been developed in which a classical client (referred to as verifier) can interact with one or more quantum servers (referred to as provers) in order to certify the correctness of a quantum computation performed by the server(s). These protocols are of one of two types: either there are multiple non-communicating provers, sharing entanglement, and the verifier is completely classical; or, there is a single prover and the classical verifier has a device for preparing or measuring quantum states. The latter type of protocols are, arguably, more relevant to near term quantum computers, since having multiple quantum computers that share a large amount of entanglement is, from a technological standpoint, extremely challenging. Before the realisation of practical single-prover protocols, a number of challenges need to be addressed: how robust are these protocols to noise on the verifier's device? Can the protocols be made fault-tolerant without significantly increasing the requirements of the verifier? How do we know that the verifier's device is operating correctly? Could this device be eliminated completely, thus having a protocol with a fully classical verifier and a single quantum prover? Our work attempts to provide answers to these questions. First, we consider a single-prover verification protocol developed by Fitzsimons and Kashefi and show that this protocol is indeed robust with respect to deviations on the quantum state prepared by the verifier. We show that this is true even if those deviations are the result of a correlation with the prover's system. We then use this result to give a verification protocol which is device- independent. The protocol consists of a verifier with a measurement device and a single prover. Device-independence means that the verifier need not trust the measurement device (nor the prover) which can be assumed to be fully malicious (though not communicating with the prover). A key element in realising this protocol is a robust technique of Reichardt, Unger and Vazirani for testing, using non-local correlations, that two untrusted devices share a large number of entangled states. This technique is referred to as rigidity of non-local correlations. Our second result is to prove a rigidity result for a type of quantum correlations known as steering correlations. To do this, we first show that steering correlations can be used in order to certify maximally entangled states, in a setting in which each test is independent of the previous one. We also show that the fidelity with which we characterise the state, in this specific test, is optimal. We then improve the previous result by removing the independence assumption. This then leads to our desired rigidity result. We make use of it, in a similar fashion to the device-independent case, in order to give a verification protocol that is one-sided device-independent. The importance of this application is to show how different trust assumptions affect the efficiency of the protocol. Next, we describe a protocol for fault-tolerantly verifying quantum computations, with minimal "quantum requirements" for the verifier. Specifically, the verifier only requires a device for measuring single-qubit states. Both this device, and the prover's operations are assumed to be prone to errors. We show that under standard assumptions about the error model, it is possible to achieve verification of quantum computation using fault-tolerant principles. As a proof of principle, and to better illustrate the inner workings of the protocol, we describe a toy implementation of the protocol in a quantum simulator, and present the results we obtained, when running it for a small computation. Finally, we explore the possibility of having a verification protocol, with a classical verifier and a single prover, such that the prover is blind with respect to the verifier's computation. We give evidence that this is not possible. In fact, our result is only concerned with blind quantum computation with a classical client, and uses complexity theoretic results to argue why it is improbable for such a protocol to exist. We then use these complexity theoretic techniques to show that a client, with the ability to prepare and send quantum states to a quantum server, would not be able to delegate arbitrary NP problems to that server. In other words, even a client with quantum capabilities cannot exploit those capabilities to delegate the computation of NP problems, while keeping the input, to that computation, private. This is again true, provided certain complexity theoretic conjectures are true.
How can a user with limited quantum resources verify the output of an untrusted, fully quantum server? This manuscript provides a conceptual synthesis of some recent developments toward answering this question under statistical (information-theoretic) security. Rather than duplicating the dense technical proofs of the underlying publications, our focus here is on the physical motivations, the structural connections between different protocols, and the path toward hardware-efficient implementation.
We begin by introducing a modular, composable framework that partitions verification into three distinct, independent primitives: remote state preparation, trap-based deviation detection, and error-correcting embedding. Using this framework, we show how the demanding hardware requirements of early protocols can be systematically relaxed. We review schemes that eliminate the spatial overhead, remove the need to prepare computational-basis dummy states, and replace single-photon sources with trusted local rotations or weak coherent pulses. Finally, we examine how these techniques scale, both to asymmetric multi-party settings and to the delegation of fully fault-tolerant computations in the presence of gate-level noise. This document is intended as a guide to the architectural principles of practical quantum verification.